WolfPack HDTVIPA100E Manuale utente
HDTV Supply's WolfPack
SDVoE 4K 60 HDR HDMI Over IP
HDTVIPA100E / HDTVIPA100D
All Rights Reserved
Version: HDTVIPA100E/ HDTVIPA100D_2020V1.4
User Manual
4K IP Streaming Extender
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version were updated till
March, 2020. In the constant effort to improve the product, we reserve the right to make
functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
4K IP Streaming Extender
SAFETY PRECAUTIONS
To ensure the best performance from the product, please read all instructions carefully
before using the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
4K IP Streaming Extender
Table of Contents
1. Product Introduction....................................................................................................1
1.1 About 10G Network ...........................................................................................1
1.2 Features ............................................................................................................2
1.3 Package List ......................................................................................................2
2. Specification ...............................................................................................................4
3. Panel Description........................................................................................................5
3.1 HDTVIPA100E Front Panel ...............................................................................5
3.2 HDTVIPA100E Rear Panel................................................................................5
3.3 HDTVIPA100D Front Panel ...............................................................................6
3.4 HDTVIPA100D Rear Panel................................................................................7
4. System Connection.....................................................................................................8
4.1 Usage Precaution ..............................................................................................8
4.2 Connection Type................................................................................................8
4.3 System Diagram ................................................................................................9
4.4 Hardware Setup...............................................................................................10
5. Operation of IPA Manager.........................................................................................12
5.1 General Information.........................................................................................12
5.2 Device Configuration .......................................................................................13
5.3 Start IPA Manager............................................................................................15
5.4 Video Routing Tab ...........................................................................................16
5.4.1 Video Switching .....................................................................................17
5.4.2 Sending Single Source to All RX Devices..............................................18
5.4.3 Stopping/Starting Video.........................................................................18
5.4.4 Disconnecting Source from RX..............................................................18
5.4.5 Preset Management ..............................................................................18
5.5 Video Wall Routing Tab....................................................................................20
5.5.1 Configuring a Video Wall .......................................................................21
5.5.2 Preset Management ..............................................................................21
5.5.3 Removing Receiver (RX) from Video Wall .............................................23
5.5.4 Changing Output Resolution for Video Wall Receivers..........................24
5.6 HDMI Audio Routing Tab .................................................................................25
4K IP Streaming Extender
5.7 Analog Audio Routing Tab................................................................................27
5.8 RS-232 Routing Tab ........................................................................................28
5.8.1 Assign Transmitter to all Receivers........................................................30
5.8.2 Sending RS-232 Data from IPA Manager to a Device ...........................30
5.9 Infrared Routing Tab ........................................................................................31
5.9.1 Assign Transmitter to all Receivers........................................................32
5.9.2 Sending IR Data from IPA Manager to a Device....................................32
5.10 Global Command Options and Settings ........................................................34
5.10.1 Receiver (RX) Settings Options...........................................................34
5.10.1.1. Analog Audio Output Settings...................................................34
5.10.1.2. HDMI Audio Output Settings.....................................................34
5.10.1.3. Display EDID ............................................................................35
5.10.1.4. Network Setting ........................................................................36
5.10.1.5. RS232 ......................................................................................37
5.10.2 Transmitter (TX) Settings Options .......................................................38
5.10.2.1. Input .........................................................................................38
5.10.2.2. Device EDID.............................................................................38
5.10.2.3. Network Setting ........................................................................39
5.10.2.4. RS232 ......................................................................................40
5.11 System Management Tab ..............................................................................41
5.11.1 Device Firmware Upgrade ...................................................................41
5.11.2 System Backup and Restore ...............................................................42
5.11.3 Security Settings..................................................................................43
5.11.4 System Logs ........................................................................................44
5.12 Routing Table.................................................................................................45
6. Operation of GUI Control ..........................................................................................48
7. Panel Drawing ..........................................................................................................50
8. Troubleshooting & Maintenance ...............................................................................51
9. Customer Service .....................................................................................................52
4K IP Streaming Extender
1
1. Product Introduction
The HDTVIPA100 is a network AV Transmitter/Receiver with HDMI and DP inputs up to
4K/60Hz/4:4:4, HDR. It is designed for HDMI/DP transmission over IP network with
external audio and control signals at distances up to 100m over copper cable. It works
with one control PC (Wake on LAN) and one 10GbE Switch to control a variety of
functions.
The HDTVIPA100 provides one of the most advanced IP Streaming solutions on the
market
utilizing AptoVision BlueRiver™ NT+ technology, which synergizes various IP/AV
standards to work together as one. It combines a variety of 4K IP technologies and
features under one unified protocol using a simplified topology.
The HDTVIPA100 features uncompressed video with zero-latency from transmitter to
receiver, seamless switching, Video wall, 1G Ethernet, IR, RS232, audio
embedding/de-embedding, audio down-mixing, etc. The control PC merge all functions
into Web-GUI, it means that user control system functions over multiple OS which
support browser anywhere in the same local area network.
