Winnerelec V6 PLUS T20S Manuale utente
USER MANUAL
Model:V6 PLUS_T20S
Bluetooth Headset
Manufacturer:Shenzhen Winnerelec Industrial Co.,LTD
Address:411-416 Room Social security building, Honghua Bei Road Gongming
Street Guangming New District,Shenzhen, China
Table of Contents
Introduction ---------------------------------------------- Page 1
Packet Contents ----------------------------------------Page 2
Install Instructions ---------------------------------------Page 3
Charging ---------------------------------------------------Page 5
General Operation Instructions -----------------------Page 5
FM Operation ---------------------------------------------Page 7
Universal Pairing and Using ----------------------------Page 8
Bluetooth Intercom Talk ---------------------------------Page 9
Technical Specifications --------------------------------Page 16
Certification ----------------------------------------------Page 16
1
1: Introduction
Thank you for choosing the T20s Motorcycle 6 Riders full-duplex stereo Bluetooth wireless
helmet headsets, designed for installing into most open-face, flip-front and full-face style helmets.
With the T20s, you can call hands-free on your Bluetooth mobile phone, listen to music or voice
instructions of GPS navigation, and activate wireless intercom for rider to rider or rider to
passenger intercom talk within range of 1200 meters(depending on terrain conditions).
The T20s is compliant with Bluetooth Specification V3.0 supporting the following profiles:
Headset Profile(HSP), Hands-Free Profile(HFP), and Advanced Audio Distribution Profile
(A2DP), and Audio Video Remote Control Profile(AVRCP) and Audio Gateway (AG). It
supports universal pairing with most Bluetooth headsets on the market. The user can activate Siri
or S-Voice from the main unit for voice dialing and other voice commands. The FM radio tuner is
built into the main unit and allows for station scanning.
Superior audio fidelity has been achieved with our high fidelity, non-ported, and ultra-slim helmet
HD speakers. This headset also provides the industry’s best combination of wind and ambient
noise reduction with the miniature boom microphone.
Please read this User Manual carefully before using this product.
2
2: Packet Content
HIFI Speaker and Microphone
3
Clip Mounting Bracket
User Manual
3: Fixed installation method
1:Locate the helmet at the left and clean it up
2:Peel off the 3M rubber protective film
3:Apply pressure to the metal carrier to secure the holder firmly
Note: it takes 24 hours after drying.
Temporary installation method
1:Clip on the left edge of the helmet
2:Remove metal handle after installation
3:If required, use additional anti slip rubber patches
4
Install host
1:Slide host off the top of the clip and you'll hear a click when it is completely plugged in
2:Plug in the 3.5mm headset plug
Headset mounting method
1:Stick the left and right horns of the headphones in the position of the left and right ears of the
helmet
2: Keep the microphone in front of the mouth，Note: microphone holes point to the mouth
V6S PLUS_T20S
5
4: Charging
1. You can charge with the Micro USB cable in the package. During charging, OLED show
“Charging”. After full charging, OLED show “Charged full”, and it is recommended to recharge
the battery before each use. Suggest full charge before each use.
2. Low battery warning：Headset will automatically voice prompt low battery at every 5 minutes
to prompt the user to recharge it.
3. Battery state notify: When standby, double press Power button to report battery level.
5: General Operation Instructions
Power on /Power off
Press Power button for approx. 3S, the screen display “Power on”, and it powers on.
When power on status, press Power button for approx. 1s,the screen display “ Power off”, and it
power off.
Pairing with Cell Phone or GPS and Using
6
Mobile Phone/GPS pairing steps
1. When power off，press Power button for approx 8S, the screen display “Pairing”，Open the
phone Bluetooth, search for “ ”,then click on the phone connection pair.After the pairing,
the screen display “Paired” and goes back to standby mode.
Answer phone calling:
The unit will automatically answer the incoming call after 12 seconds. Or press Phone button to
answer the incoming phone call immediately.
Reject incoming call:
When have incoming calls, double press Power button 2 times to reject within 12s。
End phone calling:
During talking, short press Phone button to end the call。
Voice dial:
When phone standby, double press Volume - button to make voice dialing (The phone itself must
have voice dialing function)
Last number redials:
When cell phone standby, double press Volume + button to make last number redialing.
Memory connects with cell phone:
Once pairing with cell phone, when power on again, headset will re-connect with mobile
automatically. Or in case disconnect during standby mode, short press Phone button will
V6S PLUS_T20S
7
connecting again.
Connect third party calls:
When connecting two cell phones, during phone call with first cell phone and second cell phone
dial in, can double press Phone two times to answer the second cell phone and hold the first cell
phone conversation. When finish the second cell phone conversation, will back to the conversation
with fist cell phone.
Music Control:
Press the Phone button to play and pause the music. When playing music, double press Volume +
button to go to next track, double press Volume - button to go to previous track.
Voice Volume Control:
Short press Volume + button or Volume- button adjust the voice volume. Or while music or talking
state, long press Volume+ button or Volume - button adjust the voice volume.
6: FM RADIO
Turn on/off radio
When in standby mode, press and held Volume+ button or Volume - button 1 seconds to turn on
FM radio. Press and hold it again for 1 seconds to turn off FM radio.
FM Radio Station Search
While in FM mode, double press Volume + button or Volume - button two times to search a
next/previous FM channel.
8
Preset and store up to 6 FM radio stations
In FM radio mode, when a favorite station is found, long press Phone button 1 seconds to save, a
beep tone will sound. Preset and store up 6 FM radio stations. Once 6 stations have been saved,
saving a new station will overwrite the oldest saved station. Press Phone button to rotate between
each saved station.
7: Universal Pairing and Using
Power on other brand Bluetooth device into pairing suitable, meanwhile T20s at standby mode,
long press Intercom B button 1 seconds, and screen display “pairing”, then short press Intercom B,
and screen display “Searching”. After pair successfully, the screen display “Paired”.
After paired, while at standby mode, short press Volume+ and Volume- button at the same
times, reconnect with Bluetooth headset which connected before and start talking.
While in talking mode, short press Phone button to end it.
the
V6 PLUS_T20S
Indice
