Wise & Blue WB120 Manuale utente
Bluetooth wireless technology allows you to connect
compatible communication devices without cables.
A Bluetooth connection does not require that the phone
and the headset be in line of sight, but both devices should
be within 10meters(33 feet) of each other. Connections can
be subject to interference from obstructions, such as walls,
or other electronic devices.
The headset is compliant with the Bluetooth Specification
2.0 supporting the following profiles : headset profile and
Hands-Free Profile. Check with the manufacturers of other
devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in
some locations. Check with your authorities or service
provider.
3
User ManualHand strap
CradleEarloop pack(option)
Car Holder
Travel Charger
Extra Ear-rubber
(Small, Large)
Headset
2
WB120 PACKAGE CONTENTSINTRODUCTION
Bluetooth wireless technology
1Make sure that your headset is fully charged
before you start using it.
2Plug the charger cable into the Charging
Socket.
-The red LED turns on when the headset is charging (If the
headset is completely discharged, It may take a couple of
minutes for the LED to turn on). When the headset is fully
charged (about 2hours), The red LED turns off.
-When battery power is low, the red LED starts to flash and
you can hear beep.
54
WB120 Overview
Charge your Headset
GETTING STARTED
To turning on :Press and hold for 3 seconds the call button
until the LED flashes Blue.
To turning off :Press and hold for 5 seconds the Call Button
until the LED flashes Red.
Before you use the headset, you need to pair it
with your phone.
1Turing on the headset.
2Fold the earpiece and then you can see the
LED flashes alternately Blue and Red.
3When the LED starts to flash ‘Blue and Red F,
set your phone to discover “ WB120”
76
Pair it with your phone
Turning your headset on and off
3 sec
5 sec
1To wear the headset, Fold the
earpiece.
2Plug the headset into your ear and
point the headset toward your
mouth.
For optimal performance, wear the
Headset and your phone on the same
side of your body.
4
Set your Bluetooth phone to discover the
WB120
A) Follow your phone instruction guide
• Going to Bluetooth menu on your phone and selecting the
option to
discover
or
connect
a Bluetooth device
(and select the
Handsfree
mode if your phone ask).
B) Your phone will find the
WB120
• If you want to pair with it, press
YES
or
OK
on the phone.
• Enter the passkey or PIN = 0000(4 zeros) and press
YES
or
OK
on the phone.
• Once connected to your Bluetooth phone, The LED flashes
Blue.
• Your headset is now set up and ready to be used.
98
Wearing the Headset
1) It is better to try pair your headset with the phone close-by.
2) Once you have paired your headset with the phone, You
don
t need to pair it again until you want to use it with
another phone.
3) In case of unsuccessful pairing, repeat steps 2 to 3.
4) Blue and Red flashing (Pairing Mode) will return to Stand-
by mode (the LED flashes Blue) if not paired in 10minutes.
Note
Pair it with your phone
1110
Using your Headset
1Hold
Call button is locked when the earpiece is unfolded.
It can prevent unwished call.
All the functions except power On/Off do not work
in “Hold” Mode.
Hold Mode
2Answer a call
Fold the earpiece or tap the call button to answer
an incoming call.
3End a call
Unfold the earpiece or tap the call button to end
an active call.
1312
Using your Headset
7Reject a call (Phone dependent)
Press and hold for 2 seconds the Call Button when the
phone rings to reject an incoming call.
6Activate voice dialing (Phone dependent)
1) Tap the Call Button.
2) You can hear the Audio signal.
3) Speak the name of the person that you want to call.
※ To cancel Voice Dialing, Tap the Call Button.
※ Please consult your phone's user manual for more information
about using this feature.
5Adjust Volume
Press the Volume Up or Down Button to adjust the volume
4Make a call
Enter number on your phone and press send, and the call
is automatically transferred to the headset. If your phone
does not support this function, Press and hold for 2 seconds
the Call Button after entering number on your phone.
2s
1514
Using your Headset
Some features are phone/network dependent. See
your phone
s user manual for more information
Note
12 Transfer an active call
From the phone to the headset : Press and hold for 3
seconds the Call Button during a call.
From the headset to the phone : Press and hold for 3
seconds the Call Button during a call.
10 3way call (Phone dependent)
Press and hold for 6 seconds the volume up button
to place the active call on hold and answer the waiting call.
Press and hold for 6 seconds the volume up button
to switch between the two calls.
Press and hold for 6 seconds the volume down button
to end the active call.
11 Auto reconnection
After successful pairing, the headset automatically
reconnects to your phone when the headset is turned on.
8Redial last call (Phone dependent)
Press and hold for 2 seconds to call back the last
number.
9Mute a call
Mute on : Press and hold for 2 seconds the Volume up
or down Button
Mute off : Tap the Volume up or down Button
2s
2s
2Hand strap
You can carry the headset with your phone
1) Hook on the cradle with the hand strap.
2) Tie to your phone with the hand strap.
The headset is supplied with a cradle, a hand
strap and a car holder. When you do not keep the
headset on your ear, you can carry it conveniently
using the Accessory.
1Cradle
1716
1) Place the headset into the cradle until it locks and you
can put it on your shirt.
2) To release the headset, push down release point and
take the headset out.
3Car Holder
1) Adhere the car holder to dashboard or proper place in your car.
2) Folding the earpiece and place the headset in the car holder.
Using Accessory
Push
18 19
Product Type
Bluetooth Version
Bluetooth Prole
Frequency Range
Dimension
Weight
Operating Range
Talking Time
Standby time
Charging
Battery
Charger Rated Input
Charger Rated Output
Bluetooth Mono Headset
Bluetooth 2.0
Headset & Hands-free prole
2402 ~ 2480 MHz
52 x 18 x 11 mm
9.8g
Up to 10meters (33feet)
Up to 5.5 hours(HV3 Packet)
Operating Temperature
-20°C ~ 55°C
Up to 100 hours
2 hour/full charging
Rechargeable Li-Polymer
AC100~240V, 50/60Hz
DC 5.0V / 700mA
Specication
※
Talk Time and Standby time are dependent on phone models.
4Changing faceplate
Two faceplates are provided.
As shown in the pictures, take the faceplate out and place
a faceplate.
Using Accessory
Indice
Altri manuali Wise & Blue Cuffia
