Xenarc 700TSV Manuale utente
700TSV / YV INSTALLATION MANUAL
2│ Table of Contents
Features ........................................................03
Specifications ..............................................04
Hardware Installation. ..............................08
Additional Info ..............................................13
Remote Control. ..........................................07
Owner’s Record ...........................................14
Quick - Start .................................................05
700TSV / 700YV Models
3 │ Features
Model Comparison Chart
700TSV 700YV
VGA ( D-SUB 15 Pin ) Input
VIDEO ( RCA ) Inputs
AUDIO ( RCA ) Inputs
Built - In Speaker
High Quality Scaling
High Quality Anti - Aliasing
Auto Power On
Touch Screen
StandardNot Available
1 1
22
3
PC AUDIO ( DC 3.5mm ) Input
3
1 1
● For In-Car Computing, PC, Server, GPS, and various VGA Use
● High Bright LCD Panel with LED Backlight
● 5-wire Resistive Touch Screen (USB)
● Multi-Monitor Touchscreen Support
● VGA Input ( D-SUB 15 Pin ) x 1
● Video Input x 2
●Audio Input x 3
● Built-in Speaker x 1
● NTSC / PAL Multi-System
●16:9 Aspect Ratio
● High Resolution Display
● Auto detects 800x480 resolution
● Upgraded High-Brightness LED Backlight
● Chip Monolithic Ceramic Capacitors for improved durability
● Automatic backlight level adjustment through built-in ambient light sensor
● Pixelworks High Performance Image and Video Signal Processor
● AISS - Advanced Image-Scaling and Shaping
● 16:9 / 4:3 Scaler settings
● Last Input memory
● Last Power setting memory
● IR Remote Control
● Auto power-on upon signal detection
● Automatic display adjustment
● On Screen Display Control
● Mirror Image Flip
● Vertical Image Flip
● Function to disable front buttons
● Function to disable On Screen Text
●AV2 Auto Switching for backup camera
● Copper Stand: 360° / Height Adjustment
● VESA 50mm mounting holes
● 26-Pin heavy-duty connector
● Anti Glare Coating
● Supports 10V DC ~ 30V DC
● "E" Mark Certified for Automotive use
Features
4 │ Specification
Specifications
Display Specifications
● Screen Size : Diagonal 7” ( 16: 9 )
● Physical Resolution : 800 ( H ) x 480 ( V )
● Pixel Pitch : 0.0025 ( H ) x 0.0075 ( V ) ( in )
● Dot Resolution : 2400 x 480 = 1,152,000 ( dots )
● Supported Resolution : 640 x 480 ~ 1920 x 1080
● Supported Refresh : 60~75Hz
●LCD Panel Brightness : 500 cd/m²
● Contrast Ratio : 400 : 1
●Response Time : 10~15ms
●Viewing Angle : Vertical : 140゜ / Horizontal : 120゜
●Colors : 6-bits ( 262,144 colors )
Physical Specifications
● Video Source Input
─ RGB analog male connector ( 15-Pin D-SUB ) x 1
─ RCA composite video female connector x 2
● Audio Source Input
─ RCA audio female connector x 2
─ DC 3.5 mini stereo plug x 1
●Touch Panel ( Input / Output ) ( 700TSV Only )
─ USB connector x 1
● Power Source Input
─ Single 12V DC_IN ( Supports 10V~30V )
● External Buttons Input
─ OSD buttons for Power / Select / Menu / Increase / Decrease
─ Power button for power switch
● Dimension ( In ) : 7.72 ( W ) x 4.88 ( H ) x 1.42 ( D )
●Weight ( lb ) : 1.277
Electrical Specifications
● Operating Voltage Range : DC 10V ~ 30V
● Power Supply : DC 12V
● Power Consumption < 10M
● Audio Input < 150MV
Other Specifications
● Operating Temperature : -4℉ ~ 158℉
● Storage Temperature : -22℉ ~ 176℉
● FCC, CE, E13 Certification
●ROHS Compliant
● 24 Month Warranty
5 │ Quick - Start
Attach the 26-Pin connector to the back of
the monitor
Attach the D-Sub 15-Pin connector to your
computer’s analog VGA output connector
Attach your “ Video source one ”
( e.g. VCR, Video Game Console)
to the Yellow RCA connector marked Video 1
Attach your “ Video source two ”
( e.g. Rear View Camera)
to the Yellow RCA connector marked Video 2
Attach your “ Audio sources ” to the white / red
RCA connectors marked Video 1 and video 2.
The sound will be outputted through the
monitor’s internal speaker
Attach the mini stereo jack marked “ PC Audio ”
to your computer’s earphone jack
6 │ Quick - Start
Attach the USB plug to your USB connector
Slide Monitor into optional mounting stand
Secure “ Height ” position by adjusting knob
Secure “ Tilt ” position by adjusting knob
Insert Power Adapter as shown
Touchscreen Installation
( 700TSV Only )
Please download and install the
Touchscreen driver for your
operating system from our
website WWW.XENARC.COM.
7 │ Remote Control
1. Power Button : Turn the monitor ON or OFF.
2. Mirror Button : Enable or Disable the mirroring of the display.
Continue to press it and choose the mirroring you want.
3. Dimmer Buttom : Dim the brightness of the display by pressing this
key continuously to set the brightness level of the display.
( Only available when auto sensor is disabled. )
4. Mute Button : Mute the speaker. Press again to restore the sound
of the speaker.
