Wireless Prime TWO IN ONE 2000M-H Guida del prodotto

Indice

Altri manuali Wireless Prime Sistema microfonico

Wireless Prime

Wireless Prime FOUR IN ONE 2000M Guida del prodotto

Manuali Sistema microfonico popolari di altre marche

Paso

Paso R824 Manuale utente

Naxa

Naxa NAM-982 Manuale utente

Motorola

Motorola PMNN4461 Manuale utente

Xvive

Xvive U3 Manuale utente

Tekon

Tekon DUOS Manuale utente

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manuale utente

Devine

Devine WMD-IE Manuale utente

LG LF-D7150 Manuale utente

GE S768DAV Manuale utente

LD U305 HBH 2 Manuale utente

Chainway

Chainway URA8 Manuale utente

ORATOR

ORATOR D860TD Manuale utente

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuale utente

Alpha Technologies

Alpha Technologies RBMS Manuale utente

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manuale utente

Shure

Shure UA844 Manuale utente

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuale utente

Pyle

Pyle PDWM5000 Manuale utente

TWO IN ONE 2000M-H FULL-HD

WIRELESS VIDEO TRANSMISSION

MANUAL BOOK

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless

transmission system. The 4 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 4 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Double screw the

connector*4 pieces Rs232 cable

*4 pieces

RS232 cable

*1 pieces

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability,

WIRELESSPRIME. reserves the right to make changes to the products described

in this document without notice.

WIRELESSPRIME does not assume any liability that may occur due to the use

or application of the product(s) or circuit layout(s) described herein.

FCC Compliance Notice: Radio Frequency Notice

The device has met the FCC 15.247 requirement. In order to comply with the FCC RF

exposure requirement, the user must keep 20cm away from the antenna.

This device has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

device generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this device does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following mea-

sures:

• Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

•

Information to the user

The user’s manual or instruction manual for an intentional or unintentional radiator

shall caution the user that changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equip-

ment. In cases where the manual is provided only in a form other than paper, such as

on a computer disk or over the Internet, the information required by this section may

be included in the manual in that alternative form, provided the user can reasonably be

expected to have the capability to access information in that form.

Contents

About the User Manual 1

11Product Application

Product Installation

Structure & Interface

Brief introduction

OLED Display Description

LED Digits Display description 12

Product Specifications 20

Precautions

Disclaimers

Trouble shooting

26About Wireless Prime

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless

transmission system. The 4 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 4 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Double screw the

connector*4 pieces Rs232 cable

*4 pieces

RS232 cable

*1 pieces

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Duo is a set of 2TX-to-1RX full-HD audio and video wireless

transmission system. The 2 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

2 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Power supply cable

*2 pieces

Transmitter *2 pieces Antenna

* 8 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 2 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 2 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

2TX-to-1RX and 2TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 2TX-to-1RX and 2TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Double screw the

connector*2 pieces RS232 cable

*2 pieces

RS232 cable

*1 pieces

Introduction

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless

transmission system. The 4 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 4 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Double screw the

connector*4 pieces Rs232 cable

*4 pieces

RS232 cable

*1 pieces

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless

transmission system. The 4 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 4 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Double screw the

connector*4 pieces Rs232 cable

*4 pieces

RS232 cable

*1 pieces

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless

transmission system. The 4 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 4 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Double screw the

connector*4 pieces Rs232 cable

*4 pieces

RS232 cable

*1 pieces

About the User Manual

Brief Introduction

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Duo is a set of 2TX-to-1RX full-HD audio and video wireless

transmission system. The 2 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

2 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Power supply cable

*2 pieces

Transmitter *2 pieces Antenna

* 8 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 2 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 2 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

2TX-to-1RX and 2TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 2TX-to-1RX and 2TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Double screw the

connector*2 pieces RS232 cable

*2 pieces

RS232 cable

*1 pieces

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Duo is a set of 2TX-to-1RX full-HD audio and video wireless

transmission system. The 2 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

2 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Power supply cable

*2 pieces

Transmitter *2 pieces Antenna

* 8 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 2 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 2 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

2TX-to-1RX and 2TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 2TX-to-1RX and 2TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Double screw the

connector*2 pieces RS232 cable

*2 pieces

RS232 cable

*1 pieces

Introduction

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless

transmission system. The 4 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 4 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Double screw the

connector*4 pieces Rs232 cable

*4 pieces

RS232 cable

*1 pieces

Structure & Interface

TX: 7060

V-Mount

03 04

Structure & Interface

Antenna Interface

Antenna Interface Power Switch

Tally out

DC-IN

Transmitter Key Operation

Function Operation Description

High-gain and

low-gain mode

switching

Press the

“LNA ON/OFF”

button for

about 3s

“L” (low-gain) mode:

Applicable for close-range(<200m/656ft

& LOS) and environments,

with strong anti-interference ability.

After switching to L mode, the “L” character

will be displayed on the OLED display.

strong interference

“H” (high-gain) mode: Applicable for

long distances, (NLOS or>200m/656ft)

and the anti-interference ability is weaker

than that in “L” mode. After switching to

H mode, the characters on the OLED

display will disappear.

Code matching

Press the

“WPS/RTSP”

button for

about 3s

In the code matching process of the

transmitter and receiver, the word

“WPS” will always be displayed on

the OLED display, and the string will

disappear after the code matching.

The transmitter and receiver need to

be in code matching status at the same

time to achieve code matching.

Standard and

streaming mode

switching

Press the

“WPS ”

button for

about 6s

/RTSP

When switching to streaming mode,

the word “RTSP” will be displayed on the

OLED display, and the product will enter

streaming mode.

Restart the

encoding

board

Press the

“RESET”

button for

about 3s

During the restart of the encoding board,

the “RESET” string will always be

displayed on the OLED display of the

transmitter, and the string will disappear

after the restart.

LNA ON/OFF

WPS/RTSP

Reset

OLED Display

Network status

warning light

SDI In

HDMI In

RS232/422

SONY NPF Battery dock

Tips:in RTSP mode,the decoding

function is disabled

TX: 7060

V-Mount

03 04

Structure & Interface

Antenna Interface

Antenna Interface Power Switch

Tally out

DC-IN

Transmitter Key Operation

Function Operation Description

High-gain and

low-gain mode

switching

Press the

“LNA ON/OFF”

button for

about 3s

“L” (low-gain) mode:

Applicable for close-range(<200m/656ft

& LOS) and environments,

with strong anti-interference ability.

After switching to L mode, the “L” character

will be displayed on the OLED display.

strong interference

“H” (high-gain) mode: Applicable for

long distances, (NLOS or>200m/656ft)

and the anti-interference ability is weaker

than that in “L” mode. After switching to

H mode, the characters on the OLED

display will disappear.

Code matching

Press the

“WPS/RTSP”

button for

about 3s

In the code matching process of the

transmitter and receiver, the word

“WPS” will always be displayed on

the OLED display, and the string will

disappear after the code matching.

The transmitter and receiver need to

be in code matching status at the same

time to achieve code matching.

Standard and

streaming mode

switching

Press the

“WPS ”

button for

about 6s

/RTSP

When switching to streaming mode,

the word “RTSP” will be displayed on the

OLED display, and the product will enter

streaming mode.

Restart the

encoding

board

Press the

“RESET”

button for

about 3s

During the restart of the encoding board,

the “RESET” string will always be

displayed on the OLED display of the

transmitter, and the string will disappear

after the restart.

LNA ON/OFF

WPS/RTSP

Reset

OLED Display

Network status

warning light

SDI In

HDMI In

RS232/422

SONY NPF Battery dock

Tips:in RTSP mode,the decoding

function is disabled

Structure & Interface

TX: 7060

V-Mount

03 04

Structure & Interface

Antenna Interface

Antenna Interface Power Switch

Tally out

DC-IN

Transmitter Key Operation

Function Operation Description

High-gain and

low-gain mode

switching

Press the

“LNA ON/OFF”

button for

about 3s

“L” (low-gain) mode:

Applicable for close-range(<200m/656ft

& LOS) and environments,

with strong anti-interference ability.

