WinSystems PPC65B-1x Manuale utente
WinSystems, Inc. | 715 Stadium Drive, Arlington, Texas 76011 | 817-274-7553 | [email protected] | www.winsystems.com
PPC65B-1x
IP65-Compliant Fanless Panel PC
with Touch Screen (Industrial Intel®Atom™E3845)
Product Manual
PPC65B-1x
v1.0 www.winsystems.com Page i
Revision History
Copyright and Trademarks
Copyright 2017, WinSystems, Inc.
No part of this document may be copied or reproduced in any form or by any means
without the prior written consent of WinSystems, Inc. The information in the document
is subject to change without notice. The information furnished by WinSystems, Inc. in
this publication is believed to be accurate and reliable. However, WinSystems, Inc.
makes no warranty, express, statutory, implied or by description, regarding the
information set forth herein or regarding the freedom of the described devices from
patent infringement. WinSystems, Inc. makes no warranty of merchantability or fitness
for any purpose. WinSystems, Inc. assumes no responsibility for any errors that may
appear in this document.
Trademark Acknowledgments
WinSystems is a registered trademark of WinSystems, Inc.
Intel®, the Intel logo, are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other Countries.
Document
Version
Last Updated
Date Brief Description of Change
v1.0 8/2017 Initial release
PPC65B-1x
v1.0 www.winsystems.com Page ii
Table of Contents
1 Before You Begin .........................................1
1.1 Warnings ......................................................................1
2 Introduction.............................................1
3 Functionality ............................................1
4 Features ...............................................2
5 General Operation ........................................4
5.1 Touch Screen Components ........................................................4
5.1.1 Ambient Light Sensor.......................................................4
5.1.2 TFT-LCD Display with Touch .................................................4
5.1.3 Aluminum Front Bezel ......................................................4
5.1.4 Black Overlay .............................................................5
5.2 Touch Screen External Control, Connector, and Indicator Locations .........................5
5.2.1 Power Button .............................................................5
5.2.2 Reset Button..............................................................5
5.2.3 Power LED and HDD LED....................................................6
6 Specifications ...........................................7
6.1 Part Number....................................................................7
6.2 Specifications...................................................................8
7 Setup and Installation......................................9
7.1 Installing the I/O Kit ..............................................................9
7.2 Installing Memory ...............................................................9
7.3 Installing the Hard Drive (HDD/SDD) ................................................10
7.4 Installing CompactFlash and Secure Digital cards ......................................11
7.5 Connecting Power to J16 .........................................................13
7.6 Connecting Components .........................................................13
7.7 Mounting Method...............................................................14
7.7.1 Panel Mount .............................................................14
7.7.2 VESA Mount .............................................................16
7.8 Power Up .....................................................................17
7.9 Installing Drivers ...............................................................17
7.10 Calibrating the Touch Screen ......................................................18
PPC65B-1x
v1.0 www.winsystems.com Page iii
7.11 Setting the Light Sensor Function ..................................................19
7.12 Watchdog Timer (WDT) ..........................................................19
7.12.1 Example Code for WDT ....................................................20
7.13 Reset CMOS BIOS Configuration ...................................................21
8 Configuration...........................................22
8.1 Component Layout ..............................................................22
8.1.1 Internal Components ......................................................22
8.2 Power........................................................................25
8.3 Connectors....................................................................25
8.3.1 DDR3 SO-DIMM Socket (J3) ................................................25
8.3.2 General Purpose I/O Pin Header (J8,5x2PinHeader) ............................25
8.3.3 RJ45 Connector (J13/J14) ..................................................26
8.3.4 Power Input Connector (J16) ................................................27
8.3.5 LCD Inverter Power Connector (J17,1x5PinWafer/2mm) ........................27
8.3.6 LCD LVDS Connector (J18,2x15PinHirose/1.25mm) ...........................28
8.3.7 Front Panel Connector (J20,1x5PinWafer/2mm) ..............................28
8.3.8 Touch Panel Connector (J21,1x5PinHeader/2.54mm) ..........................29
8.3.9 USB Port 3 Connector (J22,1x4PinWafer/2mm) ...............................29
8.3.10 CMOS Setup (JP1) ........................................................29
8.3.11 LCD Panel Inverter ON/OFF Signal Setup (JP2) ..................................30
8.3.12 LCD Panel Voltage Setup (JP3) ..............................................30
8.3.13 LCD Panel Type Setup (JP4) ................................................30
8.3.14 GPIO Power Selection (JP7).................................................31
8.3.15 Internal Audio Connector (JP8,4x1Pinheader) ................................31
8.3.16 LPC Debug Port Pin Assignment (JP9) ........................................32
8.3.17 COM2 Pin 9 Function Setup (JP10) ...........................................32
8.3.18 COM1 Pin 9 Function Setup (JP11) ...........................................32
8.3.19 COM4 Pin 9 Function Setup (JP12) ...........................................33
8.3.20 COM3 Pin 9 Function Setup (JP13) ...........................................33
8.3.21 LCD Resolution Setup (SW1) ................................................34
8.3.22 AT/ATX & BIOS Recovery Setup (SW2) ........................................35
9 BIOS Settings ..........................................36
9.1 General Information .............................................................36
9.2 Entering Setup .................................................................36
9.3 Navigating the Menus............................................................37
9.4 BIOS Screens ..................................................................37
10 Frequently Asked Questions.................................55
10.1 To what chemicals or compounds is the touch screen resistant? ..........................55
10.2 If the password of the system BIOS is lost, how can you reset the system? ..................55
PPC65B-1x
v1.0 www.winsystems.com Page iv
10.3 How can the system be configured for AT mode? ......................................55
11 Troubleshooting.........................................56
11.1 BIOS Settings ..................................................................56
11.1.1 Loading the Default Optimal Setting...........................................56
11.1.2 Reset CMOS BIOS Configuration .............................................56
11.1.3 Update BIOS.............................................................57
12 Cables and Software Drivers ................................57
Appendix A. Best Practices ....................................58
Appendix B. Mechanical Drawings ..............................60
Appendix C. Warranty Information ...............................65
PPC65B-1x/Before You Begin
v1.0 www.winsystems.com Page 1
1. Before You Begin
Review the warnings (in this section) and the best practice recommendations (see “Best
Practices” on page 58) when using and handling the WinSystems PPC65B-1x.
Adherence to these recommendations provides an optimal user experience and
prevents damage. Read through this document and become familiar with the PPC65B-
1x before proceeding.
1.1 Warnings
Only qualified personnel should configure and install the PPC65B-1x. While observing
the best practices, pay particular attention to the following:
2. Introduction
This manual provides configuration and usage information for the PPC65B-1x. If you
still have questions, contact Technical Support at (817) 274-7553, Monday through
Friday, between 8 AM and 5 PM Central Standard Time (CST).
Refer to the WinSystems website for other accessories (including cable drawings and
pinouts) that can be used with your PPC65B-1x.
3. Functionality
The PPC65B-1x Panel PC Series is IP65-certified and optimized for use in demanding
market applications including industrial machinery, utilities, petroleum, transportation,
pipeline and food processing, wherever there is need for tight system integration in a
minimal foot print.
FAILING TO COMPLY WITH THESE BEST PRACTICES MAY DAMAGE THE
PPC65B-1x AND VOID YOUR WARRANTY.
Avoid Electrostatic Discharge (ESD)
Only handle the circuit board and other bare electronics when electrostatic discharge
(ESD) protection is in place. Having a wrist strap and a fully grounded workstation is
the minimum ESD protection required before the ESD seal on the product bag is
broken.
Warning
Do not reverse the positive and negative terminals when you connect power to the
unit. This will void the warranty and damage the board.
PPC65B-1x/Features
v1.0 www.winsystems.com Page 2
High performance embedded applications will benefit from the PPC65B-1x’s 1.91 GHz
Quad-Core Intel®Atom™ E3845 processor. The panel PC is designed and engineered to
operate without a fan—even with the quad-core processor—resulting in quieter
operation, lower maintenance, and increased product service life.
The front panel and touchscreen of the PPC65B-1x are environmentally sealed to
protect the unit from damaging moisture, dust, and dirt when mounted in an IP65-rated
enclosure. It can also be attached to a 75 x 75 mm or 100 x 100 mm VESA mount.
Applications that require a conventional 2.5” SATA hard drive or 2.5” SATA SSD will
benefit from the built-in drive tray that facilitates easy insertion and removal of the drive
without the need for a SATA cable.
The PPC65B-1x series supports operating systems (OS) such as Linux and Windows
10. Contact an Applications Engineer for details on pre-installed operating system
options. The unit is engineered to meet and exceed industry standards for RF emissions
and susceptibility, is shock- and vibration-resistant, and confirmed to be compliant with
FCC Part 15 Class A and CE EN 55022/55024: 2010 Class A.
Information to configure and operate the PPC65B-1x for most applications is included
in this Product Manual or on our website at www.winsystems.com.
NOTE WinSystems can provide custom configurations for Original Equipment Manufacturer
(OEM) clients. For details, please contact an Application Engineer through Technical
Support (see contact information in the Introduction section on page 1).
