Witura WT-1041 Manuale utente

T-

-1

User Manual

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

Your WT-1041 3G Camera is a smart monitor device, which is

used in 3G network. You can conveniently monitor your home or

any place via a simple SMS command. With the built in 1.3

million pixels camera, you can catch every wonderful time in

your life.

Multi share numbers setting (50 at most)

Password setting

Real-time monitor

Video recording

Photo taking (1.3 million pixels, 800 *600)

Infrared night mode

Audio record

Status report

Full memory note

Help

INTRODUCTION

FEATURES

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

1. Important Precaution…………………………………………………………………………………………………5

Precaution………………………………………………………………………………………………………………5

Battery and power transformer……………………………………………………………………………6

Use precaution………………………………………………………………………………………………………7

2. WT-1041 3G Camera…………………………………………………………………………………………………8

Front view………………………………………………………………………………………………………………8

Rear view………………………………………………………………………………………………………………9

Bottom view……………………………………………………………………………………………………………9

3. Talking first step………………………………………………………………………………………………………10

Install USIM card…………………………………………………………………………………………………10

Connect charger…………………………………………………………………………………………………12

Important tools……………………………………………………………………………………………………13

4. Getting started…………………………………………………………………………………………………………14

Host number setting……………………………………………………………………………………………14

Share number setting…………………………………………………………………………………………16

Password setting…………………………………………………………………………………………………17

Master reset………………………………………………………………………………………………………18

5. Main function……………………………………………………………………………………………………………19

Real time monitor………………………………………………………………………………………………19

Video recording……………………………………………………………………………………………………21

Photo taking…………………………………………………………………………………………………………23

Audio recording……………………………………………………………………………………………………25

Status report………………………………………………………………………………………………………27

Full memory note…………………………………………………………………………………………………27

Low power capacity……………………………………………………………………………………………28

Delete memory data…………………………………………………………………………………………28

Delete T card memory data…………………………………………………………………………………28

Delete card memory data……………………………………………………………………………………28

Get password………………………………………………………………………………………………………29

Help………………………………………………………………………………………………………………………29

Power off……………………………………………………………………………………………………………30

6. About T Card………………………………………………………………………………………………………………31

7. Trouble shooting………………………………………………………………………………………………………32

Wrong operation prompt……………………………………………………………………………………32

The network indicator light green and flash quickly……………………………………32

Message fail to feed back……………………………………………………………………………………33

The device can’t be powered on by pushing upward the powered switch………33

The device falls to the ground and is powered of automatically………………………34

8. Glossary……………………………………………………………………………………………………………………35

Maintenance state………………………………………………………………………………………………36

TABLE OF CONTENTS

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

Before using WT-1041 3G Camera, please read the following precaution first to avoid

shock, fire and device damage.

Do not use the product in damp place.

This device is a wireless communication application, pay attention to the place

where you use, don’t use when prohibited. Follow the entire safety usage guide

applied on wireless communication device; breaking the rules may be dangerous or

illegal.

This usage of the device may get interference with nearby medical equipment.

Follow any regulations and rules.

Please keep the product far away from the place with high temperature, such as

heater, heat exchanger or other equipment which may generates heat. The heat

not only will damage and age the product, but also cause low battery efficiency,

free and trouble.

Please plug the power wire into the home power socket. When you are abroad for

travel, please do not plug AC power transformer into the socket which is not the

same with the appointed voltage or frequency. Otherwise, it may cause device

damage.

Please do not detach, maintain or re-assemble the product, or it will cause fire,

shock and trouble.

Do not use the product on the unstable base. Please use the appointed accessories

based on the use guide.



Warning:

When you are in the place where it is susceptible to explode such as gas

station, fuel or chemical material warehouse, please power off the product.

1. IMPORTANT PRECAUTION

Precaution

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

WT-1041 3G Camera use the rechargeable battery. Every changing take about 2-

2.5 hour. When the operating time is noticeably shorter than normal, don’t attempt

to replace the battery, contact after sales service center for replacement. About

battery maintenance, Please refer to page 5 Maintenance Precaution and the State

in the last page.

Do not connect or disconnect AC power transformer with wet hands, or it will cause

shock.

