Wren V5PF Manuale utente
V5PF Setup Guide
2
Box Contents
Power Supply
Wren V5PF Speaker
Mini USB
Charging Cable
Micro USB
Charging Cable
Wren V5PF
Setup Guide
V5PF Setup Guide
Wren V5 Safety
Instructions & Warranty
AC Power Cord
English
3
Please check that the following are true:
• Your Android smartphone or tablet is compatible.
(For more information on compatible devices,
visit wrensound.com/compatibility)
• Your WiFi access point or router broadcasts at 802.11g or 802.11n.
(An 802.11b only router may be used, but it will stream to only one Play-Fi device.)
• You know your wireless network (WiFi) name and password.
• Your wireless network is on and functioning properly.
• Your Wren V5PF speaker is located in an area with ample WiFi signal strength.
Before You Begin Setup
PLEASE NOTE: A comprehensive user manual is available for download from
wrensound.com/support. It is not included with your Wren V5PF.
4
Powering On Your Wren V5PF
Press power button.
The power indicator will blink
white until the system is ready.
When the system is ready, the
power indicator will remain white.
solid white
Connect AC power cord
to power supply.
Connect power supply to AC outlet.
Connect power supply to power
input on rear of speaker.
The power indicator in the center of the
power button will flash white for about
10 seconds, then turn off.
English
5
Connections
Setup Button
Used to enter various setup modes
3.5mm Aux Input
Connects any audio source to your
Wren V5PF via a 3.5mm audio cable
Power Supply Input
Connects to the power supply
USB Charging Port
Charges most smartphones
and tablets
6
Download and install the free
Wren Play-Fi App (search for
“Play-Fi”) from the Google Play Store
or the Amazon App Store.
Turn on your speaker(s). The first
time you turn on the Wren V5PF, it
will start up in WiFi Connect Mode
(indicated by the WiFi indicator
blinking amber). In this mode, the
speaker is broadcasting a signal
telling Android devices that it is
ready to connect.
amber
Standard WiFi Setup enables you to set up multiple Wren V5PF speakers at once.
For best results, place your Wren V5PF speaker(s) near your router. You may move the
speaker(s) after setup is complete.
Standard WiFi setup using an Android
smartphone or tablet
Connect to your network — Option A
Connect your Android phone or
tablet to the same WiFi network that
you want to use to stream music to
your Wren V5PF speaker(s).
English
7
Problem connecting? Visit wrensound.com/support for additional help.
The Wren Play-Fi App will ask you to
enter your WiFi network’s password
(if required).
After connecting, your Wren V5PF
may perform a software update.
This may take several minutes.
During the update, do not unplug
your speaker, turn off your Android
device or leave the network.
Launch the Wren Play-Fi App.
It will automatically detect any
Wren V5PF speakers that are in
WiFi Connect Mode.
Steps 7-8, Next Page
8
To listen to music, simply use the
Wren Play-Fi App on your Android
device to select the music you
want to play.
The Wren Play-Fi App will ask you
to name your speaker. Choose from
preselected names or create your
own by choosing “Custom Name”
at the end of the name list.
Connect to your network — Option A (cont.)
To move your speaker to a
different location, power it off,
move it to where you want to
listen, and power it back on.
English
9
Setting Up Wren V5PF Speakers
After Launching the App
The Wren Play-Fi App looks for devices
in Standard WiFi Setup Mode when it is
launched. If you launch the app before
connecting the speaker to the WiFi network,
go to the app’s home screen, select
“Settings” and then “Add Play-Fi Device.”
Selecting a Different WiFi Network
If you want to connect the speaker to a
different WiFi network, open the Wren
Play-Fi app and press the “Alternative
Network” button on the “Enter Network
Password” screen.
blinking
amber
Manually Enabling WiFi Mode
You may need to manually enable the
speaker’s WiFi Setup Mode if any of the
following conditions apply:
• If this is not your first time setting
up the speaker
• If you’re in a new location with
a different WiFi network
• If you want to switch from your current
WiFi network to a different one
To manually enable WiFi Setup Mode, hold
down the setup button on the rear of the
speaker for eight (8) seconds. The WiFi
light will blink once per second indicating
that WiFi Setup Mode is active.
10
Press the setup button on the rear
of the product two times. The WiFi
indicator will blink amber two times,
then pause every second. The speaker
is now in WPS Mode.
Plug in the Wren V5PF speaker near
your router. Wait approximately
20 seconds for the speaker to fully
power on (when the power indicator
light stops blinking).
WiFi Protected Setup (WPS) is a feature on some WiFi routers that allows the Wren V5PF
speaker to automatically and securely connect without needing to enter a password. WPS is
not a standard feature on all routers, and only one Wren V5PF speaker can be set up at a time.
Check your router’s owner manual to see if WPS is a feature, or look for a button on your
router marked with the WPS logo . If your router does not have WPS, then use Standard
WiFi Setup. (See “Option A” in the prior section.)
If your router has WPS, you can follow the WPS instructions in the Wren Play-Fi App, or use
the following instructions.
WiFi Protected Setup (WPS)
Connect to your network — Option B
solid white blinking
amber
Altri manuali per V5PF
2
Indice
Lingue:
Altri manuali Wren Impianto stereo