4. Features
This section describes the features of the PPC65B-1x.
Package Contents
• One PPC65B-1x
• Panel mount kits
• HDD installation hardware
• 3-pin terminal block connector (female)
• I/O kit
• Available Options:
– 60 W Power Adapter with Power Cord (EU/US type) and Power Switch Cable
(from adapter to 3-pin terminal block connector)
Performance for Industrial IoT Applications
• 1.91 GHz Quad-Core Intel®Atom™ E3845 processor
• Upto8GBofRAM
• Supports Linux, Windows 10 Operating Systems
PPC65B-1x/Features
v1.0 www.winsystems.com Page 3
Rugged Design for Demanding Environments
• IP65-compliant fanless panel PC
• Front display sealed against water and dust
• Panel or VESA mounting configurations
• -20 °C to +70 °C operating temperature range
• SATA controller with 2.5-inch HDD/SSD tray
• Wide input power: 12 V-24 V DC
Fast Graphics at High Resolutions
• Five-wire resistive touchscreen
• Resolution: 1024 x 768 / 1280 x 1024
Connectivity and I/O for Embedded Systems
• 2x Gigabit Ethernet ports
• 1x USB 2.0 port (up to 3x with expansion)
• 1x USB 3.0 port
• Watchdog timer
Expansion Options
• 2x RS-232/422/485 plus 2x USB (default)
• 2x RS-232/422/485 plus 1x RS-232 (optional)
• 1x line-out, 1x RS-232/422/485 plus 2x USB (optional)
Embedded Single Board Computer (SBC)
• Single Board Computer
• Intel E3845 series Atom processor
– Core Speed: 1.91 GHz
– Number of Cores: 4
– L2 Cache: 2 MB
Operating Systems (compatibility)
The PPC65B-1x uses the Intel®BayTrail-I SOC. An older operating system might not be
able to recognize this chip. For compatibility issues with older Windows Operating
Systems such as Windows 8, please install the BayTrail-I SOC chipset component driver
(INF) before any other driver.
• Microsoft Windows
• Linux
• Other x86-compatible systems
PPC65B-1x/General Operation
v1.0 www.winsystems.com Page 4
Memory
• Up to 8 GB DDR3L 1333/1600 MHz SDRAM (one 204-pin SODIMM)
BIOS
• AMI BIOS
Power
Power Supply: 12 V-24 V DC input (3-pin Terminal Block Connector)
Temperature Specifics
• Operating temperature: -20 °C to +70 °C (-4 °F to +158 °F)
• Storage temperature: -40 °C to +85 °C (-40 °F to +185 °F), relative humidity (RH)
between 20-90%, non-condensing
5. General Operation
5.1 Touch Screen Components
The PPC65B-1x is a full-featured embedded system with a variety of on-board I/O
options. See Figure 5–1 Front View on page 5.
5.1.1 Ambient Light Sensor
The ambient light sensor detects light intensity in its surroundings. This feature allows
the Panel PC to adjust panel brightness accordingly.
5.1.2 TFT-LCD Display with Touch
The PPC65B-1x has a built in a TFT-LCD display and designed with a 5-wire resistive
touch screen. The touch screen allows contacts of pen or finger to move the mouse
pointer. This function requires integrating the necessary software.
NOTE Do not use a hard or a pointed object (like screw drivers or pliers) to operate the touch
screen.
NOTE For OEMs, an optional projective capacitive (P-CAP) touch screen is available.
5.1.3 Aluminum Front Bezel
Rugged Aluminum front bezel meets IP65 protection.
PPC65B-1x/General Operation
v1.0 www.winsystems.com Page 5
5.1.4 Black Overlay
The following figures illustrate the basic features of the PPC65B-1x:
Figure 5–1: Front View
5.2 Touch Screen External Control, Connector, and Indicator Locations
The PPC65B-1x external connectors, indicators (LEDs) and controls are located on the
bottom of the unit. See Figure 5–2 Bottom View on page 6. For access covers, see
Figure 5–3 Top View on page 6 and Figure 5–4 Side Views on page 7.
NOTE See “Connecting Power to J16” on page 13 and “Connecting Components” on page 13
for information on the connectors.
5.2.1 Power Button
Press the power button to turn ON/OFF the PPC65B-1x.
5.2.2 Reset Button
Press the reset button to restart the PPC65B-1x.
Ambient Light Sensor
Aluminum Front Bezel Black Overlay TFT-LCD Display with Touch
Indice
Altri manuali WinSystems Pannello touch
