Xantech MRC88M Manuale di programmazione

- 1 -

QUICK START INSTRUCTIONS

MRC88m & XT1

Multi-Room Controller and Tuner Integration

DESCRIPTION

This document describes how to integrate the XT1 with the MRC88m, using Dragon-Drop software.

For this example, we are going to connect the XT1 to the MRC88m as Source Input 1, and are going

to use the COM RS232 port of the MRC88m for communications with the XT1.

PHYSICAL CONNECTIONS

Connect the RED and WHITE analog stereo connectors from the XT1 to the appropriate SOURCE 1

inputs of the MRC88m.

Connect the RS232 port of the XT1 to the COM port of the MRC88m, using the RJ45-to-DB9

connector included with the XT1. No additional adaptors are necessary.

CREATING A NEW MRC88m PROJECT

1) Start Dragon-Drop.

2) Select the New Project item under the File Menu (“File->New Project”).

3) Open the Audio/Video Distribution project type and select “MRC88m”.

4) Select the “Blank Project” Option, and then click “OK”. You should now see the MRC88m basic

keypad.

- 2 -

ENABLING THE XT1 DRIVER

1) Open the Project Options dialog box (“File->Project Options”).

2) Select the “Source Components” tab.

3) Select the “XT1” tab.

4) Click the “Enabled” check box to enable XT1-1. (Note that the MRC88m supports up to 6 XT1’s,

denoted XT1-1 thru XT1-6. For this example we are going to be using XT1-1.)

5) In the “Port” field, make sure that “Com Port” is selected. This lets the driver know how the XT1 is

connected to the MRC88m.

TELLING THE MRC88m WHICH SOURCE INPUT IS CONNECTED TO THE XT1

1) In the “Source Input” region, click the check box next to the “Connect to Source Input” text.

2) Make sure that “Source 1” is selected in the drop-down box to the right. This let’s the MRC88m

know that Source 1 in the system is the XT1.

3) Click “OK” at the bottom of the dialog box to close the “Options” dialog.

- 3 -

At this point you have successfully told the MRC88m that an XT1 is connected, and how it is

connected.

- 4 -

CONFIGURING THE MRC88m KEYPAD TO CONTROL THE XT1

The XT1 is controlled by using the new “Metadata” Internal Commands. These new commands can

be used to control the XT1, XIS100, the XMusic, and the iPort. See Figure 1 at the end of this

document that describes how each Metadata internal command maps to the XT1 function.

1) Just above the Virtual Keypad (under the “Keypad” tab), select “Zone 1” from the drop-down box.

2) On the Virtual keypad, select SRC1.

3) On the right-hand portion of the Dragon window, make sure that the “Internal Commands” tab near

the bottom of the window is selected.

4) On the Virtual Keypad, select the “ÇPAUSE” button.

5) In the “Internal Commands” window, select the “Metadata Up” command.

6) In the “Zone” area, select the current zone, Zone 1.

- 5 -

7) In the “Source” box, select “1”, since the XT1 we want to control is connected to Source 1.

8) Click the “Accept” Button.

You have now successfully programmed the“ÇPAUSE” button in Zone 1 perform the

“Frequency Up” function of the XT1. Continue programming the rest of the MRC88m keypad

buttons to the other desired XT1 functions. (See Figure 1 at the end of this document that

shows how the Metadata commands map to an XT1 function.

In addition to the Metadata commands, Dragon comes

with a very thorough set of RS232 commands accepted

by the XT1. You can add these commands to any

macro in your MRC88m project. You will find these

commands in the Palette Editor, under the Xantech

brand, XT1 device. See the picture below.

Please pay attention to Figure 2 at the end of this

document that shows how buttons on the SPLCD-

MRC-KP Tuner page to map the MRC88m Virtual

Keypad buttons.

- 6 -

CONFIGURING SOURCE 1 CORRECTLY FOR THE “AUTO CONFIGURATION” FEATURE OF

THE SPLCD WHEN CONNECTED TO A MRC88m

1) On the Virtual Keypad, select SRC1.

2) On the right-hand portion of the Dragon window, select the “Properties” tab near the bottom of the

window.

3) Click the “Source Type” field in the “Button” property. This enables the drop-down box in the field

to the right.

4) Click on the down arrow to expose the drop-down menu, and select Tuner. This will be used to tell

any connected SPLCD’s that Source 1 is a Tuner type of source, so that the SPLCD can display the

appropriate page for this source.

5) Now click on the text box to the right of the “Source Name” field. Type in the name of this source,

such as “Radio”. This text will be used to label the Source 1 button of the SPLCD.

6) Finally, click on the “Apply” button. Note that no changes to these properties will be made until the

“Apply” button is clicked!

- 7 -

Figure 1: Below, Mapping the Internal Metadata commands to XT1 functions

Figure 2: Below, Mapping the “Tuner” page buttons of the SPLCD-MRC-KP to the MRC88m

Virtual Keypad buttons

SPLCD Button Maps To: MRC88m Keypad Button

Preset 1 Pause Tier 2

Preset 2 Fwd Tier 2

Preset 3 Stop Tier 2

Preset 4 Rew Tier 2

Preset - Ch-

Preset + Ch+

Tune - Stop

Tune + Pause

Vol Up Vol +

Vol Down Vol -

Mute Mute

Power Pwr

Xantech Corporation

13100 Telfair Avenue

Sylmar, CA 91342

Instr, Quick Start, MRC88m & XT1 Tuner

This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech

Corporation.

Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.

XT1 Function Metadata Internal

Command

Frequency Up Metadata Up

Frequency Down Metadata Down

Preset Up Metadata Next Track

Preset Down Metadata Prev Track

Preset 01 Metadata Pause

Preset 02 Metadata Fast Forward

Preset 03 Metadata Stop

Preset 04 Metadata Rewind

Altri manuali per MRC88M

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Xantech Controllori

Xantech

Xantech 793-10 Manuale utente

Xantech

Xantech CWTC10 Manuale utente

Xantech

Xantech MRKP2 Manuale utente

Xantech

Xantech 590-10 Manuale utente

Xantech

Xantech MRC88M Manuale di programmazione

Xantech

Xantech MRC88M Manuale di programmazione

Xantech

Xantech MATCH MAKER 760-00 Manuale utente

Xantech

Xantech MRWC Manuale utente

Xantech

Xantech DPC100 Manuale utente

Xantech

Xantech MRKP1 Manuale utente

Xantech

Xantech MRC88M Manuale di programmazione

Xantech

Xantech CRM-WIC Manuale utente

Xantech

Xantech VCIR-CFL Manuale utente

Xantech

Xantech MIRV1 Manuale utente

Xantech

Xantech MRKP2E Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente