Xerox Document Centre 50 Manuale utente

copyrightable material and information now allowed by statutory or

judicial law or hereinafter granted, including without limitation,

material generated from the software programs that are displayed

on the screen such as styles, templates, icons, screen displays,

looks, etc.

Xerox®, The Document Company®, the stylized X, and all Xerox

product names and product numbers mentioned in this publication

are registered trademarks of Xerox Corporation. Xerox Canada is a

licensee of all the trademarks. Other company brands and product

names may be trademarks or registered trademarks of their

respective companies and are also acknowledged.

PANTONE® Colors generated by the DocuColor 12 are four and/or

three-color process simulations and may not match PANTONE-

identified solid color standards. Use current PANTONE Color

Reference Manuals for accurate color.

PANTONE®Color simulations are only obtainable on this product

when driven by qualified Pantone-licensed software packages.

Contact Pantone, Inc. for a current list of qualified licensees.

PANTONE® and other Pantone, Inc. trademarks are the property of

Pantone, Inc. ©Pantone, Inc., 1988.

Changes are periodically made to this document. Technical updates

will be included in subsequent editions.

Printed in the United States of America.

DOCUMENT CENTRE CS 50 USER GUIDE III SAFETY NOTES

Safety Notes

The Xerox Document Centre ColorSeries 50

copier/printer and the recommended maintenance

supplies have been designed and tested to meet

strict safety requirements. Attention to the

following notes will ensure the continued safe

operation of your copier/printer.

Electrical safety

•Use only the power cord supplied with this

equipment.

•Plug the power cord directly into a correctly

grounded electrical outlet. Do not use an

extension cord. If you do not know whether or

not an outlet is grounded, consult a qualified

electrician

•Do not use a ground adapter plug to connect

this equipment to an electrical outlet that lacks

a ground connection terminal.

WARNING: You may get a severe electrical

shock if the outlet is not correctly grounded.

•Do not place the copier/printer where people

may step on or trip on the power cord. Do not

place objects on the power cord.

•Do not override or disable electrical or

mechanical interlocks.

•Do not obstruct the ventilation openings.

These openings are provided to prevent

overheating of the machine.

SAFETY NOTES IV DOCUMENT CENTRE CS 50 USER GUIDE

WARNING: Never push objects of any kind into

slots or openings on this equipment. Making a

contact with a voltage point or shorting out a part

could result in fire or electrical shock.

•If any of the following conditions occur, switch

off the power to the machine immediately and

disconnect the power cord from the electrical

outlet. Call an authorized Xerox service

representative to correct the problem.

–The machine emits unusual noises or

odors.

–The power cord is damaged or frayed.

–A wall panel circuit breaker, fuse, or other

safety device has been tripped.

–Liquid is spilled into the copier/printer.

–The machine is exposed to water.

–Any part of the machine is damaged.

Disconnect Device

The power cable is the disconnect device for this

equipment. It is attached to the back of the

machine as a plug-in device. To remove all

electrical power from the machine, disconnect the

power cable from the electrical outlet.

DOCUMENT CENTRE CS 50 USER GUIDE V SAFETY NOTES

Laser safety

CAUTION: Use of controls, adjustments, or

procedures other than those specified in this

documentation may result in a hazardous

exposure to laser radiation.

This equipment complies with international safety

standards. With specific regard to laser safety, the

equipment complies with performance standards

for laser products set by government, national,

and international agencies as a Class 1 laser

product. It does not emit hazardous light, as the

beam is totally enclosed during all phases of

customer operation and maintenance.

SAFETY NOTES VI DOCUMENT CENTRE CS 50 USER GUIDE

Maintenance safety

•Do not attempt any maintenance procedure

that is not specifically described in the

documentation that is supplied with your

copier/printer.

•Do not use aerosol cleaners. The use of

supplies that are not approved may cause

poor performance of the copier/printer, and

could create a dangerous condition.

•Use the supplies and cleaning materials only

as directed in the System Administration

Guide, chapter 4, “Maintenance.”Keep all of

these materials out of the reach of children.

•Do not remove the covers or guards that are

fastened with screws. There are no parts

behind these covers that you can maintain or

service.

Do not perform any maintenance procedures

unless you have been trained to do them by a

Xerox representative or unless a procedure is

specifically described in one of the copier/printer

manuals.

DOCUMENT CENTRE CS 50 USER GUIDE VII SAFETY NOTES

Operational safety

Your Xerox equipment and supplies were

designed and tested to meet strict safety

requirements. These include safety agency

examination, approval, and compliance with

established environmental standards.

