Woxcon MUH44E-H2 KIT Manuale utente
MUH44E-H2 KIT
4K 4x4 HDBaseT Matrix with 3 Receivers
All Rights Reserved
Version: MUH44E-H2 KIT_2019V1.1
User Manual
4K 4x4 HDBaseT Matrix with 3 Receivers
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version were updated till
September, 2019. In the constant effort to improve the product, we reserve the right to
make functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever measures
may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
4K 4x4 HDBaseT Matrix with 3 Receivers
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment
l Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
l Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prevent f i r e o r shock hazard, do not e x p o s e t h e u n i t to rain, moi s t u r e o r install
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module
immediately.
l Do not twist or pull by force ends of the cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
4K 4x4 HDBaseT Matrix with 3 Receivers
Table of Contents
1. Product Introduction .................................................................................................... 1
1.1 Features ............................................................................................................. 1
1.2 Package List ....................................................................................................... 2
2. Specification ................................................................................................................ 3
2.1 MUH44E-H2 HDBaseT Matrix ............................................................................ 3
2.2 TPUH-BYE20R HDBaseT Receiver ................................................................... 4
3. Panel Description ........................................................................................................ 5
3.1 Matrix Front Panel .............................................................................................. 5
3.2 Matrix Rear Panel ............................................................................................... 5
3.3 Receiver Front and Rear Panel .......................................................................... 6
4. System Connection ..................................................................................................... 7
4.1 Usage Precaution ............................................................................................... 7
4.2 System Diagram ................................................................................................. 7
5. Panel Control ............................................................................................................... 8
5.1 Signal Switching ................................................................................................. 8
5.2 EDID Setting ....................................................................................................... 8
6. IR Control .................................................................................................................... 9
6.1 IR Remote Control .............................................................................................. 9
6.2 IR Pass-through Control ................................................................................... 10
6.2.1 Control Far-end Device locally ............................................................... 10
6.2.2 Control Local Device Remotely .............................................................. 10
7. GUI Control ................................................................................................................ 13
7.1 Switching Tab ................................................................................................... 14
7.2 Audio Tab .......................................................................................................... 15
7.3 Configuration Tab ............................................................................................. 16
7.3.1 PoC Setting ............................................................................................ 16
7.3.2 EDID Copy ............................................................................................. 16
7.3.3 EDID Setting .......................................................................................... 17
7.4 RS232 Tab ........................................................................................................ 18
7.5 Access Tab ....................................................................................................... 19
4K 4x4 HDBaseT Matrix with 3 Receivers
7.6 Interface Tab ..................................................................................................... 20
7.7 Network Tab ...................................................................................................... 21
7.8 GUI Upgrade .................................................................................................... 22
8. RS232 Control ........................................................................................................... 23
8.1 RS232 Control Software ................................................................................... 23
8.2 RS232 Communication Command ................................................................... 25
8.2.1 Device Control ........................................................................................ 25
8.2.2 Source Switching ................................................................................... 26
8.2.3 Preset Setting ......................................................................................... 26
8.2.4 Audio Control .......................................................................................... 27
8.2.5 EDID Management ................................................................................. 27
8.2.6 HDCP Management ............................................................................... 30
8.2.7 Third-party Device Control ..................................................................... 31
9. Panel Drawing ........................................................................................................... 32
10. Troubleshooting and Maintenance .......................................................................... 33
11. Customer Service .................................................................................................... 35
4K 4x4 HDBaseT Matrix with 3 Receivers
1
1. Product Introduction
Thanks for choosing this 4K 4x4 HDBaseT Matrix with 3 Receivers! It features 4 HDMI
inputs, 1 HDMI output with audio breakout and 3 HDBaseT outputs. The de-embedded
audio can be output from SPDIF and L/R connector. It supports video resolutions up to
4K@60Hz 4:4:4 and can transmit 4K video to distances up to 131 feet (40 meters) and
1080P video to distances up to 229 feet (70 meters) over a single CATx cable. It
supports bidirectional IR extension and IR, RS232, and TCP/IP control options. It
supports the Power over Cable (PoC) feature, allowing the receivers to draw their
power from the matrix over the CATx cable. In addition, there is the smart built-in EDID
setting can be selected by the 4-pin DIP switch on the rear panel.
1.1 Features
l Supports HDMI resolutions up to 4K@60Hz 4:4:4, including 1080P 3D video
l Fully compliant with the HDMI 2.0 and HDCP 2.2 specifications
l Can transmit 4K signals to distances up to 131 feet (40 meters) and 1080P signals to
distances up to 229 feet (70 meters) over a single CATx cable.
l Features three HDBaseT outputs and includes three receivers.
l Supports the 24V PoC feature, allowing the receivers to draw their power from the
matrix over the CATx cable.
l Includes a local HDMI output with corresponding digital optical S/PDIF and stereo
L/R analog outputs.
l Smart EDID management for various application and customized setting.
l Controllable via RS232, IR and TCP/IP.
4K 4x4 HDBaseT Matrix with 3 Receivers
2
1.2 Package List
HDBaseT Matrix
l 1x MUH44E-H2 4K 4x4 HDBaseT Matrix
l 2x Mounting Ears with 6 Screws
l 4x Plastic Cushions
l 1x IR Remote
l 4x IR Receivers
l 4x IR Emitters
l 1x RS232 Cable (3-pin to DB9)
l 1x 5-pin Terminal Bl o c k
l 1x Power Adaptor (24V DC 2.71A)
l 1x Power Cord
HDBaseT
Receiver
l 3x TPUH-BYE20R HDBaseT Receivers
l 6x Mounting Ears with 6 Screws
l 1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
4K 4x4 HDBaseT Matrix with 3 Receivers
3
2. Specification
2.1 MUH44E-H2 HDBaseT Matrix
Video
Video Input
(4) HDMI
Video Input Connector
(4) Type-A female HDMI
Video input Video Resolution
Up to 4K@60Hz 4:4:4
Video Output
(3) HDBaseT, (1) HDMI
Video Output Connector
(3) RJ45, (1) Type-A Female HDMI,
Video output Video Resolution
HDMI: Up to 4K@60Hz 4:4:4
HDBaseT: Up to 4K@60Hz 4:4:4
HDMI Version
Up to 2.0
HDCP Version
Up to 2.2
HDMI Audio Signal
LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital®
Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through.
Audio
Audio Output
(1) SPDIF, (1) L/R
Audio Output Connector
(1) Tos li nk c on ne ct or s, (1) 5-pin terminal blocks
Frequency Response
20Hz – 20kHz, ±3dB
Max Output Level
2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV)
nominal consumer line level signal
THD+N
< 0.05% (-80dB), 20Hz – 20kHz bandwidth, 1kHz sine at 0dBFS level
(or max level)
SNR
> 80dB, 20Hz - 20kHz bandwidth
Crosstalk Isolation
> 70dB, 10kHz sine at 0dBFS level (or max level before clipping)
L-R Level Deviation
< 0.3dB, 1kHz sine at 0dBFS level (or max level before clipping)
Frequency Response Deviation
< ± 0.5dB 20Hz - 20kHz
Output Load Capability
1KΩ and higher (Supports 10x paralleled 10KΩ loads)
Stereo Channel Separation
>70dB@1kHz
Control
Control Port
(1) FIRMWARE, (3) IR IN, (1) IR EYE, (4) IR OUT, (1) TCP/IP,
(1) RS232, (1) EDID
Control Connector
(1) Micro-USB, (8) 3.5mm jacks, (1) RJ45, (1) 3-pin terminal block,
(1) 4-pin DIP switch
General
Transmission Standard
HDBaseT
Transmission Distance
1080P@60Hz ≤ 230 feet (70 meters),
4K 4x4 HDBaseT Matrix with 3 Receivers
4
4K@60Hz ≤ 131 feet (40 meters)
Bandwidth
18Gbps
Operation Temperature
-5~ +55℃
Storage Temperature
-25 ~ +70℃
Relative Humidity
10%-90%
External Power Supply
Input: AC 100~240V, 50/60Hz; Output: 24V DC 2.71A
Maximum Power Consumption
58watts
Dimension (W*H*D)
436.4mm x 44mm x 236.5mm
Net Weight
1.9KG
2.2 TPUH-BYE20R HDBaseT Receiver
Receiver
Input
(1) HDBT
Input Connector
(1) RJ45
Output
(1) HDMI
Output Connector
(1) Female type-A HDMI
Control
(1) IR IN, (1) IR OUT
Control Connector
(2) 3.5mm mini jacks
General
Video Resolution
Up to 4K@60Hz 4:4:4
Transmission Mode
HDBaseT
Transmission Distance
1080P@60Hz ≤ 230 feet (70 meters),
4K@60Hz ≤ 131 feet (40 meters)
HDMI Version
Up to 2.0
HDCP Version
Up to 2.2
Bandwidth
18Gbps
Power Consumption
9.5W (Max)
Operating Temperature
-5℃ ~ +55℃
Storage Temperature
-25℃ ~ +70℃
Relative Humidity
10%-90%
Power Supply
Input Power: 24V DC 1.25A or Power over Cable (PoC)，
AC Adaptor Input Power: 100~240VAC, 50/60Hz
Dimension (W*H*D)
74mm x 18mm x 120mm
Net Weight (g)
235g
4K 4x4 HDBaseT Matrix with 3 Receivers
5
3. Panel Description
3.1 Matrix Front Panel
①
FIRMWARE: Micro-USB port for firmware upgrade.
②
Power LED: The LED illuminates red when power is applied.
③
Signal Switching Zone:
A. INPUT LEDs: A series of four LEDs, one of which illuminates blue to indicate
which source is selected.
B. OUTPUT button: Press the button repeatedly to cycle through the four video
inputs.
④
PRESET RECALL:
l Press and hold the button 1~3 to save the current switching status to the
corresponding preset 1~3.
l Press the button 1~3 to recall the saved preset 1~3.
3.2 Matrix Rear Panel
①
INPUTS: Four type-A female HDMI ports to connect the HDMI source devices
(Blu-ray Disc™ or DVD players, gaming consoles, etc.).
②
IR IN: Three 3.5mm jacks to connect the IR receivers for IR pass-through.
③
IR EYE: 3.5mm jack to connect the IR receiver for IR local control.
④
IR OUT: Four 3.5mm jacks to connect the IR emitters for IR pass-through.
12 3 4
AB
4
123567
Indice
Altri manuali Woxcon Commutatore a matrice
Woxcon
Woxcon MUH88-H2 Manuale utente
Woxcon
Woxcon NPG-MX44E-H2 KIT Manuale utente
Woxcon
Woxcon MMX1616-N Manuale utente
Woxcon
Woxcon VLHDMIMAT4X4 Manuale utente
Woxcon
Woxcon NPG-MX44-H2 Manuale utente
Woxcon
Woxcon NPG-MX88E-H2 KIT Manuale utente
Woxcon
Woxcon MUH44A-H2 Manuale utente
Woxcon
Woxcon MUH44T-H2 Manuale utente
Woxcon
Woxcon MUH44T-H2 Manuale utente
Woxcon
Woxcon MUH88A-H2 Manuale utente