After switching to L mode, the “L” character

will be displayed on the OLED display.

strong interference

“H” (high-gain) mode: Applicable for

long distances, (NLOS or>200m/656ft)

and the anti-interference ability is weaker

than that in “L” mode. After switching to

H mode, the characters on the OLED

display will disappear.

Code matching

Press the

“WPS/RTSP”

button for

about 3s

In the code matching process of the

transmitter and receiver, the word

“WPS” will always be displayed on

the OLED display, and the string will

disappear after the code matching.

The transmitter and receiver need to

be in code matching status at the same

time to achieve code matching.

Standard and

streaming mode

switching

Press the

“WPS ”

button for

about 6s

/RTSP

When switching to streaming mode,

the word “RTSP” will be displayed on the

OLED display, and the product will enter

streaming mode.

Restart the

encoding

board

Press the

“RESET”

button for

about 3s

During the restart of the encoding board,

the “RESET” string will always be

displayed on the OLED display of the

transmitter, and the string will disappear

after the restart.

LNA ON/OFF

WPS/RTSP

Reset

OLED Display

Network status

warning light

SDI In

HDMI In

RS232/422

SONY NPF Battery dock

Tips:in RTSP mode,the decoding

function is disabled

TX: 7060

V-Mount

03 04

Structure & Interface

Antenna Interface

Antenna Interface Power Switch

Tally out

DC-IN

Transmitter Key Operation

Function Operation Description

High-gain and

low-gain mode

switching

Press the

“LNA ON/OFF”

button for

about 3s

“L” (low-gain) mode:

Applicable for close-range(<200m/656ft

& LOS) and environments,

with strong anti-interference ability.

After switching to L mode, the “L” character

will be displayed on the OLED display.

strong interference

“H” (high-gain) mode: Applicable for

long distances, (NLOS or>200m/656ft)

and the anti-interference ability is weaker

than that in “L” mode. After switching to

H mode, the characters on the OLED

display will disappear.

Code matching

Press the

“WPS/RTSP”

button for

about 3s

In the code matching process of the

transmitter and receiver, the word

“WPS” will always be displayed on

the OLED display, and the string will

disappear after the code matching.

The transmitter and receiver need to

be in code matching status at the same

time to achieve code matching.

Standard and

streaming mode

switching

Press the

“WPS ”

button for

about 6s

/RTSP

When switching to streaming mode,

the word “RTSP” will be displayed on the

OLED display, and the product will enter

streaming mode.

Restart the

encoding

board

Press the

“RESET”

button for

about 3s

During the restart of the encoding board,

the “RESET” string will always be

displayed on the OLED display of the

transmitter, and the string will disappear

after the restart.

LNA ON/OFF

WPS/RTSP

Reset

OLED Display

Network status

warning light

SDI In

HDMI In

RS232/422

SONY NPF Battery dock

Tips:in RTSP mode,the decoding

function is disabled

Structure & Interface

V-Mount

RX: 3060

05 06

Antenna Interface

Tally(DB9)

RJ-45

RS232/422

SDI Out

DC-IN

HDMI Out

Antenna Interface

OLED Display

LNA ON/OFF

CH/WPS

Reset

Power Button

Receiver Key Operation

Function Operation Description

Frequency

channel

switching

Short press

the “CH/WPS”

button about 1S

After the receiver switches the frequency

, the OLED display of the

receiver and transmitter will display the new

frequency number after

switching.

channel about 1S

High-gain and

low-gain mode

switching

Press the “LNA

ON/OFF” button

for about 3s

“L” (low-gain) mode:

Applicable for close-range

and strong interference

environments, with strong anti-interference

ability. After switching to L mode,

the “L” character will be displayed on the

OLED display.

(LOS &TX-to-RX

<200m/656ft )

“

(NLOS or

TX-to-RX>200m/656ft)

H” (high-gain) mode:

Applicable for long distances,

and the anti-

interference ability is weaker than that in “L”

mode. After switching to H mode, the

characters on the OLED display will disappear.

Code matching

Press the “CH/

WPS” button for

about 3s

In the code matching process of the

transmitter and receiver, the word “WPS”

will always be displayed on the OLED

display, and the string will disappear after

the code matched. The transmitter and

receiver need to be in code matching

status at the same time to achieve

code matching.

