Winland EAPro Manuale utente

Page ii

Winland Electronics, Inc.

Limitations of the Alarm System or Device.

While your alarm system or device is reliable and sophisticated, it does not o󰀨er guaranteed

protection against burglary, re or other emergency. Any security product, whether commer-

cial or residential, is subject to compromise or failure-to-warn for a variety of reasons. These

include:

• Individuals may gain access through unprotected openings or have the technical

sophistication to bypass an alarm sensor or disconnect an alarm warning device.

• Monitoring devices will not operate without power. Devices powered by AC will not

work if their AC power supply is o󰀨 for any reason. If system has battery backup, batteries

that are not maintained can fail to provide the necessary power for devices to function prop-

erly.

• Alarm warning devices such as sirens, bells, and horns may not alert people or

awaken sleepers if they are located on the other side of closed or partly closed doors. If

warning devices are on a di󰀨erent level of the residence from the bedrooms, they are less

likely to awaken or alert people inside the bedrooms.

• Telephone lines needed to transmit alarm signals from a premises to a central

monitoring station may be out of service, and are subject to compromise by sophisticated

means of attack.

• Signals sent by wireless transmitters may be blocked or reected by metal before

they reach the alarm receiver. Even if the signal path has been recently checked during a

weekly test, blockage can occur if a metal object is moved into the path.

• Even if the system responds to the emergency as intended and is a monitored alarm

system, the authorities may not respond appropriately.

• This equipment, like other electrical devices, is subject to component failure.

• The most common cause of an alarm system not functioning properly is due to

inadequate maintenance. Your alarm system should be tested weekly to make sure all de-

tection devices are operating properly. Your control panel and keypads should be tested

as well. Installing an alarm system may make you eligible for lower insurance rates, but an

alarm system is not a substitute for insurance. Homeowners, property owners, and renters

should continue to insure their lives and property.

Page iii

Record of Revisions

REV NO. DATE DESCRIPTION

Original May 2022 Initial Issue

Notice

This document will refer to INSIGHT throughout. INSIGHT is a cloud based platform for remote

viewing and management of the EA800-ip device and the EAPro®. INSIGHT is sold separately

and not required to use the EAPro®Gateway. The EAPro® can be used in standalone mode, or

along with INSIGHT in a connected mode. The EAPro®-Gateway monitors the environmental

conditions detected by connected sensors and provides alarm signals when monitored

conditions at any sensor exceeds the user-programmable set points. Winland INSIGHT provides

complete realtime cloudbased visibility of data from EAPro®-Gateway monitored critical

condition environments. The systems detailed and customized response protocols, data logs,

and extreme exibility, provide the fastest resolution of incidents by making the notication

immediately actionable.

NOTE: As of Firmware 22.11.11, the EAPro-Gateway sends notications to INSIGHT, however

INSIGHT does not send out notications to text/emails as this time.

Page iv

Winland Electronics, Inc.

Page Le Blank

Page v

TABLE OF CONTENTS

Foreword 1

Safety Information 1

General Information 3

Overview 3

How to Use This Manual 4

Symbols On the Product or Manual Labeling 5

Relay Block Diagram 5

EAPro®‑Gateway 6

Home Screen 8

Access Control 11

Connections 12

Conguration Parameters 13

Sensors 14

Sensor Programming and Parameter Descriptions 18

Relay Operation 21

Data Logs 21

Installation 22

Installation Tools and Supplies 22

Power Requirements 22

Mount the Rear Plate 23

Connecting Power 23

Initial Start‑Up Procedure 24

Install Wired Sensors 24

Connect Wired Sensors 24

Install Wireless Sensor 25

Program 27

Main Menu 27

Congure System 27

Add Sensor 28

Add User 29

Set System Time and Date Format 29

Set Date and Time 29

Set Lock Mode 30

Select RF Channel 30

Congure Relays 30

Congure Relay State 30

Set Buzzer Triggers 31

Set Light Triggers 31

Operation 32

Acknowledge Alarm 32

Clear Alarm 32

View Sensor Details 32

View Notication Log 32

View Event Log 32

View Sensor Logs 33

View User Logs 33

View About 33

Page vi

Winland Electronics, Inc.

Clear Notication Logs 33

Clear Sensor Logs 33

Export Logs 34

Data Logs 34

Maintenance 35

Edit Sensor 35

Replace Wireless Transmitter 38

Delete Sensor 38

Pause Sensor 39

Test Sensor 39

Edit User 39

Delete User 40

Congure User Mode 40

Sync Users 40

Save System Conguration 40

Edit Network Wi‑Fi 41

Edit Ethernet Settings 41

Update Firmware 42

Reset to Factory Defaults 43

Reboot System 43

Troubleshooting 44

Winland Technical Support 44

Specications 45

Warranty and Service Information 46

Page vii

LIST OF FIGURES

Figure 1: EAPro®‑Gateway 3

Figure 2: EAPro®‑Gateway Block Diagram 6

Figure 3: EAPro®‑Gateway Front 6

Figure 4: Home Screen Sensor Tile 9

Figure 5: Home Screen Tile Examples 9

Figure 6: Connections 13

Figure 7: Wiring Diagram for 4–20mA Sensor – Aux Power Supply 17

Figure 8: Wiring Diagram for 4–20mA Sensor – External Power Supply 17

Figure 9: Wired Sensor Connection: Temperature Probe, WaterBug®, and Dry Contact 25

Figure 10: Wired Sensor Connection: HA‑III+ 25

Figure 11: Wired Sensor Connection: 4–20mA 25

Figure 12: Wireless Sensor MAC Address and ID Location 26

Figure 13: Main Menu 27

Page viii

Winland Electronics, Inc.

Page Le Blank

Page ix

LIST OF TABLES

Table 1: Symbols on Product or Manual Labeling 5

Table 2: EAPro®‑Gateway Parts: Description 7

Table 3: Icons on Touchscreen 7

Table 4: Home Screen Display 8

Table 5: Home Screen Sensor Tile 9

Table 6: Example of Sensor Status on Home Screen Tiles 9

Table 7: User Access Levels 11

Table 8: Lock Setting 12

Table 9: Connector Functions 13

Table 10: Conguration Parameters 13

Table 11: Wired Temperature Probes 14

Table 12: Wired Humidity Sensor 15

Table 13: Wired Water Sensor 15

Table 14: Dry Contact Sensors 15

Table 15: Wireless Temperature Sensor 16

Table 16: Wireless Humidity Sensor 16

Table 17: Wireless MultiFunction Transmitter 16

Table 18: Voltage Selection Matrix for 4–20mA Sensors 17

Table 19: Sensor Programming Parameter Descriptions 18

Table 20: Relay Operation Conditions 21

Table 21: Troubleshooting 44

Table 22: Specications: EAPro®‑Gateway 45

Table 23: Specications: Sensors 46

Table 24: Specications: Accessories 46

Page x

Winland Electronics, Inc.

Page Le Blank

Altri manuali per EAPro

Indice

Altri manuali Winland Portale

Winland

Winland EAPro Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente