Winchester PONY 19 Manuale utente
OWNER’S MANUAL
PONY 19 PONY 42
PONY®SERIES
OWNER’S MANUAL PAGE 2
winchestersafes.com PONY SERIES
NOTES:
VISIT WINCHESTERSAFES.COM FOR 24/7 CUSTOMER SERVICE
CUSTOMER SERVICE DEPARTMENT
HOURS: 7:00am - 5:00pm Central Time
PHONE: 877-948-6723 (877-9GUNSAFE)
WINCHESTER SAFES
4801 Esco Drive
Fort Worth, Texas 76140
OWNER’S MANUAL PAGE 3
winchestersafes.com PONY SERIES
TABLE OF CONTENTS
Outside of Pony ....................................................4
Inside of Pony .....................................................5
Pony Specications & Diagram .......................................6
Delivery and Installation ............................................7
Mechanical Lock Operating Instructions ...............................9
Mechanical Lock Dialing Instructions .................................10
Electronic Lock Operating & Changing Instructions .....................11
Care and Use .....................................................14
Lost Combination .................................................15
Frenquently Asked Questions .......................................15
Warranty Claims and Repairs........................................16
Warranty ........................................................17
Accessories.....................................................Back
OWNER’S MANUAL PAGE 4
winchestersafes.com PONY SERIES
Congratulations on your purchase of a new Pony Series personal security safe built
in Fort Worth, Texas by Winchester Safes. Your new safe will provide you with many
years of trouble-free protection of your valuables with very little service on your part.
OUTSIDE VIEW
Serial and Model Number Tags
(Top, back right corner)
Upper Hinge
Upper and Lower Hinge Adjustment Access
(Use 3/16”Allen Wrench - not included)
Combination
Lock (shown) or
Electronic Lock
Single Lever
Handle (shown) or
3-Spoke Handle
Lower Hinge
OWNER’S MANUAL PAGE 5
winchestersafes.com PONY SERIES
Serial and Model Number Tags
(Top, back right corner)
INSIDE VIEW: PONY 19
Key Features Label
Serial Number
Model Number
Movable 1”Dia.
Locking Bolts (5)
Stationary 1”Dia.
Locking Bolts (5)
Anchor Hole Access Cover
Palusol®
Heat Expandable
Door Seal
24-Gun Rack
Top Shelf (Fixed)
Serial and Model Number Tags
(Top, back right corner)
INSIDE VIEW: PONY 42
Key Features Label
Serial Number
Model Number
Movable 1”Dia.
Locking Bolts (5)
Stationary 1”Dia.
Locking Bolts (5)
Anchor Hole Access Cover
Palusol®
Heat Expandable
Door Seal
45-Gun Rack
Top Shelf (Fixed)
OWNER’S MANUAL PAGE 6
winchestersafes.com PONY SERIES
SPECIFICATIONS: PONY 19
SPECIFICATIONS: PONY 42
OWNER’S MANUAL PAGE 7
winchestersafes.com PONY SERIES
DELIVERY AND INSTALLATION
A. If you purchased your safe from a retailer and are having it delivered and
installed, the delivery company personnel will provide you with the proper instruction
for the correct operation of your safe. Pay very close attention to the operation of the lock.
Make sure you can comfortably operate the lock before they leave your home or oce.
After they have shown you how to operate the lock, you should lock and unlock the safe
several times without any assistance from them. Once you are comfortable with this
procedure, and can do it consistently, you are now ready to operate your safe.
Your new safe left the factory in new condition and without damage. Inspect your new
safe for any damage prior to the delivery people leaving. Any damage claims at time of
delivery must be resolved with the delivery company and/or your retailer. Please do not
contact the factory.
B. If you purchased your safe and are doing your own delivery and installation,
you must read and follow these instructions. Safes are heavy and cumbersome and
there are risks associated with the untrained consumer doing their own delivery and
installation.We recommend that you use a professional safe installer, who is insured, and
will have the necessary equipment and training to safely and properly install your safe.
1. Packaging should have been removed and safe inspected for damage prior to
accepting the safe from your retailer. If your safe is damaged at this point, please contact
your retailer. Do not contact the factory.
2.Verify that the Serial Numbers on the safe are the same as the one in this manual.
Serial Numbers are located on top of the safe, in the back right corner and also on the
upper part of the inside door, near the locking bolts. In the unlikely event that all three
serial numbers do not match exactly, please contact theWinchester Safes Customer
Service Department.
OWNER’S MANUAL PAGE 8
winchestersafes.com PONY SERIES
DELIVERY AND INSTALLATION (CONTINUED)
3.Your safe was shipped with the door closed and locked. Open the safe by following the
MECHANICAL LOCK OPERATING INSTRUCTIONS found on page 10 of this manual, or the
ELECTRONIC LOCK OPERATING INSTRUCTIONS found on page 11 of this manual.
