WisyCom PHA60 Manuale utente
PHANTOM POWER
ADAPTER
PHA
60
Wisycom Italy
Wisycom Srl - Via Tiepolo, 7/E I-35019 Tombolo (PD) Italy
Wisycom USA
5228 Eisenhower Avenue - Alexandria, Virginia 22304
PHA60-en-b01 - Subject to change without notice
PHA60 is an phantom power adapter for pole to connect
Wisycom wireless transmitter MTP60 to a wired microphone (ie a shotgun).
This adapter provides the stabilized voltage and a
high quality insulation transformer in a small form
factor suitable to be plugged directly on the MIC.
Item: CAL48S
Audio cable to connect MTP60 to
PHA60, 27 cm
LEMO 3pin to mini XLR 5pin Female
Item: CAMxx-2
Audio cable, mini XLR-3pin Female to
XLR-3pin Male
CAM50-2: 50 cm
CAM120-2: 120 cm
ACCESSORIES & RELATED
ACCESSORIES & RELATED
ACCESSORIES & RELATED
TECHNICAL SPECIFICATIONS
SPECIFICATIONSSPECIFICATIONS
Audio connector
mini XLR-5M
[1] GND
[2] AF-
[3] AF+
[4] VDC
[5] GND
mini XLR-3M
[1] GND
[2] Hot +
[3] Cold -
Pole diameter from 25 to 40 mm
Phantom power 41 ± 2V @ 5 mA
Power supply 3 Vdc
Weight 92 g
Dimensions
64,5 x 48 x 30 mm (HxWxD)
Thanks to the felt hook it allows a stable and
safe xing on poles from 25 to 40 mm.
Quick fastening system using
the MTP60 belt clip
48
25~40
30
64.5
PHANTOM POWER
ADAPTER
PHA
60
Wisycom Italy
Wisycom Srl - Via Tiepolo, 7/E I-35019 Tombolo (PD) Italy
Wisycom USA
5228 Eisenhower Avenue - Alexandria, Virginia 22304
PHA60-en-b01 - Subject to change without notice
2. pass the felt around the pole and secure it on the
other end
3. mount the MTP60 xing it with the clip as shown in
the gure
4. make sure it is stable and pull the felt harder if
necessary
5. connect the CAL48S cable from the LEMO con-
nector of the MTP60 to the TX connector (TA5)of the
PHA60
1. insert the felt on the rst spring and x the felt on
one side
6. connect the audio cable from the MIC connector
(TA3) of PHA60 to the microphone/shotgun
ACCESSORIES & RELATED
MOUNTING INSTRUCTION
Indice
Altri manuali WisyCom Adattatore