Compares with traditional HDBaseT matrix AV Switching, HDTVIPA100 features low cost,
easy installation, more interoperability and flexibility. It is ideal for distributing AV over
10 Gigabit Ethernet in enterprises and other large-scale installations.
1.1 About 10G Network
Unlike traditional AV extension technology, such as HDBaseT, where transmitters and
receivers are connected point to point or joined together using custom matrix switches,
the IPA transmitter and receiver units are based on the inter compatible BlueRiver™
NT+ technology and connected using standard, off the shelf 10G Layer 2/3 network
switches.
This architecture makes use of data packages that can be easily and independently
routed to the desired unit. A variety of transmission modes is possible this way, from
one transmitter to one receiver (point to point) or one transmitter to many receivers
(point to multipoint) or many transmitters to many receivers (multipoint to multipoint)
with a software controllable video wall integration.
An added benefit of packet data transmission is that each signal type (video, audio,
RS232, etc.) is routed independently and not necessarily to the same destination. For
example, the HDMI video from a particular transmitter is routed to 4 receivers, while the
audio goes to all receivers in the setup.
This unlimitedly scalable and independent signal routing enables multiple, scalable
applications, including signal extension, splitting, switching, matrixing, and video wall
functionality.
4K IP Streaming Extender
2
1.2 Features
AptoVision BlueRiver™ NT+ technology. NT1000 chip is implemented in the
transmitter and NT2000 chip is implemented in the receiver.
Streams uncompressed video with zero-latency, audio, and control, with the
flexibility of transmitting them together or to separate network destinations.
Supports HDMI 2.0 and video resolution up to 4K@60Hz 4:4:4 8bit, 1080P 3D.
18Gbps high bandwidth and supports HDR 10 and Dolby Vision.
Automatically detect and switch HDMI and DP inputs.
Transmits and receive RS232 and IR to any units by using Unicast or Broadcast
IPV4 protocol or local control by API server.
IPA100 series are configurable HDCP 2.2 compliant from transmitter to receiver.
Allows a video source to be stretched across multiple displays.
Seamless switching between different transmitters with selectable output
resolutions up to 4K scaling ability.
Transmitter route HDMI audio, external audio as an independent streaming for
receiver embedding.
BlueRiver NT+ Series is compatible with SDVoE, offering zero-latency AV-over-IP
with true 4K/60 and video processing.
1.3 Package List
HDTVIPA100E:
1x HDTVIPA100E Transmitter (TX)
2x Mounting Ears with 6 Screws
4x Plastic Cushion
1x 3-pin Terminal Block
1x Power Adapter (12V DC 2A)
1x User Manual
4K IP Streaming Extender
3
HDTVIPA100D:
1x HDTVIPA100D Receiver (RX)
2x Mounting Ears with 6 Screws
4x Plastic Cushion
1x 3-pin Terminal Block
1x Power Adapter (12V DC 2A)
1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
4K IP Streaming Extender
4
2. Specification
HDTVIPA100E
Video Input
(1)HDMI, (1) DP
Video Input Connector
(1) Type-A female HDMI, (1) DisplayPort
HDMI Input Resolution
Up to 4Kx2K@60Hz 4:4:4 8bit
DP Input Resolution
Up to 4Kx2K@60Hz 4:4:4 8bit
Audio Input
(1) AUDIO
Audio Input Connector
(1) 3.5mm jack
Control
(1) 10G LAN, (1) IR IN, (1) IR OUT, (1) RS232,
(1) ETHERNET
Control Connector
(2)RJ45, (2) 3.5mm jack, (1) 3-pin terminal block
HDTVIPA100D
Video Output
(1) HDMI
Video Output Connector
(1) Type-A female HDMI
HDMI Output Resolution
Up to 4Kx2K@60Hz 4:4:4 8bit
Audio Output
(1) AUDIO
Audio Output Connector
(1) 3.5mm jack
Control
(1) 10G LAN, (1) IR IN, (1) IR OUT, (1) RS232,
(1) ETHERNET
Control Connector
(2) RJ45, (2) 3.5mm jack, (1) 3-pin terminal block
General
External Power Supply
Input: AC 100~240V, 50/60Hz, Output: 12V DC 2A
Power Consumption
TX:19W (Max);
RX:21W (Max)
Operation Temperature
-10℃ ~ +55℃
Storage Temperature
-25℃ ~ +70℃
Relative Humidity
10%-90%
Dimension (W*H*D)
224.0mm x 49.2mm x 110.0mm
Net Weight
TX:1.15KG; RX:1.18KG
4K IP Streaming Extender
5
3. Panel Description
3.1 IPA100E Front Panel
①POWER LED: The LED illuminates red when power is applied.
②LINK LED: The LED indicates if Ethernet packets are transmitted.
LED off: Packets are not transmitted
LED blinking: Packets are transmitted
③HDMI LED: The LED illuminates green when the HDMI video source is selected.
④DP LED: The LED illuminates green when the DP video source is selected.
3.2 HDTVIPA100E Rear Panel
①DC 12V: DC port for AC power adapter connection.
②DP IN: DisplayPort input port to connect DP video source device.
③HDMI IN: Type-A female HDMI port to connect HDMI video source device.
④10G LAN: RJ45 port to connect directly to the RX or a network switch using a
CATx cable.
LINK DPHDMI
1234
HDMI IN AUDIO IN
IR IN RS232
Tx Rx
IR OUTDC 12V ETHERNET
123456789
Questo manuale è adatto per i seguenti modelli
1
Indice
