WorkPro UNIDIM 1 Manuale utente
User Manual /Manual de Uso
Rev. 140801
UNIDIM 1
Este símbolo en su equipo o embalaje, indica que el presente producto
no puede ser tratado como residuos domésticos normales, sino que deben
entregarse en el correspondiente punto de recogida de equipos electrónicos
y eléctricos. Asegurándose de que este producto es desechado
correctamente, Ud. está ayudando a prevenir las consecuencias negativas
para el medio ambiente y la salud humana que podrían derivarse de la
incorrecta manipulación de este producto. EL reciclaje de materiales
ayuda a conservar las reservas naturales. Para recibir más información,
sobre el reciclaje de este producto, contacte con su ayuntamiento, su
punto de recogida más cercano o el distribuidor donde adquirió el producto.
UNI DIM
1 Channel Dimmer/Switch Pack
Dimmer/Switch Pack de 1 Canal
English Version Page 1
Versión Español Página 10
This symbol on the product or on its packaging indicates that this product
shall not be trated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical an electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling
of this product. The recycling of amterials will help to conserve natural
resources. For more detailed information sabout recycling of this product,
please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
Contents
Features 1
General Instructions 2
1. Overview 3
2. Operation Guide 5
Technical Specifications 9
1.1 Left Panel 3
1.2 Right Panel 4
2.1 DMX Address Mode 5
2.2 Dim/Switch Pack Mode 6
2.3 Dim Limit Mode 7
2.4 Dim Preset Mode 8
Features
Thank you for your purchase. This product features
include:
3-pin standard DMX IN/OUT ports providing dimmer information
Serves as a Switch Pack or Dimmer Pack, depending upon
the current operating mode.
Allows DMX Addressing, Dim Preset and Dim Limit.
Power failure memory.
4 digits Segment Display shows current activity and
function state.
Comply with HTP principle(Highest takes precedence).
User Manual / Manual Page/Página 1
General Instructions
Safe and Efficient Use
Product Care
To prevent fire or shock hazard, do not expose this product to
rain or moisture.
In the event of a malfunction(burning smell, etc.), immediately
stop operation, disconnect the power supply plug, and consult
authorized service personnel.
No user serviceable parts inside, always consult authorized
personnel for repairs.
Take care not to damage the power cord.
Do not make any inflammable liquids, water or metal objects
enter the unit.
This product must be earthed.
Do not dismantle or modify the unit.
Place this unit in a stable location.
Do not use the unit in places subject to excessive humidity,
vibration or bumps.
Unplug the power plug from the sockets when not using the
unit for extended period.
Provide occasional ventilation during use.
This product is intended for indoor use only.
Please read through this operating instructions before installing or using your new
product. After you have finished reading the instructions, put them away in a safe
place for future reference.
User Manual / Manual Page/Página 2
1. Overview
1.1 Left Panel
1
2
3
4
5
6
7
1. Segment LED Display: To show the current activity, correlative values and
function state.
2. DMX In:
3. DMX Out:
4. Local Dim(HTP): To adjust
5. External Remote Jack: For connecting the remote(Sold separately).
6. Menu Button: Press this button to scroll through the main menus. The main
menus include:
7. Up/Down Button:
3-pin XLR male socket, used to receive DMX data.
3-pin XLR female socket, used to send DMX data.
channel lighting intensity and comply with HTP
principle(Highest takes precedence).
Each tap will increase/decrease the value once. Pressing and
holding down will increase/decrease quickly. Or press Up/Down buttons to
change Dim/Switch.
User Manual / Manual Page/Página 3
11
10
9. Output: One Schuko socket for Output, 10A MAX.
10:Power In: AC 230V~50Hz, 10A MAX.
11:Fuse: F10A 250V 5x20mm
OUTPUT : 10A Max.OUTPUT : 10A Max.
FUSE:
F10A 250V
5x20mm.
FUSE:
F10A 250V
5x20mm.
POWER IN:
AC 230V~ 50Hz,10A Max.
POWER IN:
AC 230V~ 50Hz,10A Max.
User Manual / Manual Page/Página 4
1. Overview
1.2 Right Panel
9
2. Operation Guide
2.1 DMX Address Mode
1. The Segment Display shows the DMX address
of last change when powering this unit.
If you've selected DMX address 123 for the last
time, then the Segment Display will read 123.
General
Select the appropriate power resource and plug in. The rated voltage of UNI
DIM is only 230V. With the power failure memory function, this unit can recover
the last function state automatically. If the frequency of power is not stable, the
Segment Display will show "AC-0", please wait until the power is stable.
This unit serves as a dimmer pack or a switch pack, depending on operating
mode you've selected.
2. Each tap of the Up or Down button will change
the DMX address once. Pressing and holding
down will change the DMX address quickly.
Once the DMX address is selected, it will be
recorded into the unit automatically.
NOTE:
During DMX addressing, output is disabled.
Note:
MENU
DMX Address
Dim/Switch Dim Preset
Dim Limit
DMX
MENU
DMX Address
Dim/Switch Dim Preset
Dim Limit
DMX
User Manual / Manual Page/Página 5
2. Operation Guide
2.2 Dim/Switch Pack Mode
1. When the desired DMX addresses are complete,
you can enter the next mode by pressing Menu
button. The segment display will show " d--- ", it
means the Dim Pack Mode is activated now.
2. You can change Dim/Switch Mode by tapping the
Up or Down button. And the segment display will
show "S---", it means the Switch Pack Mode is
activated now.
3. Press Menu button to confirm and enter Switch
Pack Mode consisting of Switch On(S-on) and
Switch Off(S-of).
In the Switch On Mode, output is turned on and
the fixture lights regardless of DMX signal.
MENU
DMX Address
Dim/Switch Dim Preset
Dim Limit
---
MENU
DMX Address
Dim/Switch Dim Preset
Dim Limit
DMX
---
MENU
DMX Address
Dim/Switch Dim Preset
Dim Limit
LOCAL DIM
(HTP)
LOCAL DIM
(HTP)
MaxMax
MinMin
In the Switch Off Mode, output is turned off and
the fixture is controlled by DMX signal. When DMX
level is less than 40%, the fixture goes out; when
DMX level exceeds 40%, the fixture lights. You can
adjust the level by adjusting the Local Dim Knob.
User Manual / Manual Page/Página 6
DMX
DMX
2. Operation Guide
2.2 Dim/Switch Pack Mode
4. Tap the Up or Down button to change between
Switch On and Switch Off.
5. Once the Dim/Switch Pack is complete, press
Menu button to return to DMX Address Mode.
MENU
DMX Address
Dim/Switch Dim Preset
Dim Limit
DMX
MENU
DMX Address
Dim/Switch Dim Preset
Dim Limit
DMX
2.3 Dim Limit Mode
1. Press Menu button to enter the next mode. the
Segment Display will show "L-10", it means the
Dim Limit Mode is activated now.
In the Dim Limit Mode, output is turned on and
the fixture lights regardless of DMX signal.
2. Tap the Up or Down button to change the value
within the range of 10%-100%. Each tap will
change the value once, pressing and holding down
will change the value quickly.
Once the Dim Limit Mode is selected, it will be
recorded into the unit automatically.
MENU
DMX Address
Dim/Switch Dim Preset
DMX Limit
DMX
MENU
DMX Address
Dim/Switch Dim Preset
Dim Limit
DMX
User Manual / Manual Page/Página 7
Indice
Lingue:
Altri manuali WorkPro Dimmer