5. Display Button : Display the current input signal on the screen.
6. Sleep Button : Enable or Disable the sleep timer. Press this button
to select and set the time to turn off the monitor automatically.
7. Picture Button : Enable or select the picture mode you prefer.
Press this button and then you can select standard, user, bright,
or soft.
8. PC auto Button : Enable to adjust the picture automatically, only
available in VGA mode.
9. Menu Button : Enable the OSD menu.
Press this button again to exit.
10. Source Button : Enable to switch to different source input.
11. Vol+ / Vol- Button : Increase or Decrease the Volume.
12. Up / Down Button ( ▲ / ▼ ) : Navigate Up or Down in OSD menu.
13. Left / Right Button ( ◄ / ► ) : Navigate Left or Right in OSD menu,
as well as decreasing or increasing the value of setting in OSD.
14. Enter Button : Confirm the setting or selection.
8 │ Hardware Installation
Buttons description:
1. Power Button : Press to turn ON or OFF the monitor.
2. Select Button : Press to select the input signal to display.
Press the left ( ◄ ) or right ( ► ) to highlight the input source
desired and then press menu button to make the selection.
3. Menu Button : Press the button to show the OSD menu.
And then press the left ( ◄ ) or right ( ► ) to navigate through
the menu.
Press “ Select ” button to go through a list of settings and
options.
Press the left ( ◄ ) or right ( ► ) buttons to change the values
of settings.
Press Menu button again to leave the OSD menu.
4. Right Button : Press this button to increase volume or the value
of settings inside the OSD menu.
5. Left Button : Press this button to decrease volume or the value
of settings inside the OSD menu.
Ambient Light Sensor Description
Ambient light sensor can be enabled or disabled in the OSD by going
into the “ MISC ” category, and selecting the option “ Auto Sensor ”.
When Auto Sensor is enabled, the LCD backlight brightness will be
adjusted automatically according to the ambient lighting condition.
Note
The brightness cannot be adjusted manually through the
dimmer button or through the OSD menu when the Auto Sensor
function is enabled.
9 │ Hardware Installation
OSD ( On-Screen Display ) Menu
The Settings and options in the OSD menu are categorized into 5
Categories : Picture , Img. Adj , Setup , Audio , and Source
Picture : Picture quality related adjustments
● Brightness : Adjust brightness by pressing Left ( ◄ ) or Right ( ► )
buttons. Increase the number for a higher level of brightness.
Decrease the number for a lower level of brightness.
●Contrast : Adjust contrast by pressing Left ( ◄ ) or Right ( ► )
buttons. Increase the number for a higher level of contrast.
Decrease the number for a lower level of contrast.
●Phase : Phase ( fine ) adjustment. Image flickering can be removed
through changing this setting. ( Only valid in VGA mode )
●Frequency : Pixel Clock ( coarse ) adjustment.
( Only valid in VGA mode )
●Sharpness : Sharpness adjustment to make the picture look softer or
sharper. A value range of 0 ( soft ) to 15 ( sharp ).
● Color : Adjust color saturation. Increase the number to make video
image more colorful. Decrease the number to make video image
more monochrome. ( Only valid in AV1 or AV2 modes )
●Backlight : Adjust backlight intensity by pressing Left ( ◄ ) or Right
( ► ) buttons. Increase the number for a higher level of backlight
output. Decrease the number for a lower level of backlight output.
Only works when Auto sensor is turned off.
●Auto Sensor : Enable or Disable Ambient Light Sensor. When Auto
Sensor is enabled, the LCD backlight brightness will be adjusted
automatically according to the ambient lighting condition.
10 │ Hardware Installation
Img.Adj : Image related adjustments
● Image Size : Select how image will be displayed on the screen.
○ VGA input :
- “ Fill All ” will scale and displ
ay the image to fill the screen entirely.
- “ Fill Aspect ” will scale the image and maintain the signal’s
original aspect ratio.
- “ 1 to 1 ” will not scale the image and will display the signal to the
screen 1 to 1.
○ AV1 and AV2 inputs :
- “ Auto ” will select the most appropriate mode automatically.
- “ Fill All ” will display the image so that it fills the screen entirely.
- “ 1 to 1 ” will display the image to the screen 1 to 1.
- “ Normal ” will display the image in its normal aspect ratio.
- “ Zoom ” will zoom in the image.
●Freeze Frame : Turn ON to Freeze the image on the display.
( Only valid in AV1 or AV2 modes )
● H Position : Adjust the Horizontal position of the image by pressing
left ( ◄ ) or right ( ► ) buttons.
● V Position : Adjust the Vertical position of the image by pressing
left ( ◄ ) or right ( ► ) buttons.
● Auto : To automatically adjust the picture in PC mode.
● Horizontal : To mirror the image horizontal.
● Vertical : To mirror the image vertical.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Xenarc Monitor
Xenarc
Xenarc 700TSH Manuale utente
Xenarc
Xenarc 1029 Manuale utente
Xenarc
Xenarc 1200TS Istruzioni per l'installazione e il funzionamento
Xenarc
Xenarc 700CSH Manuale utente
Xenarc
Xenarc 800 Manuale utente
Xenarc
Xenarc 1020TSV Manuale utente
Xenarc
Xenarc 705YV Manuale utente
Xenarc
Xenarc 805TSV Manuale utente
Xenarc
Xenarc 706TSA Manuale utente
Xenarc
Xenarc 1500TS Manuale utente
