Wortmann terra LCD/LED 1910W Manuale utente
Operation Instructions
Thank you for purchasing this monitor, a high-resolution multi-scan color monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This monitor generates,
uses, and can radiate radio frequency energy. Harmful interference to radio
communication may be led as a result if it‘s not properly installed and used. However,
there is no guarantee that interference will not occur in a particular installation. If this
monitor does cause serious interference to radio or television reception, resetting the
monitor may determine it. Moreover, users are encouraged to correct interference by doing
one or more of the following:
Reorient or relocate the receiving antenna.
Move the monitor and the receiver further away from each other.
Connect the monitor into an outlet on a circuit different from that to which the receiver
is connected.
Consult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord
and the provided shielded video interface cable with bonded ferrite cores. Also, any
unauthorized changes or modifications to this monitor would void the user‘s authority to
operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet
the emission level limits.
English
English
Contents
Safety Precautions .............................................................................1
First Setup ..........................................................................................2
Quick Installation ................................................................................2
Front View of the Product...................................................................3
Rear View of the Product....................................................................3
Using On Screen Display (OSD) Functions........................................ 4
Supporting Timing Modes ..................................................................7
Technical Information..........................................................................8
Care and Maintenance .......................................................................9
Troubleshooting..................................................................................9
English
1
Safety Precautions
This monitor is manufactured and tested on a ground principle that a
user’s safety comes rst. However, improper use or installation may result
danger to the monitor as well as to the user. Carefully go over the following
WARNINGS before installation and keep this guide handy.
WARNINGS:
This monitor should be operated only at the correct power sources
indicated on the label on the rear end of the monitor. If you’re unsure of
the power supply in your residence, consult your local dealer or power
company.
Do not try to repair the monitor yourself as it contains no user-
serviceable parts. The monitor should only be repaired by a qualied
technician.
Do not remove the monitor cabinet. There is high-voltage parts inside
that may cause electric shock to human bodies, even when the power
cord is disconnected .
Stop using the monitor if the cabinet is damaged. Have it checked by a
service technician.
Put your monitor only in a clean, dry environment. Unplug the monitor
immediately if gets wet and consult your service technician.
Always unplug the monitor before cleaning it. Clean the cabinet with a
clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not
directly onto the glass screen.
Keep the monitor away from magnetic objects, motors, TV sets, and
transformer.
Do not place heavy objects on the cable or power cord.
For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed
near the equipment and shall be easily accessible.
English
2
First Setup
Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories :
Power cable Audio cable
D-Sub cable (15 pin) User’s guide
Quick Installation
1. Connect power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
2. Connect Analog video cable (D-Sub cable)
Make sure both monitor and computer are powered OFF. Connect the video
cable (D-Sub cable) to the computer, then to the monitor.
3. Connect audio cable
Connect the audio cable from audio output of computer to the audio input of
the monitor.
4. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
5. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)
Resolution Right-click on the Windows desktop > Properties > Settings >
“Desktop Area”. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.
Example:
Warranty Card
English
3
Front View of the Product
OSD Menu On/Off CONFIRM SELECTION OSD
SCROLL DOWN/DECREASE POWER ON/OFF
SCROLL UP/INCREASE LED INDICATOR
Rear View of the Product
POWER INPUT VGA INPUT (D-SUB 15 PIN)
AUDIO INPUT
English
4
Using On Screen Display (OSD) Functions
Display main menu.
Exit from OSD menu.
Auto adjust the image when not in OSD menu.
Conrm the selection.
▲
Select the desired item when in OSD menu.
▼Select the desired item when in OSD menu.
When not in OSD menu,directly enters Contrast/Brightness/DCR.
▼ + ▲ Recall both of Contrast and Brightness.
+ ▼ Power Lock (when not in OSD menu)
+ ▲ OSD Lock (when not in OSD menu)
Main Menu
1
2
1
1
English
5
Short Cuts Function from the button(s)
Auto Image Adjust : To auto adjust Horizontal Position, Vertical Position,
Phase (Fine Tune) and Clock (H. Size) of the screen.
Contrast : To adjust the foreground white level of screen image.
▲: increase contrast, ▼: decrease contrast.
Brightness :: To adjust the luminance of the video.
▲: increase brightness, ▼:decrease brightness.
DCR : To turn On or Off the DCR function (dynamic contrast ratio)
Audio Adjust : To adjust the audio functions.
Volume : To adjust the volume of speaker output.
