Wireless Devices EM-898 Series Manuale utente
1
PC Base Paging System (POCSAG)
(Option with 300 subscribers and 30 can messages data base)
Model No. EM-898 Series
Operation Manual
Wireless Devices Inc. (Taiwan)
Wireless Devices Inc. (Taiwan)
2
The EM-898 paging device series is designed to automatically and instantly page the
e-mail subscriber within the coverage area once the P/C or Notebook receives the
incoming e-mail messages. Also, you can take it as your owned office paging system.
The EM-898-10 is built-in 10mW Transmitter.
The EM-898-50 is built-in 50mW Transmitter.
The EM-898-100 is built-in 100mW Transmitter.
The EM-898-150 is built-in 150mW Transmitter.
3
Specifications
Item NO. EM-898-10/50 EM-898-100 EM-898-150
Frequency: One Channel from 410MHz to 490MHz by crystals controlled.
Frequency
Stability:: 10 ppm at 25ºC. 10 ppm at 25ºC. 10 ppm at 25ºC.
Paging
format: POCSAG
Baud rate: 512bps / 1200bps / 2400bps.
Message
data: Numeric or alpha-numeric, max 40 characters per each paging
RF output 10~50mW 100mW 150mW
Modulation: FSK ,
Deviation: 4.5Khz
Operation
Temp: -20ºC ~ +70ºC.
Pager
Capacity: from 8 to 2097151 Pager Capcode
Operating
Voltage: +5V from USB port
Coverage
distance
about 8,000 square
Meter
about 50,000 square
Meter
about 85,000 square
Meter
Size of
Housing::
90mm X 23mm X
16mm
90mm X 23mm X
16mm
90mm X 23mm X
16mm
Model
Weight: 30gs 32gs 38gs
4
A. Operation Instructions
1. Connect the EM-898 into the USB port of your P/C or N/B
5
2. Install the [eMailToPager] software CD execution file into your P/C or N/B
3. Click [eMailToPager] icon to run the application software.
Example Programming Screen as below
a. Capcode : This is for 7 digits POCSAG address. And it must be same as the used receiving pager.
b. Date rate : This should also be set on the same speed rate with the used pagers.
And the baud rate is in POCSAG 512bps or 1200bps or 2400bps type only.
c. Check Time : Check times per minute for your e-mail messages incoming.
d. Send Time : Message forwarding to the receiving pager per set minutes.
e. Send count : Counting for message forwarding times.
f. Length : Each forwarding alphabet length (maximum in 40 characters).
g. Time: With or without the forwarding e-mail message containing the actual receiving time.
h. sender: With or without the forwarding e-mail message containing the sender name.
i. Subject: With or without the forwarding e-mail message containing the subject contents.
j. Content: With or without the forwarding e-mail message containing the e-mail contents.
k. TEST: The EM-898 can be operated as a simple on-site office paging transmitter. Simply types in
your desired message in this block and click the [SEND] icon to start the transmission to pager.
6
Option [Office Pager] OS operations
2. Install the [Office Pager] software CD execution file into your P/C or N/B
3. Click [Office Pager System v1.0] icon to run the application software.
OS set-up
Click [Setting] for contents set-up
7
Set-up Pager No. Name, Cap code, data rate, State, and type of message….
State =Y is enable
State =N is disable
Click [Can Msg] icon to set-up the 30 can message files
8
Click [Save] icon to Save the can message files
Also you can either select the can message or directly key in the message
Click [Send Msg] to sending to pager (on-air)
Wireless Devices Inc. (Taiwan)
Indice
Altri manuali Wireless Devices Microfono