When use AC power transformer, please do not place it on the wood surface(or

other surface which may be damaged by over heat). The surface temperature will

increase, so please place it on the heat-proof surface.

Do not place any stuff on the AC power transformer or near the heat source in the

course of use. Over heat will influence its performance.

Do not try to detach or maintain AC power transformer or modify the power cable

or socket, or it may cause shock.

Do not touch the liquid flowing from battery, which may cause damage to eye or

skin. If the liquid enters eyes, please wash with clean water and go to hospital at

once. If the liquid touches the skin or clothes, please wash with clean water at once.

Please wipe the camera with special wet or static-proof cloth. Please don’t use the

chemical or the corruptive material detergent, because it will cause damage to the

device.

Please note that the product can only be charged when power switch is on.

Battery And Power Transformer

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

Do not place the product before the light source to avoid over light-exposing.

Do not place any things within 1 meter before the product. (The shot video may be

unclear.)

Do not place the device in the area with poor signal.

Do not cover the device with any stuff on the product when the product works, it

may influence the video quality.

Do not cover any thing containing mental material on the product, because it may

influence the signal strength.

The product, battery and charger have no the parts which you can maintain yourself.

Please do not detach or maintain these parts, or it may cause fire, shock and trouble. If

the product has trouble or needs maintenance, please contact after- service center.

Use Precaution

Maintenance Precaution

2. 3G CAMERA

Front View

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

Your WT-1041 3G Camera is smart monitor device, which can only be used in 3G

networks and can be set by message. Suggest being store the commonly used SMS

command in your phone.

Before use, you must insert USIM card into WT-1041 3G Camera USIM card contains the

number you want to dial WT-1041 3G Camera

Real View

Bottom View

3. TALKING THE FIRST STEP

Install USIM Card

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

If you don’t insert USIM card, WT-1041 3G Camera will not work properly. At this

moment, the green light will flash quickly (one time per 0.5 second).

If you want to insert or pull out USIM card, please power off and disconnect the charger

first.

USIM socket is located on the bottom of the product. Please insert the USIM card as the

arrow shows. After insert the USIM card, please switch USIM card.

Insert the charger to the product as the following chart shows.



Note:

Before installing USIM card, please make sure that the power switch is set off.



Note:

Please make sure that your USIM card has been inserted correctly as the chart

shows.

Be careful when you insert USIM card, because the mental part of USIM card is

subject to scratch.

Connect Charger

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

When the product is powered on, it can detect that charger is inserted. At this time, the

battery indicator lights red.

If the battery indicator (red) flash quickly (per 0.5 second), it means that the power is

low. When the power is low to some extent, the product will be powered off

automatically. At this time, please plug in the charger and continue to use.

1. 3G mobile phone with a 3G SIM Card

2. WT-1041 3G Camera with a 3G SIM Card

3. Must have 3G network



Note:

Please do not pull the USIM card out when the charger is connected.



Note:

When the power is low, power connect the charger the charger in time.

To make sure that the product can be used for a long time; it is advised to plug in

the charger when you use the product.

The product can be only charged when power is set on.

Important Tools To Start:

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support: [email protected]

1) Insert a 3G SIM Card into the WT-1041 3G Camera

2) Connect to charger

3) Finding the network signal

>> Switch on the 3G cam

>> Firstly battery indicator lights red (2 sec per time) & network indicator lights

green (flash quickly 0.5 sec per time)

>> After find the network signal, green lights flash at 2 sec per time

4) Setting host number

Note : For first time use of 3G Camera, you must set your phone number as HOST

Number via message

: Host number can do any operation such as video call, password setting

: Original password is 888888

>> BATTERY INDICATOR: RED

a) Red Flash Quickly : Power Is Low

b) Flash Per 2 sec : Normal / Finish Charging

>> NETWORK INDICATOR: GREEN

a) Flash Per 2 sec : Normal

b) Flash quickly : No SIM Card/ SIM Card not insert properly

Note: Do not pull the SIM Card out when the charger is connected

When products is powered on, it can detect charger is inserted. At this

time Battery indicator is RED

Note: Before installing the SIM Card make sure that the power switch is set off.

4. GETTING STARTED

Host Number Setting

Indice

Altri manuali Witura Telecamera di sicurezza

Witura

Witura WT-1042 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente