Wildview STC-TGL1 Manuale utente

STC-TGL1

User’s Manual

Toll Free Customer Support 1-888-304-6125

www.wildviewcam.com

Version 1.2 08/06

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

For Customer Service or Warranty Information Call Toll Free

888-304-6125

WILDVIEW

P.O. Box 535189

Grand Prairie, TX 75053-5189

www.wildviewcam.com

Wildview Scouting Camera Limited Warranty

Your Wildview Scouting Camera is covered by a One Year Limited

Warranty on parts & labor from the date of purchase. The warranty

covers defects in workmanship & materials. The warranty does not

apply to units, which have been damaged or abused intentionally or

unintentionally. Tampering with or altering the unit will void the warranty.

Any unauthorized service will void warranty. Original sales receipt must

be produced for any warranty service. Questions call 888-304-6125.

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

Manual Contents

Camera overview 4

Camera kit contents 7

Battery and memory Installation 8

Set up & Using the camera 10

Mounting the camera 11

Viewing images 15

Saving and Deleting images 18

Memory compatibility chart 20

Technical Specs 21

General Information 23

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

Camera overview

Front view Side view

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

Open view image with major parts indication

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

Picture / Image Capacity

SD card VGA

300K Pixel

QVGA

76K Pixel

16MB 130 530

32MB 260 1060

64MB 520 2,120

128MB 1,040 4,240

256MB 2,080 8,480

512MB 4,160 16,960

NOTE: Picture / Image Capacity Chart provides approximate number of

images or AVI movies based on resolution setting and the size of

memory card. These figures may vary depending on the amount of

detail in the image.

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

Camera kit contents

• Model STC-TGL1 VGA Digital Scouting Camera

• CDROM (Contains camera driver only)

• User Manual.

• 1.5M USB cable.

• Strap.

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

Battery & memory installation

The Wildview STC-TGL1 VGA Digital Scouting Camera is designed

to operate using alkaline batteries.

NOTE: Always have camera in OFF position when installing or

removing batteries.

Batteries “C” cell

The internal battery compartment accepts 4 “C” cell batteries. Be

sure to use high quality brand name alkaline batteries. Install

batteries in correct polarity (+/-) as noted inside battery

compartment.

Memory Options

Your Wildview scouting camera is equipped with 8MB built in

SDRAM memory. The camera is also equipped with an

expandable media card slot capable accepting up to 512MB SD

card (sold separately). With no memory card inserted into the slot,

the camera will use the built in 8MB SDRAM memory. If a SD

card is inserted into the slot then the camera will bypass the built

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

in memory and utilize the SD memory. The front counter display

will show the number of images on the built in memory unless the

expansion card is inserted at which point the counter will only

show the number of images in the expansion card.

Inserting SD card

Make sure camera is in the OFF position whenever adding or

removing memory.

• Insert SD memory card in to the SD card slot completely and in

the correct direction as shown on the inside of the housing.

• To remove the SD memory card, depress the SD card and pull

out the card gently.

 SD cards must be clean (no images from other sources.)

STC-TGL1

www.wildviewcam.com Toll Free 888-304-6125

Set up

• Time out: To set the amount of preset time in minutes the

camera will sleep between PIR triggering.

• Resolution: The resolution selection that you have selected.

o High (VGA): Select this option to capture a VGA image

quality.

o Low (QVGA): Select this option to capture a QVGA image

quality.

Using the camera

Select the time out and resolution setting before you turn on the

camera.

1. Select the time out interval by sliding the time out toggle switch to

the desire preset time interval in minutes. 1 / 5 / 10 / 20 minutes.

2. Select the resolution setting by sliding the resolution toggle switch

to the desire resolution setting. Hi / Lo resolution.

Once the program setting has been completed your Wildview scouting

camera is ready for field use.

Indice

Altri manuali Wildview Telecamera da ricognizione

Wildview

Wildview STC-WV40NG Manuale utente

Wildview

Wildview Infrared Xtreme STC-TGL2IR Manuale utente

Wildview

Wildview STC-TGLBC2 Manuale utente

Wildview

Wildview TGLX8IR Series Manuale utente

Wildview

Wildview Xtreme 3 Manuale utente

Wildview

Wildview Infrared Xtreme STC-TGL5IR Manuale utente

Wildview

Wildview Wildview STC-TGL2M Manuale utente

Wildview

Wildview TGLX8IR Series Manuale utente

Wildview

Wildview TGLX5IR Series Manuale utente

Wildview

Wildview InfraredXtreme STC-TGLX35IR Manuale utente

Wildview

Wildview TGLX2IR Series Manuale utente

Manuali Telecamera da ricognizione popolari di altre marche

Nestbox

Nestbox C13 Manuale utente

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manuale utente

Suntek

Suntek HC-800M Manuale utente

Spypoint

Spypoint G4 Manuale utente

Duramaxx

Duramaxx 10029765 Manuale utente

Brecom

Brecom C2400 Manuale utente

BlazeVideo

BlazeVideo A280W Manuale utente

Bestok

Bestok 5210GM Manuale utente

GardePro

GardePro X60P Manuale utente

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manuale utente

PNI

PNI HUNTING 280C Manuale utente

Muddy

Muddy Pro-Cam 14 Manuale utente

Bresser

Bresser 3310006 Manuale utente

Recon Outdoors

Recon Outdoors HS410 Manuale utente

Braun

Braun 57660 Manuale utente

Wildgame

Wildgame Shadow Manuale utente

Spypoint

Spypoint FLEX Manuale utente

Hieha

Hieha WiFi900Pro Istruzioni per il montaggio