Win Accord PTT-9726D Manuale utente
- 1 -
winaccord
Personal Touch Tablet
Preliminary Spec
2012-08-21
- 2 -
Table of content
Ⅰ- GETTING STARTED
Important Safety Precautions 3
Cleaning the Panel 3
Cleaning the Personal Touch Tablet 3
Introduction 4
Buttons Overview 5
Accessories 5
What’s in the Box 6
Charging the Battery 6
Power On/Off and Unlock Personal Touch Tablet 6
Ⅱ-FUNCTIONING OFTHE TABLET
Navigation 7
Home Screen 7
Application Launcher Screen 7
Status Bar 8
Onscreen Keyboard 9
Ⅲ- SETTINGS
Set Up Wi-Fi Connection 10
SetDateandTime 11
Set Up Email 12
Set Up Calendar 13
Widgets 14
Change Wallpapers 14
Use folders 14
Install Third-Part Applications from micro SD 15
Ⅳ- CONNECTIONS
Browser 16
Wi-Fi 17
Bluetooth 17
PCConnection 18
Connect to TV set (optional) 19
Ⅴ- APPLICATIONS
Camera 20
Clock 21
Calculator 22
Downloads 23
Gallery 24
Music 25
MoviePlayer 26
File Browser 27
Ⅵ-PRODUCT SPECIFICATION 28
ⅦFCC Statement 29
- 3 -
Ⅰ- GETTING STARTED
Important Safety Precautions
Always follow these basic safety precautions when using your Personal Touch Tablet.
This will reduce the risk of fire, electric shock and injury.
Warning: To reduce the risk of fire of shock hazard, do not expose this product to rain
or water.
Warning: To prevent the risk of electric shock, do not remove the cover. There are no
user-serviceable parts inside. Opening will void your warranty.
●Unplug the Personal Touch Tablet before performing maintenance.
●Keep your Personal Touch Tablet out of direct sunlight and heat sources.
●Protect the power cord. Route power cords so that they are not likely to be walked on
or pinched by items placed on or against them. Pay particular attention to the point
where the power cord is attached to the Personal Touch Tablet.
●Only use the AC adapter included with the Personal Touch Tablet. Using any other
power adapter will void your warranty.
●Unplug the power cord from the outlet when the unit is not in charging condition.
Cleaning the Panel
Treat the screen gently. The screen is made of glass and can be scratched or broken.
To clean fingerprints or dust from the screen, it is recommended to use a soft,
non-abrasive cloth such as a camera lens cloth to clean the screen.
If you use a commercial Cleaning Kit, do not apply the cleaning liquid directly to the
screen. Clean the screen with cleaning cloth moistened with the liquid.
Cleaning the Personal Touch Tablet
Clean the outer surface of the Personal Touch Tablet (excluding the screen) with a soft
cloth dampened with water.
- 4 -
Introduction
Welcome to the Personal Touch Tablet! The Personal Touch Tablet includes these key
features:
●Displays Alarm, AppInstaller, Browser, Calculator, Calendar, Camera, Clock, Email,
File Browser, Gallery, HDMI Switch, Music, Setting, Video Player and etc
●Displays digital photos, Play Music and Video
●Wi-Fi function to connect with your AP router for internet browsing
●Micro Secure Digital™ (micro SD) slot for external storage
●Capacitive touch screen for all user operations
●4GB Internal Memory
●USB2.0 OTG for connection to the PC or USB flash drive
- 5 -
Buttons Overview
Accessories
Power Adapter (depending on the regional requirement, the plug may look different)
- 6 -
USB Cable
What’s in the Box
Personal Touch Tablet
AC Power Adapter (5V/2A)
USB Cable
Quick Start Guide
Charging the Battery
Plug the AC power adapter into the Personal Touch Tablet and into a wall outlet.
Icon will turn to icon while the battery is charging.
When charging is completed, the battery icon will turn into a steady blue.
