Wlan BOX WB100A Manuale utente
IVoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
User Manual
WB100A
Table of Contents
1Preamble 1
1.1 Package Contents 1
2 Indicators and Connectors 1
2.1 LED Indicators 2
2.2 Hardware Installation 3
3. WB100A webpage settings 3
3.1 Login WEB page 3
3.1.1 URL format 4
3.1.2 About Passwords 4
3.2 WEB Page 4
4. Configure from web 5
4.1Status 5
4.1.1 System Information 6
4.1.2 System Log 8
4.2Network 8
4.2.1WAN 8
4.2.2LAN 13
4.2.3VPN 14
4.2.4 MAC Clone 14
4.2.5DMZ 15
4.2.6 DDNS 15
4.2.7 Advance 16
4.2.8 Port Setting 16
4.2.9MultiWAN 17
4.3Wireless 18
4.3.1Basic 18
4.3.2 Wireless Security Setting 20
4.3.3 Wi-Fi MultiMedia 22
4.3.4 Wi-Fi Protected Setup (WPS) 23
4.3.5 Station Info 24
4.3.6 Advance Wireless 25
4.4 SIP Account 26
4.4.1 Line 1 26
4.4.2 SIP setting 30
4.4.3VoIPQoS 31
4.5 Phone 31
4.5.1 Preferences 31
4.5.2 Dial Plan 34
IIVoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
4.5.3 Phonebook 36
4.5.4 Call Log 39
4.6 Diagnosis 40
4.7Administration 45
4.7.1 Management 41
4.7.2 Firmware Upgrade 44
4.7.3 Provision 44
4.7.4SNMP 46
4.7.5 TR069 47
5. Functions 48
5.1MakingCalls 48
5.2CallWaiting 48
5.3CallHold 48
5.4 Call Transferring 48
5.4.1 Blind Transfer 48
5.4.2 Attended Transfer 48
5.5 3-way conference call 49
5.6CallForwarding 49
5.7 Speed dialing 49
5.8 Daylight Saving Time 49
5.9 Upgrade Firmware 49
5.10 Password Control 50
5.11 System log 50
1VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
1. Preamble
Thank you for choosing WB100A VoIP home gateway products. WB100A home gateway is a
highly integrated access device, and it is a kind of high-end multi-in-one gateway product which
based on IEEE802.11n standard. This product is for individual users, SOHO (Small Office or
Home Office) and small enterprises to provide high-performance access. It provides a wide range
of management functions, can provide dhcp, dmz host, virtual servers, firewalls etc.
management;
also it is able to set up the internal LAN, allowing multiple computers to share a single broadband
line and ISP account; its specific firewall feature, can filter bad sites; also it supports disabling
SSID broadcast mode, user can prevent AP broadcast the SSID, which can solve the leaks
caused by SSID broadcast; WB100A supports WPA2 wireless dhome gateway encryption to
ensure the security of dhome gateway transmission in a wireless network; it supports DHCP
servers and dynamic/static routing; and it supports access control, the network administrator can
control all the computer in the LAN access to the Internet through a router; supports virtual server
and dmz host to meet specific application needs; it supports remote management and system
logs, which brings large convenience for the network administrator to realize network
management and real-time monitoring; and WB100A also supports UpNp, voice and video
transmission, online audio and video transmission, online games and other rich features.
1.1 Package Contents
One WB100A package contains:
One WB100A VoIP home gateway router
One power adapter
One Ethernet cable
One telephone line
If the above device or accessory is damaged or lost, please contact with your reseller for
replacement.
2. Indicators and Connectors
Before you use the high speed home gateway router WB100A, please get acquainted with the
LED indicators and connectors first.
2VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
2.1 LED Indicators
(1) The positive side panel
(2) The rear panel
3VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
(3) The left side panel
2.2 Hardware Installation
Before starting to configure the router, you have to connect your devices correctly.
Connect Line port to land line jack with a RJ-11 cable.
Connect the WAN port to a modem or switch or router or Internet with an RJ- 45 Ethernet
cable.
Connect one port of 4 LAN ports to your computer with a RJ-45 Ethernet cable. This
device allows you to connect 4 PCs directly.
Connect one end of the power cord to the power port of this device. Connect the other
end to the wall outlet of electricity.
Check the Power and WAN, LAN LEDs to assure network connections.
Warning: Please do not attempt to use other different power adapter or cut off power
supply during configuration or updating the WB100A VoIP home gateway router. Using
other power adapter may damage WB100A and will void the manufacturer warranty.
3. WB100A webpage settings
3.1 Login WEB page
WB100A has an embedded Web server that will respond to HTTP get/post requests. User can
use a Web browser like Microsoft's IE or Firefox to login and then configure WB100A.
4VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
3.1.1 URL format
User can login from device’s LAN ports, the default IP address of device’s LAN port is
192.168.1.1. After entering the default IP address the page will go to the device's login page, as
shown below:
3.1.2 About Passwords
WB100A has two login levels, namely administrator level and general user level, different
standards have different passwords.
General level user can browse and configure some parameters; and administrator level user can
configure all other parameters.
WB100A’s default administrator level username and password: admin/admin
WB100A’s default general user login username and password: user/user
3.2 WEB Page
Number Name Description
1 Navigation bar Click navigation bar, many sub-navigation bar will
appear in the place 2.
5VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
2 Sub-navigation bar Click sub-navigation bar to enter to configuration
webpage
3 Configuration title The configuration title
4 Configuration bars The configuration bars
5 Device Information Display the firmware version, DSP version, Current
Time, and login mode.
Press Logout button to logout.
6 Help Display the main information of configuration; user
can get help from it directly.
Every time making some changes, user should press the button to confirm and
save the changes.
After pressing the button, the red notice
will appear to notice user
to reboot.
To cancel the changes
Press it to reboot WB100A
4 .Configure from web
4.1 Status
On this page, users can view the WB100A system information and system log information. It is
the first page which user will see firstly after login to WEB.
6VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
4.1.1 System Information
On this page, user can view the product information of WB100A, SIP account status, network
status and system status.
7VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
8VoIPNetworkServicesGmbH,Justus‐von‐Liebig‐Str.26,31535Neustadt
4.1.2 System Log
In this configuration page, the user can view the system log, WB100A system recordings contain
important configuration information.
On this page, users can click the corresponding button to refresh, remove and save the relevant
system information.
4.2 Network
4.2.1 WAN
1. Static:
In static mode, user should fill in the values of IP Address, Subnet Mask, Default Gateway,
Primary DNS and Second DNS.
Indice