Color Adjust : To select the color for improving brightness and color
saturation between Cool, Normal,Warm, and User Color.
Cool : Adds blue to screen image for cooler white.
Normal : Adds red to screen image for warmer white and richer red.
Warm : Adds green to screen image for a darker color.
User Color : Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ▼or ▲button to adjust selected color.
Information : To display the information, regarding the current input signal
coming from the graphic card in your computer.
Note: See your graphic card user guide for more information about
changing the resolution and refresh rate.
Horizontal Size : To adjust the width of the screen image.
▼: decrease the width of screen image, ▲:increase the width of screen image.
H./V. Position : To adjust the horizontal and vertical position of the video.
H. Position : ▲: move screen to the right, ▼: move screen to the left.
V. Position : ▲: move screen up, ▼: move screen down.
English
6
Fine Tune : To adjust the delay time of data and clock.
Press ▲or ▼to adjust to your preference.
Sharpness : To adjust the clarity of a non-WXSGA+ (1366x768) signal
with ▼or ▲button.
Aspect Ratio: To select 4:3/16:9 image size.
Setup Menu : To set up Language Select, OSD Position, OSD Time Out,
and OSD Background.
Language Select : To allow users to choose from available languages.
OSD Position : Press button ▲ or ▼ to select between horizontal and
vertical OSD Position adjustment.
H. Position : To horizontally adjust the OSD position.
▲: move OSD to the right, ▼: move OSD to the left.
V. Position : To vertically adjust the OSD position.
▲: move OSD up, ▼: move OSD down.
OSD Time Out : To automatically turn off On Screen Display(OSD)after a
preset period of time.
OSD Background : Allows the user to turn the OSD background On or
Off.
Memory Recall : To recall factory settings for Video controls.
Press button 2 to select the Memory Recall menu option.
?
English
7
Supporting Timing Modes
Warning : Do not set the graphic card in your computer to exceed these
maximum refresh rates. Doing so may result in permanent damage to your
monitor.
Note: Simultaneously press 1 and 2 keys on monitor panel to switch between
similar PC timings.Similar PC Timing on list below:·
640 x 400 @ 70Hz / 720 x 400 @ 70Hz
640 x 350 @ 70Hz / 720 x 350 @ 70Hz
VESA 720 x 400 @ 70Hz
VESA 640 x 480 @ 60Hz
MAC 640 x 480 @ 67Hz
VESA 640 x 480 @ 75Hz
VESA 800 x 600 @ 56Hz
VESA 800 x 600 @ 60Hz
VESA 800 x 600 @ 72Hz
VESA 800 x 600 @ 75Hz
MAC 832 x 624 @ 75Hz
VESA 1024 x 768 @ 60Hz
VESA 1024 x 768 @ 70Hz
VESA 1024 x 768 @ 75Hz
VESA 1280 x 800@ 60Hz
VESA 1280 x 1024@ 60Hz
VESA 1280 x 1024@ 75Hz
VESA 1360 x 768@ 60Hz
VESA 1366 x 768@ 60Hz
Indice
Altri manuali Wortmann Monitor
Wortmann
Wortmann terra LCD/LED 2463W PV Manuale utente
Wortmann
Wortmann TERRA LED 2764W Manuale utente
Wortmann
Wortmann 3030071 Manuale utente
Wortmann
Wortmann Terra LCD 2463W PV Manuale utente
Wortmann
Wortmann Terra LCD 2311W PV Manuale utente
Wortmann
Wortmann Terra 2256W PV Manuale utente
Wortmann
Wortmann Terra 2775W PV Manuale utente
Wortmann
Wortmann TERRA LED 2747W Manuale utente
Wortmann
Wortmann terra LCD/LED 2763W Manuale utente
Wortmann
Wortmann terra LED 2766W PV Manuale utente
Wortmann
Wortmann Terra 2456W PV Manuale utente
Wortmann
Wortmann Terra 2464W Manuale utente
Wortmann
Wortmann Terra 2435W HA Manuale utente
Wortmann
Wortmann terra 2447W Manuale utente
Wortmann
Wortmann terra LCD 2756W Manuale utente
Wortmann
Wortmann terra LCD/LED 2227W HA Manuale utente
Wortmann
Wortmann Terra 2226W PV Manuale utente
Wortmann
Wortmann terra LCD 4217 Manuale utente
Wortmann
Wortmann Terra 3290W Manuale utente
Wortmann
Wortmann Terra 2227W Manuale utente
