X-Driven DRS1100 Manuale utente
UbONE
X-Driven
2
Main Functions
Accident Image Storage
When an accident occurs, this device automatically detects it through an impact
sensor and records and saves images before and after accidents.
Manual Image Storage
Even without physical impact to a vehicle from an accident, the device records and
saves images by a driver manually pushing the Emergency Button.
Location Information Storage
The device records and stores detailed GPS information including the location,
time, and speed of the time of accident.
Vehicle Operation Information Storage
The device records and stores certain vehicle motions including sudden accelera-
tion, braking and sharp turns, as well as back and forth, right and left and up and
down vibrations.
Accident Data Replay
In addition to accident data replay on PCs, it also simultaneously plays the GPS in-
formation and vehicle operation information. A software program is also provided
that is simple and easy to use in setting various functions including user-oriented
separate storage, printing, and screen shots.
UbONE
X-Driven 3
Components
Camera
Video Resolution
Audio Recording
GPS
G-Sensor
Data Storage
Events
Power Supply
1.3 Mega Pixel CMOS
Internal Microphone
Internal GPS Module
Internal 3D G-sensor (Collision ,Q-break, Q-accel detection)
SD Card (Min 512MB, Max 2GB)
Emergency button, Shock (Collision, Q-break, Q-accel detection)
DC 12V~24V
MPEG-4, 320X240(QVGA), 640X480(VGA) upto 30ips,
1280X960(MEGA) upto 5ips
Specification
≫Please check if the followings components are included in your package.
If any item is missing or an incorrect item is included, please contact the
store where you purchased the product.
DRS1100 Camera Rack
(Glass Attaching Type)
Power Cable
SD Memory Card Cable Holder Suction Cup (Option)
DRS 1100 Specification
UbONE
X-Driven
4
Name of the Parts
Camera lens
Please clean the camera lens before
use to avoid foreign matters block-
ing the lens.
SD Memory Card Slot
After inserting a SD memory card
into the slot, connect the power
cable.
Power Terminal
When power terminal is connected,
the power is automatically turned on.
Recording LED(Red)
Recording LED blinks while imaging
data is being saved, and after
recording, the LED is constant and
does not blink
GPS LED(Blue)
When GPS normally receives the
satellite data, GPS LED is lighted on. Emergency Button
Emergency Button is for manual
image recording, and when
the button is pressed, it records images.
Installation Instructions
Before attaching the camera to the rack, insert a SD
memory card into the appropriate slot and close the cover
as shown in the pictures on the left. When the power
cable is connected without a memory card inserted, the
device will not turn on, and it may cause serious errors
and damage to the product, so please check the card is
inserted before connecting the device to the power. Also,
when a memory card is ejected with the power on, the
power goes off automatically but it may cause serious
damage to the data.
In order to protect data turn the power off before eject-
ing the card.
In order to eject the SD memory card open the SD
memory card cover and press the card with a finger and
the SD memory card will be promptly ejected.
* Note
Please use only the SD memory card enclosed with
the product. Using other SD memory cards may cause
malfunctions.
Please do not pull out the SD memory card with finger-
nails or tweezers. It may cause damage to the product.
As shown in the pictures on the left, after
completely inserting the toggle into a hole in the
middle of the body of the camera, tightly fasten it
by pushing it upward.
On a spot that does not block a driver’s vision,
attach the base of the toggle with double-sided
tape to the windshield. While the body is fixed into
the toggle, it should be able to be turned left and
right. Adjust the camera angle to have the camera
lens face forward.
Installing the device to the windshield of a vehicle
⇒
⇒
◀Checking left and right▶
UbONE
X-Driven 5
UbONE
X-Driven
6
Installation Instructions
* Note
When a radio antenna is a glass-attaching type, it should
be attached with a distance from the GPS part as an
antenna can affect the GPS reception.
While pressing both left and right buttons on the side of
the body, rotate the camera lens to adjust its angle. The
line on the button should be set to a horizontal position
and be parallel to the road surface so that the camera lens
faces the front center of the windshield.
Insert the power cable into the power terminal on
the camera body, and ensure you use the power
cable enclosed in the product package.
After connecting the power cable into the cigarette
lighter jack of the vehicle, turn the ignition, and the
device will also turn on. Please check if the REC and
GPS LED are lighted on.
Horizontal
Horizontal
When GPS receiver is in the horizontal
position, reception rate is better.
* Note
After the initial operation begins, do not turn off the power for 2 – 3 minutes until
a continuous beeping sound is heard. This indicates that the SD card is formatted
and the PC installation program is being copied. If the power is turned off during
this operation, it may cause a malfunction. In this case, please contact the manu-
facturer or the store where you purchased the product.
Initial GPS reception time may vary depending on location.
Installing the device to the windshield of a vehicle
Program Installation
Double-click X-driven_In-
staller.exe in the folder of SD
memory card
- For a PC that does not
support SD memory cards,
a separate USB adapter is
required.
Select a folder to inatall the
program and click the middle
button.
Click OK after the installation
is completed
Click on the X-Driven icon under “All Programs” or on
Desktop to start the program.
- The program can be accessed through our company’s
website at www.ubone.co.kr.
On the homepage, go to Customer Support and S/W
Download to install the program in your computer.
Our company always provides the updated S/W in real
time.
UbONE
X-Driven 7
UbONE
X-Driven
8
How to Use the Program
When you start the program, you will see this initial
screen.
Click on a selected file from the file list and the
image of the file is shown in the preview window in
the right-hand lower pane.
After connecting the memory card to PC, click
on to select the file named “_System.mdb”
under the Data folder of SD memory card and bring
out the data.
When the file is opened, the screen shows a list of
files (with date, time, and event information) on
the right-hand upper pane. (Please note that when
an image is recorded inside a moving vehicle with
poor GPS reception, the recorded time may be
inaccurate.)
Double-click the selected file, and the image is
shown in the main window.
After selecting several files while pressing the Shift
key, click on on the right-hand upper side
to see the selected images as a slide show.
How to Use the Program
As shown in the image on the left, the Map is
shown in a small window to display the location of
the vehicle.
(PC users should have access to the Internet to use
this Map function. Also, while recording image in a
moving vehicle and GPS reception is poor, this Map
may not be shown.)
The graph below the main window shows the
degree of front and back, left and right, and up
and down impacts when an event occurs.
Front-Back movement: X-axis
Left-Right movement: Y-axis
Up-Down movement: Z-axis
Click on above the
GPS map to know the
exact location information.
You can also move within
the map and zoom in or
zoom out of the screen.
Click on to close the GPS-related information
window.
Move up
Move left or right
Move down
Zoom in
Zoom out
UbONE
X-Driven 9
UbONE
X-Driven
10
How to Use the Program
End the Program
Hide the Window
Fast Reverse Play
Reverse Play
Print
Go to the Last Page
Fast Play
Play
Volume Control
Play Speed Control
FunctionButtonFunctionButton
* Note
When the speed of play is not set as a default, the audio is not played.
The blue section in the slider bar indicates the recorded image before the occur-
rence of an event, while the red section indicates the recorded image after the
occurrence of an event.
How to Change the Setting
Press the Setting icon to open the file
named “_systems.cfg” under the
folder of SD memory card.
A user can change the default values of the X-Driven Viewer.
(When SD memory card is formatted, the settings are changed to default.)
Go to the First
Image
Pause after Reverse-
Playing One Image
Pause after playing
one image
Altri manuali per DRS1100
1
Indice
