XENO XLCD17LEDe Manuale utente

USER

’

MANUAL

TFT LCD MONITOR

MODEL: XLCD17LEDe

XLCD19LEDe

XLCD21WLEDe

TABLE OF CONTENTS

CE information ------------------------------------------------------------------------ 1

Safety precautions -------------------------------------------------------------------- 1

Before you begin ------------------------------------------------------------------- 3

Scope -------------------------------------------------------------------------------------- 5

Functional specification ------------------------------------------------------------- 5

Controls and indicators -------------------------------------------------------------- 7

PC Menu -------------------------------------------------------------------------------- 9

Channel Selection ------------------------------------------------------------------- 11

Mechanical -------------------------------------------------------------------11

CE INFORMATION

The product must be installed according to the currently valid installation regulations

for EMC to guarantee the designed use and to prevent EMC problems.

The device supplied with this manual is according to the EC, EMC Directive,

2004/108/EC & LVD 2006/95/EC

SAFETY PRECAUTIONS

1. Do not modify the three-prong grounding type monitor power plug in any way.

2. Operate this unit only from the type of power source indicated on the label.

3. Do not block or cover ventilation openings on the back or bottom of the monitor

cabinet.

4. Do not place this monitor near a radiator or heating vent.

5. Do not push objects of any kind through cabinet openings. This may result in fire or

electrical shock.

6. Before adding attachments always ask a service technician to perform routine safety

tests to determine that equipment is in safe operating condition. Ground potential tests

should be part of the routine safety check made by the service technician.

7. Do not place monitor on an unstable cart, stand, or shelf where it may fall and injure

personnel or damage equipment.

8. Route power cords so that they cannot be walked upon or tripped over. Do not allow

anything to rest on the power cord.

9. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not

spill liquid of any kind on the unit.

10.Unplug the power cord from the unit before cleaning the display. Use only a damp cloth.

Do not use alcohol, spirits, or ammonia to clean the display. DO NOT ATTEMPT TO

CLEAN THE INTERIOR OF THIS UNIT- THIS ACTION MUST BE PERFORMED BY

THE SERVICE TECHNICIAN AS REQUIRED DURING NORMAL MAINTENANCE.

11.Refer all servicing to qualified service personnel. REMOVAL OF BACK COVER BY

UNAUTHORIZED PERSONNEL MAY EXPOSE THE USER TO DANGEROUS

VOLTAGES OR OTHER HAZARDS.

12.Unplug the unit immediately and notify the service technician.

A. If liquid has been spilled into the display or the display has been exposed to rain or

water.

B. If the unit has been dropped or the cabinet damaged.

C. If fuses continue to blow.

D. If the power cord is damaged or frayed.

E. If a distinct change from normal operation is apparent.

When replacement parts are required, be sure that the service technician uses

components specified by the manufacturer which have the same characteristics as the

original parts. UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL

SHOCK OR OTHER HAZARDS.

Upon completion of any service or repairs, ask the technician to perform safety checks to

determine that the equipment is in safe operating condition.

WARNING:

SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVERS OF THIS

MONITOR. DO NOT OPEN THE COVERS UNDER ANY CIRCUMSTANCES,

THERE ARE NO USER SERVICEABLE COMPONENTS INSIDE

Before You Begin

Read these instructions before installing or operating this product.

Note: This installation should be made by a qualified service person and should conform

to local codes.

This manual provides installation and operation information. To use this document, you

must have the following minimum qualifications:

A basic knowledge of CCTV systems and components

A basic knowledge of electrical wiring and low-voltage electrical connections

Intended use

Only use this product for its designated purpose; refer to the product specification and user

documentation.

Customer Support

For assistance in installing, operating, maintaining and troubleshooting this product refer to

this document and any other documentation provided. If you still have questions, please

contact Norbain Technical Support and Sales:

Vista, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41 5TP,

England.

UK +44 (0) 118 912 5000

Note: You should be at the equipment and ready with details before calling Technical

Support.

Conventions Used in this Manual

Boldface or button icons highlight command entries. The following WARNING,

CAUTION and Note statements identify potential hazards that can occur if the equipment

is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment

damage.

** Caution:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

This apparatus is manufactured to comply with the radio interference.

A Declaration of Conformity in accordance with the following EU standards has

been made. The manufacturer declares that the product supplied with this

document is compliant the provisions of the EMC Directive 2004/108/EC, the

CE Marking Directive 93/68 EEC and all associated amendments.

All lead-free products offered by the company comply with the requirements

of the European law on the Restriction of Hazardous Substances (RoHS)

directive: 2011/65/EU, which means our manufacture processes and

products are strictly “lead-free” and without the hazardous substances cited

in the directive.

The crossed-out wheeled bin mark symbolizes that within the European

Union the product must be collected separately at the product end-of-life.

This applies to your product and any peripherals marked with this symbol.

Do not dispose of these products as unsorted municipal waste.

* This symbol indicates electrical warnings and cautions.

** This symbol indicates general warnings and cautions.

NORBAIN SD LTD reserves the right to make changes to the product and specification of

the product from time to time without prior notice.

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the

ventilation grills or other openings on the equipment.

WARNING

This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

CAUTION

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICABLE PARTS INSIDE.

RISK OF ELECTRIC SHOCK

1. Scope

This specification is used to define the performance of XLCD17LEDe, XLCD19LEDe,

XLCD21WLEDe series color TFT LCD monitor. These monitors support both video input

and PC input. In video input mode, the system can automatically detect the NTSC signal

and PAL signal. In PC mode, this system can support up to 1920 x 1080 VESA standard.

The user friendly OSD menu is also provided to make this system easy to operate.

2 Functional Specifications

2.1 Power Supply

The power supply spec is listed below,

AC INPUT

AC power input range：Rated voltage 100 – 240 VAC +/- 10%, 47~63Hz,

2 Amps max.

* Max Power consumption：17” – 21W, 19” - 21.5W, 21”- 27W

* Power efficiency：80% typical at normal line input and full load

2.2 Video Characteristics

Composite Video (CVBS): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75 Ω

unbalanced termination to Hi-Z with loop-through operation.

Y/C (S-video): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75 Ωunbalanced

termination to Hi-Z with loop-through operation.

2.3 PC Input

VGA Input

Analogue RGB: 0.707 Vp-p.

Support VESA Standard Timing

HDMI Input

HDMI Compatible Interface

Digital Signal: TMDS.

HDCP: HDCP 1.1

2.4 Audio Input

Signal Level: 1.0 Vrms

2.5 Environmental

Temperature

Operating: 0

C to +40

Storage: -20

C to +60

Humidity

Operating: 10% to 85% (non-condensing)

Storage: 10% to 95% (non-condensing)

2.6 EDID

This series of displays support EDID, but does not support DDC2B function.

2.7 Connectors

H G F E D C B A

A. AC INPUT: AC SOCKET

B. AUDIO OUTPUT: Phone Jack, Stereo

C. AUDIO INPUT: Phone Jack, Stereo

D. CVBS OUTPUT: BNC Connector

E. CVBS INPUT: BNC Connector

F. S-VIDEO (Y/C) INPUT: Mini-DIN 4 pins Connector

G. VGA INPUT: D-SUB 15 pins Connector

H. HDMI INPUT: HDMI Connector

Set up sequence

1. Make sure the power of PC and/or Video source were turned off.

2. Plug the Video signal and VGA cable to monitor.

3. Turns the PC and/or Video source power on.

4. Plug the AC power cord onto AC Socket.

(Use reverse sequence to power down the monitor)

3. Controls and indicators

XLCD17LEDe & XLCD19LEDe MONITOR

A B C D E

A. “Source” button

Press the button to display all the signal channel menus.

B. “Upward” button

Press the button to move the cursor to the needed function.

Press the button to choose function OSD menu.

C. “Downward” button

Press the button to move the cursor to the needed function.

Press the button to choose function OSD menu.

D. “Menu” button

Press the button to display the OSD main menu.

Choose an affirming button in OSD.

E. “Power” button

Press the button to turn on or turn off the displayer.

F. POWER LED Indication

Green - Power on

LED light off - Power off

Flash Green - Sleep mode (PC mode only)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali XENO Monitor

XENO

XENO XLCDHDA21W Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione