Wilson Electronics Weboost Office 200 Manuale utente

Installation Guide

Cell Signal Booster

A WILSON ELECTRONICS BRAND

NEED HELP? https://www.signalbooster.com 855.846.2654

Package Contents 1

Preparation 3

STEP 1: Inside Antenna & Booster Placement 5

STEP 2: Mount Outside Antenna 6

STEP 3: Route & Connect Outside Antenna To Booster 7

STEP 4: Route & Connect Inside Antenna To Booster 8

STEP 5: Power Up The Booster 9

Measuring Booster Performance 10

Menu System 12

Troubleshooting 16

Safety Guidelines 17

Speciﬁcations 19

Warranty 20

______

Index

OFFICE 200 CELL PHONE SIGNAL BOOSTER

______

Package

Contents

Office 200

Booster

Office 200

Booster

Power

Supply

(850026)

Power

Supply

(850026)

Lightning Surge

Protector

(859902)

Lightning Surge

Protector

(859992)

Cable Mounting

Clips

Cable Mounting

Clips

Inside

Antenna

(314407)

Inside

Antenna &

Connector

(314407)

Outside

Antenna

(314422)

Outside

Antenna

(314423)

75’ & 60’

Wilson 400 Cables

(952360 & 952375)

75’ & 60’

RG-11 Cables

(951160 & 951175)

2’ Wilson 400

Cable

(952302)

2’ RG-11

Cable

(951127)

2CELL PHONE SIGNAL BOOSTER OFFICE 200

______

Key Features

Extended Dynamic Range (XDR) for continuous

connectivity:

any incoming signal and never shuts down due to a

strong outside signal.

Simple Wall-Mount Installation: An indoor and outdoor

port are located on top of the ampliﬁer for easy antenna

connections, while an exposed mounting ﬂange at each

corner of the ampliﬁer provides for simple and clean wall-

mount installation.

Onboard Software for Better Control: The ampliﬁer is

automatically controlled with automatic onboard software,

ensuring great connectivity throughout large spaces and

multi-story buildings. The ampliﬁer will adjust its gain

level up or down as required by the conditions of the

immediate signal environment.

Color LCD Touch Screen:

LCD touch screen for assessing ampliﬁer performance,

making adjustments to the outside antenna, and turning

OFFICE 200 CELL PHONE SIGNAL BOOSTER

______

Preparation

You Will Need (tools not included)

Make sure the following materials are prepared and ready for your installation.

Ladder

Drill

1” - 2” diameter existing pole for mounting

Outside Antenna (#901117 Pole Mount can be

purchased separately if needed)

Recommended: Power Strip with surge protection

1 to 2 hours

4CELL PHONE SIGNAL BOOSTER OFFICE 200

______

Installation Diagram

Outside

Antenna

Booster

75’ Coax Cable

Troubleshooting section recommends increasing distance

further if needed.

60’ Coax Cable

to power

Lightning Surge

Protector

Inside

Antenna

60 FEET HORIZONTAL OR 25 FEET VERTICAL DISTANCE

OFFICE 200 CELL PHONE SIGNAL BOOSTER

AT LEAST 24” APART

Plastic Nut

Tab Ring

ceiling mount

drywall

NOTE: Do not connect booster to power until the system is fully installed.

______

Step 1: Inside Antenna &

Booster Placement

Place the inside antenna in the ceiling over where you need the greatest signal

boost and place booster in your desired location at least 24” away from

inside antenna.

6CELL PHONE SIGNAL BOOSTER OFFICE 200

______

Step 2: Mount Outside Antenna

NOTE: Mounting on existing roof exhaust pipe would be a good time-saver option. Watch

out for power lines.

Pole mounting and wall mounting options are included.

Attach the mount to the outside antenna and use the bracket clamp to attach

the antenna to a pole or exhaust pipe.

Outside

Antenna

U-Bolt

L-Bracket

existing

pole

Pole

Bracket

OFFICE 200 CELL PHONE SIGNAL BOOSTER

______

Step 3: Route & Connect

Outside Antenna To Booster

Route cable to the and connect to the port labeled

‘OUTSIDE ANTENNA’.

Outside

Antenna

75’ Coax Cable 2’ Coax Cable

Outside

Antenna

Lightning Surge

Protector

Booster

Cable Mounting Clips

provided

Lightning Surge

Protector

Connect 2 ft. coax cable to outside antenna, attach the lightning surge

protector, then connect the black 75 ft. coax cable and route into building.

8CELL PHONE SIGNAL BOOSTER OFFICE 200

______

Step 4: Route & Connect

Inside Antenna To Booster

Inside

Antenna

60’ Coax Cable

Booster

Connect the black 60 ft. coax cable to inside antenna and route to the

200 booster and connect to the port labeled ‘INSIDE ANTENNA’.

Outside

Antenna

Booster

Cable Mounting Clips

provided

Inside

Antenna

Indice

Altri manuali Wilson Electronics Estensione

Wilson Electronics

Wilson Electronics DB Pro 462105 Manuale utente

Wilson Electronics

Wilson Electronics Signal 4G SmarTech III Manuale utente

Wilson Electronics

Wilson Electronics WilsonPro Single Room Manuale utente

Wilson Electronics

Wilson Electronics weBoost Drive Reach RV Guida all'installazione

Wilson Electronics

Wilson Electronics AG Pro 70 Manuale utente

Wilson Electronics

Wilson Electronics weboost Office 100 Manuale utente

Wilson Electronics

Wilson Electronics Sleek 4G Manuale utente

Wilson Electronics

Wilson Electronics SIGNALBOOST 811210 Manuale utente

Wilson Electronics

Wilson Electronics weboost Office 100 Manuale utente

Wilson Electronics

Wilson Electronics Signal 4G 460019 Manuale utente

Wilson Electronics

Wilson Electronics PRO 70 PLUS SELECT Manuale utente

Wilson Electronics

Wilson Electronics WilsonPro A1000 Manuale utente

Wilson Electronics

Wilson Electronics Sleek Manuale utente

Wilson Electronics

Wilson Electronics 271265 Manuale utente

Wilson Electronics

Wilson Electronics SLEEK 2B5225 Manuale utente

Wilson Electronics

Wilson Electronics 460102 Manuale utente

Wilson Electronics

Wilson Electronics PRO 1100 Manuale utente

Wilson Electronics

Wilson Electronics weBoost Drive Reach RV Manuale utente

Wilson Electronics

Wilson Electronics IoT 5-Band Manuale utente

Wilson Electronics

Wilson Electronics Sleek 4G Manuale utente

Wilson Electronics

Wilson Electronics WilsonPro A500 Manuale utente

Wilson Electronics

Wilson Electronics 277280 Manuale utente

Wilson Electronics

Wilson Electronics WEBOOST DRIVE X OTR Manuale utente

Wilson Electronics

Wilson Electronics weboost DRIVE REACH Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

Wilson Electronics weboost Office 200 Manuale utente

Manuali Estensione popolari di altre marche