Xerox LightScribe Manuale utente
Disc Duplicator
User Guide
Version x.10
Xerox LightScribe
Disc Duplicator
User Guide
Warning
This Xerox CD/DVD/LightScribe duplicator is meant for
back up and distribution of original data authored or
owned by the user. Any duplicated discs made from a
this CD/DVD/Blu-Ray/LightScribe duplicator is the copy-
right ownership of the author or company which owns the
source disc. Any unauthorized copying, editing, or any
part thereof of a copyright disc is strictly prohibited. We
discourage the use of any such action that gives rise to
criminal intent and prosecution.
The seller of this product is not responsible for any poten-
tial illegal actions of the user due to activities beyond the
scope of the products intended use.
Copyrights and Trademarks
All rights reserved. No part of this publication may be re-
produced in any medium printed or electronic without the
prior written permission from the manufacturer. Copyright
©2000-2008. All rights reserved
Xerox LS Duplicator 3
Table of Contents
Chapter 1: Introduction & Manual Overview........ 1-14
Beforeyoustart.................................... 1-14
PackageContents .................................. 1-16
ChapterOverview .................................. 1-16
Chapter 2: Getting to know your system............ 2-17
DuplicatorOverview................................ 2-17
LCDFrontPanel .................................... 2-18
Inputing Characters / Numbers . . . . . . . . . . . . . . . . . . . . . 2-19
Chapter 3: Basic Operations........................ 2-20
Make Disc-to-Disc Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
Section 1: Selecting the Copy Source . . . . . . . . . . . . . 2-21
Section 2: Making Copies from Reader
(when the reader is selected as the source drive). . . 2-22
Make Hard Drive-to-Disc Copies . . . . . . . . . . . . . . . . . . . . . 2-26
Section 1: Loading Master Disc content
into the Hard Drive as a partition/image . . . . . . . . . 2-27
Section 2: Selecting the Copy Source to
theHardDrive .................................. 2-30
Section 3: Making Copies from an existing
partition/image of the Hard Drive . . . . . . . . . . . . . . . 2-31
Design and Printing Labels . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35
Section 1: Design your labels with LightScribe
TemplateLabeler ............................... 2-35
Section 2: Selecting the Print Source of the
systemastheReader............................ 2-38
Section 3: Print copies of your LightScribe label
with the LightScribe Label CD you’ve created . . . . 2-39
4 Xerox LS Duplicator
Table of Contents
Select the Duplication Speed . . . . . . . . . . . . . . . . . . . . . . . 3-45
MixAudioTracks ................................... 3-47
Change the Setup settings . . . . . . . . . . . . . . . . . . . . . . . . . . 3-54
Chapter 4: Menu Overview ......................... 4-55
Appendix A : LightScribe Software Setup
Instructions ....................................... 4-67
Appendix B : Software Installation Guide for
accessing the Hard Drive on a Computer ........... 4-69
Appendix C : Creating an ISO DVD/CD Image File . . 4-72
Appendix D : Troubleshooting ..................... 4-74
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . 4-74
ErrorCode ...................................... 4-79
Xerox LS Duplicator 5
Safety Introduction
Notices and Safety
Please read the following instructions carefully before
operating the machine and refer to them as needed to
ensure the continued safe operation of your machine.
Your Xerox product and supplies have been designed and
tested to meet strict safety requirements. These include
safety agency evaluation and certification, and compli-
ance with electromagnetic regulations and established
environmental standards.
The safety and environment testing and performance of
this product have been verified using Xerox materials only.
Warning:
Unauthorized alterations, which may include the addition
of new functions or connection of external devices, may
impact the product certification. Please contact your Xerox
representative for more information.
6 Xerox LS Duplicator
Marks, Labels
Symbols: All warnings and instructions marked on or supplied with the product should
be followed.
Warning: This symbol alerts users to areas of the equipment where there is the possibil-
ity of personal injury.
FCC Notices For The USA
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
(Reference CFR 47 Part 15 Section 15.21)
Changes or modifications to this equipment not specifically approved by the Xerox Cor-
poration may void the user’s authority to operate this equipment.
