Worx WG116 Manuale utente

4 AMP Electric Grass Trimmer/Edger EN
Taille-bordure/Coupe-bordure électrique de 4 AMP F
Recortadora/Bordeadora eléctrica de 4 AMP ES
P07
P12
P17
W G116

1 2
7
4
6 5
3

2
1
2
3
1
1
2
2
1
2
1
2
3
O N
G2 H
I J
K L
M N
E1 E2
F G1
A B
C D

2
1
2
3
1
1
2
2
1
2
1
2
3
O N
G2 H
I J
K L
M N
E1 E2
F G1
A B
C D

2
1
2
3
1
1
2
2
1
2
1
2
3
O N
G2 H
I J
K L
M N
E1 E2
F G1
A B
C D

4 AMP Electric Grass Trimmer/Edger EN
7
1. AUXILIARY HANDLE
2. ON/OFF SWITCH
3. EXTENSION CORD RETAINER
4. SAFETY GUARD
5. CUTTING HEAD ASSEMBLY
6. FLOWER GUARD
7. LINE CUTTER
TECHNICAL DATA
Voltage 120V~60Hz
Rated current 4A
No load speed 9000/min
Cutting diameter 12”
Line diameter 0.065”
Line Length 2x16’
Machine weight 5.3 lbs
Protection class /II
ACCESSORIES
Safety guard 1
Flower guard 1
Auxiliary Handle 1
Spool (WA0007) 1
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.

4 AMP Electric Grass Trimmer/Edger EN
8
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: When using electric
gardening appliances, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
personal injury, including the following:
WARNING: Read all instructions
WARNING: This product maybe
contains lead, phthalate or other
chemicals known to the State of
California to cause cancer, birth defects
and other reproductive harm. Please
wash your hands after use.
1. FOR ALL DOUBLE- INSULATED
APPLIANCES
a) Replacement parts. When servicing
use only identical replacement parts.
b) Polarized appliance connections.
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other) and will require
the use of a polarized extension cord.
The appliance plug will fit into a polarized
extension cord only one way. If the plug
does not fit fully into the extension cord,
reverse the plug. If the plug still does not
fit, obtain a correct polarized extension
cord. A polarized extension cord will
require the use of a polarized wall outlet.
This plug will fit into the polarized wall
outlet only one way. If the plug does not
fit fully into the wall outlet, reverse the
plug. If the plug still does not fit, contact
a qualified electrician to install the proper
wall outlet. Do not change the equipment
plug, extension cord receptacle, or
extension cord plug in any way.
SAVE THESE INSTRUCTIONS
2. FOR ALL APPLIANCES
a) Avoid dangerous environment. Don’t
use appliances in damp or wet locations.
b) Don’t use in rain.
c) Keep children away. All visitors should
be kept at a distance from work area.
d) Dress properly. Do not wear loose
clothing or jewelry.They can be caught
in moving parts. Use of protective
gloves and substantial footwear is
recommended when working outdoors.
Wear protective hair covering to contain
long hair.
e) Use safety glasses. Always use face or
dust mask if operation is dusty.
f) Use right appliance. Do not use
appliance for any job except that for
which it is intended.
g) Ground Fault Circuit Interrupter
(GFCI) protection should be
provided on the circuit(s) or
outlet(s) to be used for the
gardening appliance. Receptacles are
available having built-in GFCI protection
and may be used for an added measure
of safety.
h) WARNING! To reduce the risk of
electric shock, use only with an
extension cord intended for outdoor use,
such as an extension cord of cord type
SW-A, SOW-A, STW-A, STOW-A, SJW-A,
SJOW-A, SJTW-A. or SJTOW-A.
i) Extension cord! Make sure your
extension cord is in good condition.
When using an extension cord, be
sure to use one heavy enough to carry
the current your product will draw. An
undersized extension cord will cause a
drop in line voltage resulting in loss of
power and overheating.Table 1 shows
the correct size to use depending on cord
length and nameplate ampere rating. If
in doubt, use the next heavier gage.The
smaller the gage number, the heavier the
cord.To reduce the risk of disconnection
of appliance cord from the extension
cord during operating:
i) Make a knot as shown in Figure 1
ii) Use one of the plug-receptacle
retaining straps or connectors
described in this manual.
j) Avoid unintentional starting. Don’t
carry plugged-in appliance with finger
on switch. Be sure switch is off when
plugging in.
k) Don’t abuse cord. Never carry
appliance by cord or yank it to

