Wizard ON-K800 Manuale utente
1
4K KEYFOB CAM
Mini Digital
Video Recorder
User Manual
WIFI CAM
3840*2160
2
Please read this user manual carefully before any
attempt to operate this product and keep it for
your future reference.
Features
* IMX 179 SONY 8.0MP sensor with WDR
* Frame rate up to 120fps
* Quickly video recording and photo shooting
* Wi-Fi Streaming Via IOS/ Android APP
* 4K UHD (3840*2160@25FPS)
2.7K@30FPS/1080P@60FPS;/1080P@30FPS/720P@120FPS/
720P@60FPS (optional)
* Photo Resolution
30M.20M.14M.10M.7M.5M.4M (optional)
* H.264 video compression format
* Maximum support 128GB memory card
* 900mAh built-in lithium battery, fully 50-90 minutes
power life time
* Working while charging , working 24/7
3
Details Image
Insert the memory card before using the camera
Note: Please use an original C10 high speed card, FAT 32GB
or above (including 32GB) memory card, please format the
memory card before using.
4
Charging Instructions
1. Please fully charge the camera before using .
2. Connect the USB cable provide to an external 5V
adapter , power bank or computer to the camera for
charging .
3. While the camera is charging , the camera will
automatically power on ,If you do not need to use the camera
while charging , please power off the camera , the red led
light keeps on .
4. When the camera is fully charged ,the red led light
turns off .
Note: When the device is low battery, the yellow led will
automatically turn off after flashing for several seconds.
Please charge the camera at this time;
Charging time is about 2-3 hours;
The camera supports working 24/7 while charging;
5
Power on / Power off the camera
1. To power on the camera , hold and press the “②”
button for 3 seconds. The yellow led light will indicate after
the camera vibrating.
2. To power off the camera , hold and press the “②”
button for 3 seconds. The camera will turn off after
vibrating .
Note:
If NO Memory Card is inserted , the yellow led will keep
flashing . Please insert a memory before operating .
If the inserted memory card does not be detected by the
camera,the yellow led will keep flashing.Please format the
inserted memory card and operate the camera with the
formatted memory card again.
If a defect memory card is inserted , the yellow led will
keep on and the camera does not operate normally .Now
please format the memory card and reset the camera .
6
Video Recording
1. Hold and press the “②” button for 3 seconds to
power on the camera . The yellow led light will indicate after
the camera vibrating.
2. Press the “③” button one time to start recording
after vibrating, recording is indicated with a flashing red led
light.
3. Press the “③” button one more time to stop
recording . The solid yellow led will return .
Note: The camera will continuously record 5 minutes long
sequences for video recording mode .
Photo Shooting
1. Hold and press the “②” button for 3 seconds to
power on the camera . The yellow led light will indicate after
the camera vibrating.
2. Press the “①” button one time, the camera will take
a photo after vibrating , and the red led flash once .
7
Turn on/off the indicator led light
1. Hold and press the “②” button for 3 seconds to
power on the camera . The yellow led light will indicate after
the camera vibrating.
2. Then hold the “①” button for 3 seconds , all
indicators turn off after vibrating.
3. Hold the “①” button for 3 seconds one time, all
indicators turn on after vibrating.
Note: The camera has memory function, after setting the
indicator on/off , even if cut off the power, we do not set it
again.( Once the indicator is turned off, the camera indicator
remain off when the camera is turn on again.)
8
APP Download
Please download the “ 4k cam ” app before using the camera
in wifi mode .
1. Scan the QR Code to download APP
2. Search the “ 4K Cam APP” name in APP store and
Play store to download the app.
4K Cam App
4K Cam
Download from App Store
( IOS)
Download from Play Store
( Android )
9
WIFI mode
1. Hold and press the“②” button for 3 seconds to power
on the camera . The yellow led light will indicate after the
camera vibrating.
2. Hold the “③” button for 3 seconds. The camera
change to WIFI mode after vibrating. At this time, the blue
indicator flashes slowly.
3. Then enter the phone setting where WIFI signal
inside, find out the camera WIFI hotspot and connect it . As
the photo showing below:
Camera WIFI Account:
WIFI_XXXXXX
Default Password:
1234567890
Note: Please modify the SSID
and password in time after
connecting the device to
ensure safe use.
10
4. Open the APP "4K CAM " to add connected device
Click: “WIFI Connect” to
add the camera into the app
device listing.
This APP can only add up to
3 cameras.
Note:
After connecting successful , the blue indicator with a solid
led.
In the wifi mode , only one camera can be connected to one
phone at a time
Indice