•
•
•
•
Xerox LS Duplicator 7
Operational Safety Information
Operational Safety Information
Your Xerox equipment and supplies have been designed and tested to meet strict safety
requirements. These include safety agency examination, approval, and compliance with
established environmental standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety
guidelines at all times:
Do These:
Always follow all warnings and instructions that are marked on or supplied with the
equipment.
Before cleaning this product, unplug the product from the electrical outlet. Always use
materials specifically designated for this product, the use of other materials may result in
poor performance and create a hazardous situation.
Warning: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flam-
mable when used on electromechanical equipment
Always exercise care when moving or relocating equipment.
Always locate the machine on a solid support surface (not on plush carpet) that has
adequate strength to support the weight of the machine.
Always unplug this equipment from the electrical outlet before cleaning.
Do Not Do These:
Never use a ground adapter plug to connect the equipment to a power outlet that
lacks a ground connection terminal.
Never attempt any maintenance function that is not specifically described in this
documentation.
Never obstruct ventilation openings. They are provided to prevent overheating.
Never remove covers or guards that are fastened with screws. There are no operator
serviceable areas within these covers.
•
•
•
•
•
•
•
•
•
8 Xerox LS Duplicator
Never locate the machine near a radiator or any other heat source.
Never push objects of any kind into the ventilation openings.
Never place this equipment where people might step on or trip on the power cord.
Electrical Safety Information
1 The power receptacle for the machine must meet the requirements stated on the
data plate on the rear of the machine. If you are not sure that your electrical supply
meets the requirements, please consult your local power company or an electrician
for advice.
2 The socket outlet shall be installed near the equipment and shall be easily acces-
sible.
3 Use the power cable that is supplied with your machine. Do not use an extension
cord or remove or modify the power cord plug.
4 Plug the power cable directly into a correctly grounded electrical outlet. If you are
not sure whether or not an outlet is correctly grounded, consult an electrician.
5 Do not use an adapter to connect any Xerox equipment to an electrical outlet that
lacks a ground connection terminal.
6 Do not place this equipment where people might step or trip on the power cable.
7 Do not place objects on the power cable.
8 Do not push objects into slots or openings on the machine. Electrical shock or fire
may result.
9 Do not obstruct ventilation openings. These openings are used to provide proper
cooling to the Xerox machine.
•
•
•
Xerox LS Duplicator 9
Electrical Supply
1 This product shall be operated from the type of electrical supply indicted on the
product’s data plate label. If you are not sure that your electrical supply meets the
requirements, please consult a licensed electrician for advice.
Warning: This equipment must be connected to a protective earth circuit. This
equipment is supplied with a plug that has a protective earth pin. This plug will
only fit into an earthed electrical outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, contact a licensed electrician to replace the
outlet.
2 Always connect equipment to a correctly grounded power outlet. If in doubt, have
the outlet checked by a qualified electrician.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back
of the machine as a plug-in device. To remove all electrical power from the equipment,
disconnect the power cable from the electrical outlet.
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and discon-
nect the power cable(s) from the electrical outlet(s). Contact an authorized Xerox Service
Representative to correct the problem:
The equipment emits unusual odors or makes unusual noises.
The power cable is damaged or frayed.
A wall panel circuit breaker, fuse, or other safety device has been tripped.
Liquid is spilled into the machine.
The machine is exposed to water.
Any part of the machine is damaged
•
•
•
•
•
•
10 Xerox LS Duplicator
Maintenance Information
1 Any operator product maintenance procedures will be described in the user
documentation supplied with the product.
2 Do not carry out any maintenance on this product which is not described in the
customer documentation.
Warning: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flam-
mable when used on electromechanical equipment.
3 Use supplies and cleaning materials only as directed in the Operator section of this
manual.
4 Do not remove covers or guards that are fastened with screws. There are no parts
behind these covers that you can maintain or service.
Product Safety Certification
This product is certified by the following Agency using the Safety standards listed
Agency Standard
Underwriters Laboratories Inc. UL60950-1
Underwriters Laboratories Inc. CSA C22.2 No. 60950-1-03
SPORTON International Inc. EN 55022:1998/A1:2000/A2:2003 Class B,
EN 61000-3-3:1995/A1:2001,
EN 55024:1998/A1:2001/A2:2003
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
