X-Micro XWL-11GPAR Manuale utente

WLAN 11g PCMCIA Card

WLAN 11g PCI Card

User Manual

ver 1.0

INFORMATION TO USER

Product Name: X-Micro WLAN 11g PCMCIA Card

X-Micro WLAN 11g PCI Card

Model Name : XWL-11GPAR

XWL-11GCAR

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the

radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

The equipment has been tested and found to comply with the limits for a Class B Digital Device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction, may cause harmful interference to radio communication.

However, there is no grantee that interference will not occur in a particular installation. If this

equipment dose cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

--Consult the dealer or an experienced radio/TV technician for help.

Notice: The Part 15 radio device operates on a non-interference basis with other devices

operating at this frequency. Any changes or modification not expressly approved by the party

responsible could void the user’s authority to operate the device.

REGULATORY INFORMATION

X-Micro 11g WLAN PCMCIA Card and X-Micro 11g WLAN PCI Adapter must be installed and

used in strict accordance with the manufacturer’s instructions. This device complies with the

following radio frequency and safety standards.

USA - Federal Communications Commission (FCC)

This device complies with Part 15 of FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference that may cause undesired operation.

Europe-R&TTEDirective

This device complies with the specifications listed below

• ETS 300-826 General EMC requirements for Radio equipment.

• ETS 300-328 Technical requirements for Radio equipment.

• EN60950 Safety Requirements for Radio equipment

The channel identifiers, channel center frequencies, and regulatory domains of each

22-MHz-wide channel are shown in following Table.

MAX. OUT POWER

COUNTRY CHANNELS INDOOR OUTDOOR

Spain 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

France 2400-2454 MHz 1-8 < 100 mW EIRP < 100 mW EIRP

France 2454-2483.5 MHz 9-13 < 100 mW EIRP < 10 mW EIRP

Italy 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

UK 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Netherlands 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Germany 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Austria 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Belgium 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Switzerland 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Luxemburg 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Russia 2400-2483.5 MHz 1-13 <10 mW EIRP <10 mW EIRP

Ireland 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Portugal 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Norway 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Denmark 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Finland 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Iceland 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Greece 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Lichtenstein 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

Sweden 2400-2483.5 MHz 1-13 < 100 mW EIRP < 100 mW EIRP

publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the

prior written permission of X-Micro Technology Corp.

Disclaimer

X-Micro Technology Corp. makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any warranties,

merchantability or fitness for any particular purpose. Any software described in this

manual is sold or licensed "as is". Should the programs prove defective following their

purchase, the buyer (and not this company, its distributor, or its dealer) assumes the

entire cost of all necessary servicing, repair, and any incidental or consequential

damages resulting from any defect in the software. Further, X-Micro Technology Corp.,

reserves the right to revise this publication and to make changes from time to time in the

contents hereof without obligation to notify any person of such revision or change.

All brand and product names mentioned in this manual are trademarks and/or

registered trademarks of their respective holders.

TABLE OF CONTENT

Introduction............................................................................................6

Purpose...............................................................................................6

Terms/Usage.......................................................................................6

Overview of this User’s Guide.............................................................6

Unpacking and Setup ............................................................................7

Unpacking............................................................................................7

Setup...................................................................................................7

Hardware Installation.............................................................................8

LED Indicator.......................................................................................8

Check the installation ..........................................................................8

Software Installation ..............................................................................9

Windows 98se/ME/2000/XP Utility and Driver Installation ..................9

Wireless Utility Setting.......................................................................11

Technical Specifications ......................................................................22

INTRODUCTION

Congratulations on your purchase of this 108Mbps IEEE 802.11g Wireless

PCMCIA /PCI Adapter.

This manual helps to get familiar with the Wireless PCMCIA /PCI Adapter.

This manual contains detailed instructions in operation of this product. Please

keep this manual for future reference.

With a Wireless (IEEE 802.11g) PCMCIA /PCI Adapter, a laptop computer or

a station can communicate with another computer in a wireless way.

Easy-to-use utilities are bundled with Wireless PCMCIA /PCI Adapter for

configuration, monitoring, and diagnosis purposes.

Wireless PCMCIA /PCI Adapter can wirelessly transmit and receive data,

minimizing the need for wired connections, at a speed of up to fifty-four

megabit per second. With Wireless PCMCIA /PCI Adapter, you can locate

your Notebook PC or station wherever you want without wires and cables.

Wireless PCMCIA /PCI Adapter provides users with an access to real-time

information anywhere in their organization. The mobility provides productivity

and service, which are not available under wired networks. The Wireless

PCMCIA /PCI Adapter configuration is easy to change from peer-to-peer

networks, suitable for a small number of users, to full infrastructure networks

of thousands of users that allow roaming around a broad area.