OLED display

switching

between

landscape

mode and

portrait mode

Short press the

“LNA ON/OFF”

button for

about 1s

Short press the “LNA ON/OFF” button,

and the display will switch between

landscape mode and portrait mode.

Restart a

certain

channel video

of the receiver

First, short press

the [RESET] button

for cyclical selection

among 1, 2, 3 and 4 to

restart the decoding

board in the channel.

Then press and hold

the [RESET] button

for 3s to confirm

the restart.

After long pressing the button to confirm,

the “RESET” string will be displayed on

the OLED display for 3s, and the string

will disappear after the decoding board

begins to restart.

V-mount Plate

V-Mount

RX: 3060

05 06

Antenna Interface

Tally(DB9)

RJ-45

RS232/422

SDI Out

DC-IN

HDMI Out

Antenna Interface

OLED Display

LNA ON/OFF

CH/WPS

Reset

Power Button

Receiver Key Operation

Function Operation Description

Frequency

channel

switching

Short press

the “CH/WPS”

button about 1S

After the receiver switches the frequency

, the OLED display of the

receiver and transmitter will display the new

frequency number after

switching.

channel about 1S

High-gain and

low-gain mode

switching

Press the “LNA

ON/OFF” button

for about 3s

“L” (low-gain) mode:

Applicable for close-range

and strong interference

environments, with strong anti-interference

ability. After switching to L mode,

the “L” character will be displayed on the

OLED display.

(LOS &TX-to-RX

<200m/656ft )

“

(NLOS or

TX-to-RX>200m/656ft)

H” (high-gain) mode:

Applicable for long distances,

and the anti-

interference ability is weaker than that in “L”

mode. After switching to H mode, the

characters on the OLED display will disappear.

Code matching

Press the “CH/

WPS” button for

about 3s

In the code matching process of the

transmitter and receiver, the word “WPS”

will always be displayed on the OLED

display, and the string will disappear after

the code matched. The transmitter and

receiver need to be in code matching

status at the same time to achieve

code matching.

OLED display

switching

between

landscape

mode and

portrait mode

Short press the

“LNA ON/OFF”

button for

about 1s

Short press the “LNA ON/OFF” button,

and the display will switch between

landscape mode and portrait mode.

Restart a

certain

channel video

of the receiver

First, short press

the [RESET] button

for cyclical selection

among 1, 2, 3 and 4 to

restart the decoding

board in the channel.

Then press and hold

the [RESET] button

for 3s to confirm

the restart.

After long pressing the button to confirm,

the “RESET” string will be displayed on

the OLED display for 3s, and the string

will disappear after the decoding board

begins to restart.

V-mount Plate

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless

transmission system. The 4 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 4 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Double screw the

connector*4 pieces Rs232 cable

*4 pieces

RS232 cable

*1 pieces

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Duo is a set of 2TX-to-1RX full-HD audio and video wireless

transmission system. The 2 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

2 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Power supply cable

*2 pieces

Transmitter *2 pieces Antenna

* 8 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 2 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 2 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

2TX-to-1RX and 2TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 2TX-to-1RX and 2TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Double screw the

connector*2 pieces RS232 cable

*2 pieces

RS232 cable

*1 pieces

05 06

Receiver Key Operation

Function Operation Description

Frequency

channel

switching

Short press

the “CH/WPS”

button about 1S

After the receiver switches the frequency

, the OLED display of the

receiver and transmitter will display the new

frequency number after

switching.

channel about 1S

High-gain and

low-gain mode

switching

Press the “LNA

ON/OFF” button

for about 3s

“L” (low-gain) mode:

Applicable for close-range

and strong interference

environments, with strong anti-interference

ability. After switching to L mode,

the “L” character will be displayed on the

OLED display.

(LOS &TX-to-RX

<200m/656ft )

“

(NLOS or

TX-to-RX>200m/656ft)

H” (high-gain) mode:

Applicable for long distances,

and the anti-

interference ability is weaker than that in “L”

mode. After switching to H mode, the

characters on the OLED display will disappear.

Code matching

Press the “CH/

WPS” button for

about 3s

In the code matching process of the

transmitter and receiver, the word “WPS”

will always be displayed on the OLED

display, and the string will disappear after

the code matched. The transmitter and

receiver need to be in code matching

status at the same time to achieve

code matching.

OLED display

switching

between

landscape

mode and

portrait mode

Short press the

“LNA ON/OFF”

button for

about 1s

Short press the “LNA ON/OFF” button,

and the display will switch between

landscape mode and portrait mode.

Restart a

certain

channel video

of the receiver

First, short press

the [RESET] button

for cyclical selection

among 1, 2, 3 and 4 to

restart the decoding

board in the channel.

Then press and hold

the [RESET] button

for 3s to confirm

the restart.

After long pressing the button to confirm,

the “RESET” string will be displayed on

the OLED display for 3s, and the string

will disappear after the decoding board

begins to restart.

V-Mount

RX: 3062

Antenna Interface

RJ-45

SDI Out

DC-IN

HDMI Out

OLED Display

LNA ON/OFF

CH/WPS

Reset

Power Switch

RS232/422

Tally in

Antenna Interface

V-mount Plate

Structure & Interface

V-Mount

RX: 3060

05 06

Antenna Interface

Tally(DB9)

RJ-45

RS232/422

SDI Out

DC-IN

HDMI Out

Antenna Interface

OLED Display

LNA ON/OFF

CH/WPS

Reset

Power Button

Receiver Key Operation

Function Operation Description

Frequency

channel

switching

Short press

the “CH/WPS”

button about 1S

After the receiver switches the frequency

, the OLED display of the

receiver and transmitter will display the new

frequency number after

switching.

channel about 1S

High-gain and

low-gain mode

switching

Press the “LNA

ON/OFF” button

for about 3s

“L” (low-gain) mode:

Applicable for close-range

and strong interference

environments, with strong anti-interference

ability. After switching to L mode,

the “L” character will be displayed on the

OLED display.

(LOS &TX-to-RX

<200m/656ft )

“

(NLOS or

TX-to-RX>200m/656ft)

H” (high-gain) mode:

Applicable for long distances,

and the anti-

interference ability is weaker than that in “L”

mode. After switching to H mode, the

characters on the OLED display will disappear.

Code matching

Press the “CH/

WPS” button for

about 3s

In the code matching process of the

transmitter and receiver, the word “WPS”

will always be displayed on the OLED

display, and the string will disappear after

the code matched. The transmitter and

receiver need to be in code matching

status at the same time to achieve

code matching.

OLED display

switching

between

landscape

mode and

portrait mode

Short press the

“LNA ON/OFF”

button for

about 1s

Short press the “LNA ON/OFF” button,

and the display will switch between

landscape mode and portrait mode.

Restart a

certain

channel video

of the receiver

First, short press

the [RESET] button

for cyclical selection

among 1, 2, 3 and 4 to

restart the decoding

board in the channel.

Then press and hold

the [RESET] button

for 3s to confirm

the restart.

After long pressing the button to confirm,

the “RESET” string will be displayed on

the OLED display for 3s, and the string

will disappear after the decoding board

begins to restart.

V-mount Plate

V-Mount

RX: 3060

05 06

Antenna Interface

Tally(DB9)

RJ-45

RS232/422

SDI Out

DC-IN

HDMI Out

Antenna Interface

OLED Display

LNA ON/OFF

CH/WPS

Reset

Power Button

Receiver Key Operation

Function Operation Description

Frequency

channel

switching

Short press

the “CH/WPS”

button about 1S

After the receiver switches the frequency

, the OLED display of the

receiver and transmitter will display the new

frequency number after

switching.

channel about 1S

High-gain and

low-gain mode

switching

Press the “LNA

ON/OFF” button

for about 3s

“L” (low-gain) mode:

Applicable for close-range

and strong interference

environments, with strong anti-interference

ability. After switching to L mode,

the “L” character will be displayed on the

OLED display.

(LOS &TX-to-RX

<200m/656ft )

“

(NLOS or

TX-to-RX>200m/656ft)

H” (high-gain) mode:

Applicable for long distances,

and the anti-

interference ability is weaker than that in “L”

mode. After switching to H mode, the

characters on the OLED display will disappear.

Code matching

Press the “CH/

WPS” button for

about 3s

In the code matching process of the

transmitter and receiver, the word “WPS”

will always be displayed on the OLED

display, and the string will disappear after

the code matched. The transmitter and

receiver need to be in code matching

status at the same time to achieve

code matching.

OLED display

switching

between

landscape

mode and

portrait mode

Short press the

“LNA ON/OFF”

button for

about 1s

Short press the “LNA ON/OFF” button,

and the display will switch between

landscape mode and portrait mode.

Restart a

certain

channel video

of the receiver

First, short press

the [RESET] button

for cyclical selection

among 1, 2, 3 and 4 to

restart the decoding

board in the channel.

Then press and hold

the [RESET] button

for 3s to confirm

the restart.

After long pressing the button to confirm,

the “RESET” string will be displayed on

the OLED display for 3s, and the string

will disappear after the decoding board

begins to restart.

V-mount Plate

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless

transmission system. The 4 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

4 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 4 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 4 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Power supply cable

*4 pieces

Transmitter *4 pieces Antenna

* 16 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Double screw the

connector*4 pieces Rs232 cable

*4 pieces

RS232 cable

*1 pieces

01 02

About the User Manual

This Manual details the product specifications, instructions for use,

precautions, and troubleshooting. Read the Manual carefully before using

the product. If you have any questions or difficulties in using this product,

contact the company or the seller in time.

Product Features

BeamLink Duo is a set of 2TX-to-1RX full-HD audio and video wireless

transmission system. The 2 video channel transmission shares one wireless

channel and supports the highest video resolution up to 1080P/60Hz.

This system is based on 5G wireless network technology for transmission,

along with advanced 4×4 MIMO and Beam-Forming technology. Image

processing is performed using H.264 coding-decoding technology,

and the video quality is sharp and the latency is lower.

Brief Introduction

This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD

input and output, with the highest resolution of 1080P/60Hz. With the use of H.264

coding-decoding technology with high compression ratio and high definition,

the images have high definition, and the latency is as low as 70ms.

2 transmitters and 1 receiver share one wireless channel

Beam-Forming

Combined with 4×4 MIMO and Beam-Forming technology, this product has

advantages over other WiFi products in the market in terms of transmission

distance and image bitrate. Beam-Forming technology makes wireless signals

more concentrated and stronger in the direction from which they are transmitted

to the receiver, allowing them to transmit farther and be less susceptible to

interference from other signals, thus making them more stable.

Packing List

The following items are included in the product package

Power supply cable

*2 pieces

Transmitter *2 pieces Antenna

* 8 pieces

Receiver *1 piece Antenna *4 pieces Power adapter *1 piece Metal Stand *1 piece

Notice: The transmitter comes with the Sony NP-F type battery dock and has

preassembled V-mount connector. The receiver has preassembled V-mount battery

plate and V-mount connector.

This product supports 2 channel videos simultaneous input, with resolution

up to 1080P60 per channel. 2 channel videos shares one wireless channel,

which greatly saves spectrum resources and provides great convenience for

users to perform multi-camera shooting.

High-quality and ultra low latency

This product supports switching between two operating modes, namely standard

mode and RTSP streaming mode. In standard mode, this product supports

2TX-to-1RX and 2TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.

In RTSP streaming mode, this product supports 2TX-to-1RX and 2TX-to-2RX,

and the video streaming interface is LAN port(RJ45) ..

Support RS232/422

This product supports signal transmission via RS232/422 interface,

which is convenient for users to control the transmitting terminal through the

device at the receiving terminal, such as the PTZ.

controlling

Support monitoring on mobile devices

This product supports monitoring on portable devices, like mobile phone,

tablet and PC. User can install live streaming tool supporting RTSP like VLC

on mobile device, and connect portable devices with receiver via WiFi to watch

the live video with different transmitter IP address.

Standard mode and streaming mode

Double screw the

connector*2 pieces RS232 cable

*2 pieces

RS232 cable

*1 pieces

05 06

Receiver Key Operation

Function Operation Description

Frequency

channel

switching

Short press

the “CH/WPS”

button about 1S

After the receiver switches the frequency

, the OLED display of the

receiver and transmitter will display the new

frequency number after

switching.

channel about 1S

High-gain and

low-gain mode

switching

Press the “LNA

ON/OFF” button

for about 3s

“L” (low-gain) mode:

Applicable for close-range

and strong interference

environments, with strong anti-interference

ability. After switching to L mode,

the “L” character will be displayed on the

OLED display.

(LOS &TX-to-RX

<200m/656ft )

“

(NLOS or

TX-to-RX>200m/656ft)

H” (high-gain) mode:

Applicable for long distances,

and the anti-

interference ability is weaker than that in “L”

mode. After switching to H mode, the

characters on the OLED display will disappear.

Code matching

Press the “CH/

WPS” button for

about 3s

In the code matching process of the

transmitter and receiver, the word “WPS”

will always be displayed on the OLED

display, and the string will disappear after

the code matched. The transmitter and

receiver need to be in code matching

status at the same time to achieve

code matching.

OLED display

switching

between

landscape

mode and

portrait mode

Short press the

“LNA ON/OFF”

button for

about 1s

Short press the “LNA ON/OFF” button,

and the display will switch between

landscape mode and portrait mode.

Restart a

certain

channel video

of the receiver

First, short press

the [RESET] button

for cyclical selection

among 1, 2, 3 and 4 to

restart the decoding

board in the channel.

Then press and hold

the [RESET] button

for 3s to confirm

the restart.

After long pressing the button to confirm,

the “RESET” string will be displayed on

the OLED display for 3s, and the string

will disappear after the decoding board

begins to restart.

V-Mount

RX: 3062

Antenna Interface

RJ-45

SDI Out

DC-IN

HDMI Out

OLED Display

LNA ON/OFF

CH/WPS

Reset

Power Switch

RS232/422

Tally in

Antenna Interface

V-mount Plate

Product Installation

For transmitter

07 08

H D M I

SDI H D M I

HDMI Input

3G-SDI Input

Product Installation

2. Please fix the transmitter via the screw at the bottom or the V-mount at the back,

and place it at a height of around 1.5 to 2 meters above floor. Please make sure

that the distance between each transmitter is more than 1 meter.

1. Please install all the antennas on the transmitter and make them in a fan shape

as shown in the picture.

Distance>1m

Transmitter at a height of

around 1.5 to 2 meters

above floor.

Distance>1m Distance>1m

3. Please connect the transmitter and camera with SDI or HDMI cable.

For transmitter

07 08

H D M I

SDI H D M I

HDMI Input

3G-SDI Input

Product Installation

2. Please fix the transmitter via the screw at the bottom or the V-mount at the back,

and place it at a height of around 1.5 to 2 meters above floor. Please make sure

that the distance between each transmitter is more than 1 meter.

1. Please install all the antennas on the transmitter and make them in a fan shape

as shown in the picture.

Distance>1m

Transmitter at a height of

around 1.5 to 2 meters

above floor.

Distance>1m Distance>1m

3. Please connect the transmitter and camera with SDI or HDMI cable.

Product Installation

For transmitter

07 08

H D M I

SDI H D M I

HDMI Input

3G-SDI Input

Product Installation

2. Please fix the transmitter via the screw at the bottom or the V-mount at the back,

and place it at a height of around 1.5 to 2 meters above floor. Please make sure

that the distance between each transmitter is more than 1 meter.

1. Please install all the antennas on the transmitter and make them in a fan shape

as shown in the picture.

3. Please connect the transmitter and camera with SDI or HDMI cable.

Distance>1m

Transmitter at a height of

around 1.5 to 2 meters

above floor.

For transmitter

07 08

H D M I

SDI H D M I

HDMI Input

3G-SDI Input

Product Installation

2. Please fix the transmitter via the screw at the bottom or the V-mount at the back,

and place it at a height of around 1.5 to 2 meters above floor. Please make sure

that the distance between each transmitter is more than 1 meter.

1. Please install all the antennas on the transmitter and make them in a fan shape

as shown in the picture.

3. Please connect the transmitter and camera with SDI or HDMI cable.

Distance>1m

Transmitter at a height of

around 1.5 to 2 meters

above floor.