* It is strongly recommended you fully charge the device for about 4-6 hours before use.
*When charging battery, the better indicator for a fully charged battery is a steady blue
battery icon on the notification bar. icon means the battery is still being charged,
even when 100% has been displayed for battery level on the Settings →About tablet→
Status screen.
Power on/off and Unlock Personal Touch Tablet
The Personal Touch Tablet is easy to set up. Just follow these steps:
1. To power on: Press and hold Power button for 2 seconds.
2. To unlock: Wait until a screen with a lock icon shows up, gently tap the “Lock” icon
and slide it toward the unlock icon.
3. To power off: Press and hold the Power button for 2 seconds until “Power off”
window pops up on screen where you can choose OK option to power off the device.
4. To reset：Press the power button for 6 to 8 seconds.
Note: The screen with the lock icon will time out in 10 seconds if you do not unlock it.
In case it happens, the Power button can be pressed briefly to make it show up
again.
- 7 -
Ⅱ- FUNCTIONING OFTHE TABLET
Navigation
Tablet has five home screens by default. The first time you turn on the tablet or after
having factory data reset, you will see a navigation screen.
* To see all you applications, touch inside the circle.
* You can put your favorite applications on Home screen.
Home Screen
A typical Home screen with wallpaper, status bar, and few applications on the screen.
* The background wallpaper may be different from model to model
◆A shortcut to Google search
◆A shortcut to application Launcher screen.
Application Launcher Screen
A typical application Launcher screen is shown below. One icon represents one
application which can be run by tapping on the icon.
- 8 -
*The screen icon may be different from model to model
Status Bar
At the bottom of the screen, the status bar mainly indicates Back icon, Home icon,
Recent viewed applications icon, Current time, Wi-Fi status, Bluetooth status and
battery level, etc.
Icon Action
/ On any functional screen, tap this icon to go back one screen or
exit application.
On any functional screen, tap this icon to go to Home screen
Shows a list of thumbnail images of applications you’ve work
with recently. To open an application, touch it. To remove a
thumbnail from the list, swipe it left or right.
Current time
Wi-Fi connection and signal strength
Shows Bluetooth status
Battery level. Will turn orange when battery is low and turn red
when battery is very low.
Onscreen Keyboard
The onscreen keyboard appears automatically anytime you tap on a text line for input.
While entering text with the onscreen keyboard, each character will be entered into the
- 9 -
position pointed by a vertical cursor. You can change the cursor position by tapping
with your finger on the position you want to enter the next character. To select different
language keyboard, touch and hold icon .A pop menu will show up to let you select
the “Input Options”
*Setting up an International keyboard: see “Install Third-Part Applications from micro
SD” section.
- 10 -
Ⅲ- SETTINGS
Set Up Wi-Fi Connection
Make Wi-Fi Connection in Settings ÆWireless & networks ÆWi-Fi, slide
the Wi-Fi switch to the ON position.
Normally, the device will automatically scan the available Wi-Fi Access Point (AP). If
this does not happen, select icon Scan (upper right corner) to scan for the available
Wi-Fi APs. Then, tap on the desiredAP to make the connection. If it is a secured AP,
system will prompt you for the password. Enter it by tapping on the password entry
line, and use the onscreen keyboard to enter the password. Then, tap on the Connect to
start connecting to that AP.
When connection is established, the Wi-Fi connected icon will show up on the
status bar.
Set Date and Time
Use Settings ÆDate & Time to open up the date/time setting screen as
shown below. Select the correct time zone. If the Wi-Fi is connected to Internet, check
on the Automatic date & time to have time set up automatically. If Wi-Fi is not
connected to Internet, uncheck Automatic date & time to temporarily set date and
time. Then, check Automatic again before leaving the screen. In the future, when the
Wi-Fi is connected to internet, date and time will be automatically adjusted.
Indice
Altri manuali Win Accord Tavoletta
