Wizard ON-CAV6-3G Manuale utente
GPS Tracker User Manual
For Auto, scooter and motorcycle
Please read the manual carefully before use the GPS Tracker so that you can
install the device correctly and activate it quickly on the internet. The outlook
and true color are subject to the actual product.
1．Accessories：
2. Technical parameter
1）.GSM：850/900/1800/1900/Quad band
3G: optional
4G: optional
2）.GPRS: Class12, TCP/IP
3）.Working Voltage：9-24V DC
4）.Working current：≈22mA (12vDC)
5）.Working current：≈12mA (24vDC)
6）.GPS locating time：Cold start≈38s（Open sky）
Warm start≈32s
Hot start≈2s（Open sky）
7）.GPS Precision：10m（2D RM）
8）.Working temperature：-20℃～+70℃
9）.Working humidity：20%～80%RH
10）.Measurement：87（L）×43（W）×14（H）mm
4.Device status indicators
4.1Connect DC 9-24V power supply and the red LED will light continuously.
4.2The green LED glistens when searching the GPS signals. When GPS works, the
LED lights continuously.
4.3The intermediate blue LED (GSM signal state)
GSM signal is normal, blue LED light long bright. No GSM signal, the blue LED
flashes.
GPS LED not fixed, flashes（0.2 sec/2 sec）， Positioning long bright；
GSM LED no signal, flashes（0.2 sec/2 sec）， Signal normal long bright；
Power LED: long bright;
All LEDS will turn off after 5 minutes. When there is a new call, the LEDs will relight and
turn off 5 minutes later.
5.Installation
5.1 Preparation for the installation
5.1.1 Product Check. Open the packing box and check the device‘s model and accessories.
If the model is wrong or the accessories not complete, please contact the dealer.
5.1.2 Choose SIM card. Please insert a SIM card to the device. Please take dealer’s advice
as reference.
5.1.3 SIM card installation. Discharge the cover of the device and uncover the SIM card
holder. Then insert the SIM card and cover SIM card holder
5.1.4 Put back the front cover and screw it up.
5.1.5 Connect the device to the 9-24Vpower supply.（the red LED constant glow）
5.1.6 Install the device in the hidden place of the car；
The SIM card must be with GPRS function and enough deposit. If your SIM card need
input PIN when power on, please cancel it.
5.2 Installation
The GPS tracker must be installed under professional personnel.
Note：
1) Please install the device in the hidden place as followings：
Under Front windshield；
In the front instrument panel；
Under back windshield；
2) Avoid being placed with signal radiators like reverse sensor ；
3) The device has GSM antenna and GPS antenna inside. Please ensure the
receiving side of the device is face up and without metal cover.
Note：The metal cover will lessen the receiving of GPS signals.6. The device
connecting requirements.
6. Device wiring requirements
6.1 The device power supply is DC 9-24V. The red line is positive pole while the
black line is negative pole.
6.2 The negative pole of power supply connects with ground or the metals.
Please do not connect with other ground lines.
6.3 When finishing the power supply wire connection, please make the plug of
power supply to the device.
7.The Device Working
7.1 Power on: the device will be power on when connecting to the current. Then the three
LED indicators will light continuously. The device will upload the data to the
online platform (the default interval of uploading data is 10seconds). When the
car is in static state for a long time, the device will be in energy saving mode
and it will be more smart and precise.
7.2Power off：Pull off the power plug then power off the device.
8.User Settings
8.1 Set class instruction
1)CENTER
Text
command
Parameter
Sample
CENTER Add
710#number#
711#number#
710#13500135000#
711#13800138000#
CENTER Del
D01#
D02#
D01#
D02#
Command
Description
1)Center number can control the oil and power and
resume factory settings
2) Center number can receive the call and text of
vibration alarm and over speeding alarm.
3) SIM must display the income call number to control oil
and power.
4) Only one number can be center number.
5) Change center number must resend the command.
6)Add new center number by CETNER,A, and delete by
CENTER,D
Command
Feedback
Successful Setting：Add admin account 1 OK!
2) View administrator number
Text
command
Parameter
Sample
View
901#
901#
Command
Description
This directive is used to view Device Manager number.
Command
Feedback
Successful Setting：Admin1:
Admin2:
3)Authorized number set
Text
command
Parameter
Sample
Authorized
Add
101# number #
102# number #
103# number #
1：101#13800138000#
2：102#12345678912#
3：103#12345678912#
Authorized
Del
D11#
D12#
D13#
D11#
D12#
D13#
Command
Description
1) Authorization number for SMS control oil.
2) only three numbers to set the authorization number
3) change the authorization number needs to delete the
previous number
Command
Feedback
Successful Setting：Add Authorization account 1 OK!
4) View authorized number
Text
command
Parameter
Sample
View
authorized
C10#
C10#
Command
Description
This directive is used to view the equipment authorization
number
Command
Feedback
Successful Setting：
Authorization 1：
Authorization 2：
Authorization 3：
5)APN
Text
command
Parameter
Sample
APN Setting
802#username#pas
sword]
1：802#intenet#123#123#
Command
Description
APN differs according to the local telecom operators.
For example：APN request password ，please refer to
Sample1，and Sample2 for no password.
Command
Feedback
Successful Setting：SET APN OK！
6) Set / view SERVER
Text
command
Parameter
Sample
SERVER
Parameter
803#SERVER # port#
803#222.217.240.243#8011#
view
SERVER
CIP#
1）CIP#
Command
Description
Change the IP and port when move to a new server
port：10~65535
1 is domain and 0 is IP；
Command
Feedback
Successful Setting：set IP OK!
7)TIMER
Text
command
Parameter
Sample
TIMEER
Parameter
setting
730#uploading interval#
730#20#
Command
Description
Time scope：0，10~60 seconds；0,no data uploading；
10~60,means time interval ；the default value is 15
seconds！
Command
Feedback
Successful Setting：SET TIMER OK！
7) Alert on/off
Text
command
Parameter
Sample
Alert on Com
mand
911#
911#
Alert off co
mmand
910#
910#
Command
Description
This command is used to set the alert on/off, against unk
nown movement or shake.
Command
Feedback
Reply Set successfully
8)STATIC
Text
command
Parameter
Sample
STATIC
SUP# time interval#
SUP#5#
Command
Description
Time scope：1~60 minutes；The device has3Dtransmission
and the default time interval are 5 minutes.
Command
Feedback
Successful Setting：SET STATIC TIME OK！
9) Cancel the continuous upload
Text
command
Parameter
Sample
NUP
NUP#
NUP#
Command
Description
This command is used to cancel sending data to the
platform
If need again to restore the upload , you need to send
TIMEER Parameter setting or STATIC
Command
Feedback
SET OK！
10)RELAY
Text
command
Parameter
Sample
RELAYParame
ter1
222#
222# cut off oil and power
RELAYParame
ter2
333#
333# recover oil and power
Command
Description
1)RELAY control the start and closeness of the relay
2) Only the center number can operate.
3）the device only cut off the oil circuit on the condition
of the driving speed below 20KM/H or in static state.
4)When send the command, the device will reply “please
waiting “When the vehicle speed is over 20KM/H, the
device will cut off the oil or the power when the speed
below 20KM/H.
Command
Feedback
Successful Setting：Fuel cut has already been completed
OK!
11)GMT
Text
command
Parameter
Sample
GMT
801#location,
time#
801#E8#
Command
Description
The default time zone is Beijing time. If time zone need
revised, please operate according to the above command.
Command
Feedback
Successful Setting：Set time zone ok!
12)VIBRATION
Text command
Parameter
Sample
Indice
