Wulian ZigBee WL-DWS-DP Manuale utente
Wireless Drawer Lock User Manual
1
Copyright notation
©2011 Nanjing IOT Sensor Technology Co., Ltd All Rights Reserved.
Wulian, are the trademarks and registered trademarks of
Nanjing IOT Sensor Technology Co., Ltd. The other products mentioned
in this article or company names may be the trademark or trade name of
their respective owners.
Before installing and using the products, please read user manual
carefully, which will help you use the products better.
The pictures in the manual are just for your information. If some
pictures are different from material object, the material object is final.
The content in the manual is protected by copyright law legislator. It
strictly prohibits any forms of copying, passing, distributing and storing
any content of the manual without prior, written, consent of the
instructor of Nanjing IOT Sensor Technology Co., Ltd.
When using, if the practical situation of the product is different from
that in the manual, or if you want to get more information, or you have
any questions or ideas, please contact us as below:
Service telephone: +86-25-5226 9091
Service website: http://www.wulian.cc/english/
Wireless Drawer Lock User Manual
2
Ⅰ. Product Introduction
WL-DWS-DP Wireless Drawer Lock is a dedicated lock for drawer,
which is based on ZigBee standard design. Its main body and affiliate
part are installed on the drawer and desk respectively. Once the drawer
is opened illegally, it can
send out alarm signal to
your mobile phone.
Meanwhile, once the drawer
is opened, information can
be saved automatically on
IOT clouds. It has great
significance for source
tracing and tracking etc.
WL-DWS-DP Wireless Drawer Lock features simple installation,
lower power consumption etc. It doesn’t need any wiring. With the
latest electricity saving technology, it can work normally for almost 2
years just by CR14250 3V security battery.
Ⅱ.Features
Support ZigBee HA protocol
ZigBee device type: Terminal
Wireless communication and easy installation
Compact size and good hidden ability
Long lasting power supply and energy protection
Wireless Drawer Lock User Manual
3
Ⅲ. Function illustration
Main body
Base of the main body
Main body of the
magnetic part
Base of the magnetic part
Wireless Drawer Lock User Manual
4
Ⅳ.Installation Steps
1. Separate the【Base of the main body】and【Base of the magnetic part】
from the corresponding main body part as the picture showing;
2. Open the side battery cover of the【main body】, load one CR14250 3V
security battery, then close it;
Wireless Drawer Lock User Manual
5
3. Fix the【Base of the main body】at a proper position of the drawer;
4. Same as above, fix the【Base of the magnetic part】at a proper position of
the desk;
(Please ensure bottom edge is on the same level)
Bottom Edge
Bottom Edge
Wireless Drawer Lock User Manual
6
5. Aim the【Main body】and【Main body of the magnetic part】to
their corresponding groove of the base and fold them;
Main body
Magnetic part
Wireless Drawer Lock User Manual
7
6. Installation complete.
Main body
Main body of the
magnetic part
Drawer
Desk body
Wireless Drawer Lock User Manual
8
Ⅴ.Application Method
1. Network Connection Setup
(1) The product should match up with WL-GW-A Wireless Gateway;
(2) Quick click【Multi-function key】four times(Interval time of each time
should be within 1 second) to join ZigBee network;
After joining the network,
green LED light will be constant on 2 seconds, then goes out
Wireless Drawer Lock User Manual
9
(3) After succeed in joining ZigBee network, device sends ENROLL
request to CIE settings in network;
(Note: The function is optional)
(4) Long pressing【Multi-function button】10 seconds to restore to the
factory settings.
(Restoring to the factory settings as defaults of non-joining ZigBee network)
Enroll success,
red LED indicator light flickers 3 times quickly
Green LED light flickers 4 times continuously