4 AMP Electric Grass Trimmer/Edger EN
9
disconnect from receptacle. Keep cord
from heat, oil, and sharp edges.
l) Don’t grasp the exposed cutting
blades or cutting edges when
picking up or holding the appliance.
m) Don’t force appliance. It will do the job
better and with less risk of injury at the
rate for which it was designed.
n) Don’t overreach. Keep proper footing
and balance at all times.
o) Stay alert. Watch what you are doing.
Use common sense. Do not operate
appliance when you are tired.
p) Disconnect appliance. Disconnect
the appliance from the power supply
when not in use, before servicing, when
changing accessories such as blades, and
the like.
q) Store idle appliances indoors. When
not in use, appliances should be stored
indoors in dry, and high or locked-up
place, out of reach of children.
r) Maintain appliance with care.
Keep cutting edge sharp and clean for
best performance and to reduce the
risk of injury. Follow instructions for
lubricating and changing accessories.
Inspect appliance cord periodically,
and if damaged, have it repaired by
an authorized service facility. Inspect
extension cords periodically and replace
if damaged. Keep handles dry, clean, and
free from oil and grease.
s) Check damaged parts. Before further
use of the appliance, a guard or other
part that is damaged should be carefully
checked to determine that it will operate
properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, breakage
of parts, mounting, and any other
condition that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service center unless
indicated elsewhere in this manual.
SAVE THESE INSTRUCTIONS
Table 1
Minimum gauge for extension cords
Volts Total length of cord in feet
120V 25 50 100 150
240V 50 100 200 300
Ampere rating
more than not
more than
AWG
0-6 18 16 16 14
6-10 18 16 14 12
10-12 16 16 14 12
12-16 14 12
Not
recommended
Figure 1
Method of securing extension cord
CORD
SET
APPLIANCE CORD
(A) TIE CORD AS
SHOWN
(B) CONNECT PLUG
AND RECEPTACLE
ADDITIONAL SAFETY RULES
FOR LAWN TRIMMER AND
EDGE TRIMMER
1.
Keep guards in place and in working order.
2. Do not use this product without the guard
being fitted.
3. Keep hands and feet away from cutting
area.
4. Do not use heavier lines than
recommended in this manual.
5. Do not use line materials of other types
– for example, metal wire, rope, and the
like.
SAVE THESE INSTRUCTIONS

4 AMP Electric Grass Trimmer/Edger EN
10
ASSEMBLY & OPERATION
Action Figure
AssemblingThe Main Handle See Fig. A
AssemblingThe Safety Guard See Fig. B
AssemblingThe Flower Guard See Fig. C
AssemblingThe Auxiliary
Handle See Fig. D
Attaching the extension cord See Fig. E1, E2
Trimming See Fig. F
Edging
See Fig. G1, G2
Manually FeedingThe Line See Fig. H
Replacing theTrimmer Line
And Spool See Fig. I
,
J
,
K
Manually Winding the Line See Fig. L
,
M
,
N
,
O
1. AUTOMATIC LINE FEED SYSTEM
When initially switching on the trimmer, a
small length of line is fed out.
A ‘clattering’ noise will be heard for a short
time. This is normal and is caused by the line
being cut by the line cutter. Once the line is
cut to the correct length, the ‘clattering’ noise
will stop and the trimmer motor will run at full
speed.
To feed more line, stop the trimmer
completely, then restart, allowing the motor to
reach full speed. Repeat this until you hear the
‘clattering’ noise of the line cutting.
2. MANUALLY WINDING THE LINE
(See Fig. L, M, N, O)
Take approximately 16ft (5m) line and insert
5/8” (15mm) of line into one of the holes in the
upper section of the spool (See Fig. L). Wind
the line in the direction of the arrows on the
top of the spool (See Fig. M).
Leave approximately 4” (100mm) of line
unwound and place it into the cleat. Repeat on
the lower section of spool.
Care should be taken to ensure that the line is
neatly coiled on the spool (See Fig. N). Failure
to do so will impair the efficiency of the
automatic line feed.
SYMBOLES
Warning
Read the manual
Wear eye protection
Wear ear protection
To avoid possibility of electric
shock, do not use in damp or wet
conditions
Keep all other people, including
children, pets and bystanders
outside the 15 meters hazard zone,
stop the trimmer immediately if you
are approached.
Before any work on the machine
itself, pull the power plug from the
outlet.
Double insulation
Trimming
Edging

4 AMP Electric Grass Trimmer/Edger EN
11
Then fit the spool as described above in
“Replacing the Trimmer Line And Spool”.
MAINTENANCE
After use, disconnect the machine from the
mains and check for damage.Your power
tool requires no additional lubrication or
maintenance.There are no user serviceable
parts in your power tool. Mains powered
trimmers should only be repaired by an
authorised repairer use only manufacturers
recommended replacement parts and
accessories.
Never use water or chemical cleaners to
clean your power tool. Wipe clean with a
dry cloth. Always store your power tool in a
dry place out of the reach of children. Keep
the motor ventilation slots clean. Keep all
working controls free of dust. If you see some
sparks flashing in the ventilation slots, this is
normal and will not damage your power tool.
Indice
Lingue:
Altri manuali Worx Tagliabordi

Worx
Worx WG154 Manuale utente

Worx
Worx WG286E Manuale di installazione

Worx
Worx WG268 Manuale utente

Worx
Worx WG284E Manuale utente

Worx
Worx WG160 Manuale utente

Worx
Worx WG209E Manuale utente

Worx
Worx WG151E Manuale utente

Worx
Worx WG163E Manuale utente

Worx
Worx WP280E Manuale utente

Worx
Worx WG103 Manuale utente

Worx
Worx WG186E Manuale utente

Worx
Worx WG284E Manuale utente

Worx
Worx WG205E Manuale utente

Worx
Worx WG166 Manuale utente

Worx
Worx WG284 Manuale utente

Worx
Worx WG112 Manuale utente

Worx
Worx WG169E Manuale utente

Worx
Worx WG255E Manuale di installazione

Worx
Worx WG213E Manuale utente

Worx
Worx WA0220 Manuale utente





