4. Remove the safe from the pallet by rst opening safe the door. Find and remove the (4)
four decorative plugs in the safe bottom. Using a 9/16 inch socket and ratchet, remove the
four lag bolts that secure the safe to the pallet. Reinstall the four decorative plugs. Next,
close the safe door and extend the locking bolts by rotating the handle counterclockwise
(turn right).The Pony 19 weighs approximately 435 pounds, and the Pony 42 weighs
approximately 725 pounds.With the assistance of one or more adults, slide the safe to
one side of the pallet to prevent it from tipping over. Tilt the safe over until the bottom
side of the safe touches the oor, and then tilt the safe over enough to allow the pallet to
be removed from under the safe.Tilt the safe back up and set at on the oor.
5. With a dolly, substantial enough to support the size and weight of your safe; move the
safe to your desired location. Consideration should be given to the weight of the safe and
the type of ooring that the safe will be moved across.Wood, tile, carpet and other types
of ooring can be easily damaged and it is your responsibility to take whatever measures
necessary to prevent any damage. If your home is pier and beam construction, you should
place the safe in an area of the oor that you are sure will support the safe’s weight.
To maximize the re protection of your safe, we recommend you place it in the lowest
elevation in your home. In a home re, the coolest part of the re is in the basement area
and the hottest in the upstairs.
6.To maximize the burglary protection, and prevent the safe from toppling over, you
should anchor your safe to the oor.
7.Your new Pony safe is now ready to use.
OWNER’S MANUAL PAGE 9
winchestersafes.com PONY SERIES
MECHANICAL LOCK OPERATING INSTRUCTIONS
The lock on your safe is a Sargent and Greenleaf (S&G), Group 2, Mechanical Combination
Lock, with a front reading dial and dial ring.The S&G mechanical lock is the nest, most
trusted and reliable lock being used in the industry today.They are precisely made, and the
brass construction of the lock tumblers, which does not require lubrication of any kind, will
provide you with many years of reliable functionality with little or no service. However, the
dialing instructions must be performed exactly or the lock will not open. A deviation of as
little as a half number o the combination will be enough to not allow the lock to open.
Practice the dialing of your combination several times when you rst get your safe and you
will avoid a lot of unnecessary frustration.
Before we start, there are a couple Do’s and Don’ts:
Do’s:
1. Always dial the combination on the index mark at 12 o’clock on the dial ring.The index
mark at 11 o’clock is for service only and is never used by the user of the safe.
2. Turn your dial slowly and use nger-tip pressure only.
3. Do not pass your number in the dialing sequence, even by the slightest amount. If you do,
the lock will not open, you must start over and redial your combination.
4. Have ample light on your dial for good visibility, and stand directly in front of your dial
when running the combination. Do not stand to the side of the dial.The parallax view
could be enough for you to go over or under your number and the lock will not open.
5. Store this manual with your combination in a secure place other than inside
your safe.
Don’ts:
1. Do not spin the dial in a rapid motion or turn it back and forth. It could damage the lock to
the point that it will not open and you will be locked out of your safe.
2. Never use lubricant of any kind.
3. Do not go past any of the numbers in your combination and continue dialing.
The lock will not unlock. Start from the beginning and redial the entire combination
4. Do not store this manual and your combination inside your safe.
OWNER’S MANUAL PAGE 10
winchestersafes.com PONY SERIES
MECHANICAL LOCK DIALING INSTRUCTIONS
Record your combination from above, in the spaces below for each step.
SERIAL NUMBER: _______________________________________
COMBINATION: ________________________________________
STEP 1:
Turn the dial
counterclockwise
(left) at least 3
revolutions and
stop when the
rst number
comes to the
index mark.
1st# _______
STEP 2:
Turn the dial
clockwise (right)
passing the
second number
twice and stop
when it comes to
the index mark
the third time.
2nd# _______
STEP 3:
Turn the dial
counterclockwise
(left) passing the
third number
once and stop
when it comes to
the index mark
the second time.
3rd# _______
STEP 4:
Turn the dial
clockwise (right)
until you feel
the dial tighten
slightly. Using
ngertip pressure
only, continue
turning the dial
until it stops. The
lock is now open.
Rotate the safe
handle clockwise
(turn left) and
retract the bolt
work and open
the door.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Winchester Sicuro
Manuali Sicuro popolari di altre marche
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuale utente
Hornady
Hornady SnapSafe Trunk Safe II Manuale utente
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuale utente
Honeywell
Honeywell 5912 Manuale utente
Phoenix
Phoenix FS1280F Manuale utente
Phoenix
Phoenix SS0992K Scheda informativa del prodotto
