If successful connection, it will enter the
edit page.
If it fails to connect, switch to another mode.
STEP 8
Comfirm the WiFi passward is correct
STEP 7
FAQs
1)Check whether it is plugged in and the indicator on the machine is green. When the feeder is
powered only by battery, the wifi function is unusable, so the connecting will be failed.
2) After long pressing the SET key of the machine, whether to wait for the green light to blink in
the selection mode for the next step.
3) Check if the wifi strength is strong enough and reset the router. The distance between the
feeder and the router should not be too far, within 10m is recommended.
4)Switch between AP mode and scan mode.
5)Re-download the app and register a new email account.
6)Are there LAN restrictions? (You can consult router manufacturers.)
1. Troubleshooting method of connection failure (default Bluetooth mode)
Press and hold the treat icon (in the middle of the screen) for 2 seconds to toss up a treat.
2.How to toss a treat in the app?
1) Check whether the treat size is 6-15mm and remove food debris in the food outlet.
2) Please try to manual feeding to check if the motor is turning properly, and clean all food out.
3.Does the device not toss treat or toss unevenly?
3