Purpose

This guide discusses how to install your 108M 802.11g Wireless LAN

PCMCIA /PCI Adapter.

Terms/Usage

In this guide, the term “the WLAN PCMCIA /PCI Adapter” refers to your 108M

802.11g Wireless LAN PCMCIA /PCI Adapter.

Overview of this User’s Guide

Introduction. Describes the WLAN PCMCIA /PCI Adapter

Unpacking and Setup. Helps you get started with the basic installation of the

WLAN PCMCIA /PCI Adapter.

Hardware Installation. Describes the LED indicators of the Adapter.

Software Installation. Tells how to setup the driver and the utility setting.

Technical Specifications. Lists the technical (general, physical and

environmental) specifications of the WLAN PCMCIA /PCI Adapter.

UNPACKING AND SETUP

This chapter provides unpacking and setup information for the Wireless

PCMCIA /PCI Adapter.

Unpacking

Open the box of the Wireless PCMCIA /PCI Adapter and carefully unpack

it. The box should contain the following items:

One 108Mbps IEEE 802.11g Wireless PCMCIA /PCI Adapter

One Driver & Utility with User’s Guide CD-ROM

If any item is found missing or damaged, please contact your local

reseller for replacement.

Setup

The setup of the Wireless PCMCIA /PCI Adapter can be performed using

the following steps:

Visually inspect the PCMCIA /PCI Adapter and make sure that it is

fully plugged in to the CardBus slot / PCI slot.

Make sure that there is a well environment that there is no much

intrusion to have a better connection.

HARDWARE INSTALLATION

LED Indicator

Power (PWR)

The PWR indicator lights green while the Wireless PCMCIA /PCI Adapter

is connecting to the CardBus /PCMCIA or PCI slot, otherwise, it is off.

ACT (Activity)

The ACT indicator blinks green when the Wireless PCMCIA /PCI Adapter

is connected to a network successfully and transmitting data. Otherwise

the indicator is off whiles the Wireless LAN is stand by.

Check the installation

The LEDs of the Wireless PCMCIA /PCI Adapter are clearly visible and

the status of the network link can be seen instantly:

1. Once the device is plugged to the station’s CardBus/PCMCIA or PCI

slot, the PWR LED of the Wireless PCMCIA /PCI Adapter will light up

indicating a normal status.

2. When the device plugged to the station’s CardBus/PCMCIA or PCI

slot and the driver was installed, the ACT and PWR LED will start

alternate blinking, it means that the device is starting to scan the

wireless devices near the Wireless PCMCIA /PCI Adapter.

3. While the Wireless PCMCIA /PCI Adapter linked up and transmitting

data to the Access Point or to other Wireless LAN station, the ACT

LED will start blinking.

SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the Wireless

PCMCIA /PCI Adapter.

Windows 98se/ME/2000/XP Utility and Driver Installation

1. Insert the Wireless PCMCIA /PCI Adapter Driver & Utility CD-ROM into

computer’s CD-ROM Drive and it will automatically run a setup menu and

install the driver and the utility. In some specific setting on Windows

system, you may need to proceed the software manually, go to your

Windows Start menu and choose Run, type “D:\Utility\Setup.exe” in the

dialog box (D:\ will depend on where your CD-ROM drive is located) and

click OK.

2. If you need to install the driver manually, refer each Windows OS to the

following CD-Rom directory path: D:\Driver\<Windows OS>\net5211.inf.

Note: (D:\ will depends on where the CD-ROM drive is located and

<Windows OS> will depend on the Windows OS you are using).

3. The Install Shield Wizard screen will appear. Click “Next” to

continue.

4. The installation program will help you to setup the Wireless PCMCIA

/PCI Adapter utility.

Be noted that the Windows XP have its own Wireless Utility;

you can either use the utility of Windows XP or the provided

utility.

5. After finish the installation, plugged in the WLAN PCMCIA /PCI

Adapter, you will see Wireless Configuration Utility Country Selector,

select the country where you are using this Wireless device, users

are responsible for ensuring that the channel set configuration is in

compliance with the regulatory standards of these countries.

Warning: Be noted that selecting the incorrect region may

result in a violation of applicable law; you will need to select the

correct domain.

6. When the WLAN PCMCIA /PCI Adapter was installed, you will see

the icon on the Windows task bar.

When the icon in the toolbar represents in green color, it is properly

connected to the network and if it represents in red color, then it is

not connected to the network.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali X-Micro Hardware di rete

X-Micro

X-Micro XWL-11BPRG Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente