WILSON PRO IoT 2-Band Manuale utente
IoT 2-Band
Direct-Connect Cell Signal Amplifier
ENGLISH FRANÇAIS
Installation Guide
A Wilson Electronics Brand
BU-GDE000208-FR-001-01-03-19.indd 1BU-GDE000208-FR-001-01-03-19.indd 1 1/7/2020 9:49:33 AM1/7/2020 9:49:33 AM
Index
Package Contents ........................................................... 2
IoT Retail Application Example..................................................3
STEP 1 Outside Antenna Placement .........................................3
STEP 2 Amplifier Placement ...............................................3
STEP 3 Route & Connect Antenna to Amplifier ............................... 4
STEP 4 Connect Device to Device.......................................... 4
STEP 5 Power Up the Amplifier ............................................ 5
Safety Guidelines ............................................................7
Antenna Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications ............................................................... 9
Warranty ...................................................................10
BU-GDE000208-FR-001-01-03-19.indd 2BU-GDE000208-FR-001-01-03-19.indd 2 1/7/2020 9:49:33 AM1/7/2020 9:49:33 AM
1
ENGLISH
IoT 2-Band
Direct-Connect Cell Signal Amplifier
The WilsonPro IoT 2-Band is a “Direct-Connect” solution for amplifying cellular
network capable equipment and devices, including vending machines, ATMs,
security panels, and cellular “hotspots” that have a SMA type of connector. The IoT
2-Band is “carrier agnostic”, supports all major North American cell carriers and
complys to ISED RSS-131 radio standards specification.
The IoT 2-band is available in three dierent kit options: 460209: basic kit with
traditional AC-to-DC power supply and small 4 in. magnetic mount antenna, 460109:
with longer 12” antenna, and 460309: with “hard-wired” DC power supply.
BU-GDE000208-FR-001-01-03-19.indd 1BU-GDE000208-FR-001-01-03-19.indd 1 1/7/2020 9:49:33 AM1/7/2020 9:49:33 AM
2
ENGLISH
Package Contents
IoT 2-Band
Signal Booster
& Bracket
(460009)
Kit Options (IoT 2-Band Signal Booster included)
IoT 2-Band 12” Antenna Kit
460109
■ 6 ft. RG174
■ AC-to-DC Power Supply
w/Mini USB Connector
■ 12 in. Mag Antenna
IoT 2-Band Kit
460209
■ 6 ft. RG174
■ AC-to-DC Power Supply
w/Mini USB Connector
■ 4 in. Mini Mag Antenna
IoT 2-Band DC Hardwire Kit
460309
■ 6 ft. RG174
■ 12V DC Hardwired
Power Supply
■ 4 in. Mini Mag Antenna
Any Kit Option
Below
+
BU-GDE000208-FR-001-01-03-19.indd 2BU-GDE000208-FR-001-01-03-19.indd 2 1/7/2020 9:49:33 AM1/7/2020 9:49:33 AM
3
ENGLISH
STEP 1 Outside Antenna
Placement
Select a location to install the Signal
Amplifier that is away from excessive
heat, direct sunlight, moisture and that
has proper ventilation.
STEP 2 Amplifier Placement
Mount the Outside Antenna on top
of a metal structure that is free of
obstructions and 12 in. away from any
other antennas.
Outside Antenna
2-Band
Amplifier
IoT Retail Application Example
BU-GDE000208-FR-001-01-03-19.indd 3BU-GDE000208-FR-001-01-03-19.indd 3 1/7/2020 9:49:34 AM1/7/2020 9:49:34 AM
4
ENGLISH
Run the Outside Antenna Cable to the
Signal Amplifier and attach it to the
connector labeled Outside Antenna.
Finger tighten only.
Connect the provided cable to
the cellular device (adapter may
be needed) then to the connector
labeled Data Device on the Signal
Amplifier. Finger tighten only.
STEP 3 Route & Connect
Antenna to Amplifier
STEP 4 Connect Device
to Amplifier
Outside Antenna
IoT 2-Band
Amplifier
IoT 2-Band
Amplifier
Data
Device
BU-GDE000208-FR-001-01-03-19.indd 4BU-GDE000208-FR-001-01-03-19.indd 4 1/7/2020 9:49:34 AM1/7/2020 9:49:34 AM
5
ENGLISH
If Mounting Plate is needed,
remove the 2 screws on back of
Booster and secure Mounting
Plate with the screws as shown.
Then mount to surface.
STEP 5 Power Up
the Amplifier
Plug the Power Supply into wall
outlet (or connect to hardwired
12V DC source if kit 460309 is
used) then connect to end of
Amplifer labeled “ ”.
Mounting Plate
IoT 2-Band
Amplifier
IoT 2-Band
Amplifier
Data
Device
Power Supply
BU-GDE000208-FR-001-01-03-19.indd 5BU-GDE000208-FR-001-01-03-19.indd 5 1/7/2020 9:49:35 AM1/7/2020 9:49:35 AM
6
ENGLISH
Diagram
Cellular Modem
IoT 2-Band Amplifier
Power Supply
Surge Protector
Outside Antenna
BU-GDE000208-FR-001-01-03-19.indd 6BU-GDE000208-FR-001-01-03-19.indd 6 1/7/2020 9:49:35 AM1/7/2020 9:49:35 AM
7
ENGLISH
Safety Guidelines
Verify that both the Outside Antenna and the adapter extension cable are connected to the Signal Booster
before powering up the Signal Amplifier.
Use only the power supply provided in this package. Use of a non-Wilson Electronics products may damage
your equipment.
RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.
AWS Warning: The Outside Antenna must be installed no higher than 10 meters (31’9”) above ground
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless
providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are
unsure, contact your provider.
In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at
least 20 cm (8 inches) from (i.e., MUST NOT be installed within 20 cm of) any person.
You MUST cease operating this device immediately if requested by the FCC (or ISED in Canada) or licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
This device may be operated ONLY in a fixed location (i.e..may operate in a fixed location only) for in-building use.
FOR MORE INFORMATION ON REQUIREMENTS SET OUT IN ISED CPC-2-1-05, SEE BELOW:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html
BU-GDE000208-FR-001-01-03-19.indd 7BU-GDE000208-FR-001-01-03-19.indd 7 1/7/2020 9:49:35 AM1/7/2020 9:49:35 AM
8
ENGLISH
Antenna Info
Outside antenna maximum permissible antenna gain (dBi) 50Ω 4.90 6.12
BAND 25/2
BAND 5
This radio transmitter 4726A-460009 has been approved by Innovation, Science and Economic Development
Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna
types not included in this list that have a gain greater than the maximum gain indicated for any type listed are
strictly prohibited for use with this device.
ΩAntenna TypeCoax Type# Ln(ft)
504 in. Mini-MagLMR-100301126 10
OUTSIDE ANTENNA INFO
5012 in. Magnet MountRG-174311125 12.5
BU-GDE000208-FR-001-01-03-19.indd 8BU-GDE000208-FR-001-01-03-19.indd 8 1/7/2020 9:49:35 AM1/7/2020 9:49:35 AM
Indice
Lingue:
Altri manuali WILSON PRO Amplificatore