Your attention to the following safety guidelines

will help ensure the continued safe operation of

your copier/printer:

•Use the materials and supplies specifically

designed for your copier/printer. The use of

unsuitable materials may result in poor

performance of the machine and possibly a

hazardous situation.

•Follow all warnings and instructions that are

marked on or supplied with the machine.

•Place the machine in a room that provides

adequate space for ventilation and servicing.

•Place the machine on a level, solid surface

(not on a thick pile carpet) that has adequate

strength to support the weight of the machine.

•Do not attempt to move the machine. A

leveling device that was lowered when your

machine was installed may damage the

carpet or floor.

•Do not locate the machine near a heat source.

•Do not locate the machine in direct sunlight.

SAFETY NOTES VIII DOCUMENT CENTRE CS 50 USER GUIDE

•Do not locate the machine in line with the cold

air flow from an air conditioning system.

•Do not place containers of coffee or other

liquid on the machine.

•Do not block or cover the slots and openings

on the machine. Without adequate ventilation,

the machine may overheat.

•Do not attempt to override any electrical or

mechanical interlock devices.

WARNING: Be careful when working in areas

identified with this warning symbol. These areas

may be very hot and could cause personal injury.

If you need any additional safety information

concerning the machine or materials, contact your

Xerox representative.

Ozone safety

This product produces ozone during normal

operation. The ozone is heavier than air, and the

quantity is dependent on copy volume. Providing

the correct environmental parameters, as

specified in the Xerox installation procedures,

ensures that concentration levels meet safe limits.

If you need additional information about ozone,

request the Xerox publication, OZONE,

600P83222, by calling 1-800-828-6571 in the

USA. For a French language version, call 1-800-

828-6571 in the USA, then press 2.

DOCUMENT CENTRE CS 50 USER GUIDE IX NOTICES

Notices

Radio Frequency Emissions

FCC

This equipment has been tested and found to comply with

the limitsfor a Class B digital device,pursuant to Part 15of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If thisequipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the

equipment and receiver.

•Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

•Consult the dealer or an experienced radio/TV

technician for help.

Changes or modifications to this equipment not

specifically approved by the Xerox Corporation may void

the authority granted by the FCC to operate this

equipment.

NOTICES X DOCUMENT CENTRE CS 50 USER GUIDE

Shielded cables must be used with this equipment to

maintain compliance with FCC regulations.

In Canada

This digital apparatus does not exceed the Class

B limits for radio noise emissions from digital

apparatus as defined in the Radio interference

regulations of Industry Canada.

FCC

The following applies to the product when

equipped with the Token Ring or Banyan Vines

connectivity options:

This equipment has been tested and found to

comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules.These limits

are designed to provide reasonable protection

against harmful interference when the equipment

is operated in a commercial environment. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his/her own

expense.

Changes or modifications to this equipment not

specifically approved by the Xerox Corporation

may void the user’s authority to operate this

equipment.

Shielded cables must be used with this equipment

to maintain compliance with FCC regulations.

In Canada

This digital apparatus does not exceed the Class

A limits for radio noise emissions from digital

apparatus as defined in the Radio interference

regulations of Industry Canada.

Altri manuali per Document Centre 50

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Xerox Fotocopiatrice

Xerox

Xerox DOCUCOLOR 12 Manuale

Xerox

Xerox CopyCentre C165 Manuale utente

Xerox

Xerox Copycentre C118 Istruzioni di installazione e manutenzione

Xerox

Xerox XC811 Manuale utente

Xerox

Xerox 4595 Manuale utente

Xerox

Xerox DOCUCOLOR 12 Manuale utente

Xerox

Xerox XC356 - Home Office Copier Manuale utente

Xerox

Xerox C123 Copycentre Manuale

Xerox

Xerox Document Centre 240 Manuale utente

Xerox

Xerox Copier Manuale utente

Xerox

Xerox DocuColor 3535 Manuale utente

Xerox

Xerox 2006NPC - DocuColor Color Laser Manuale operativo

Xerox

Xerox 2006NPC - DocuColor Color Laser Manuale utente

Xerox

Xerox DocuColor 5750 Manuale utente

Xerox

Xerox DocuColor 250 Istruzioni per il montaggio

Xerox

Xerox DOCUCOLOR 12 Manuale

Xerox

Xerox D95 Manuale di istruzioni

Xerox

Xerox Regal 5790 Manuale utente

Xerox

Xerox WorkCentre Pro 128 Manuale utente

Xerox

Xerox DocuColor 5750 Manuale utente

Xerox

Xerox 3030 Manuale utente

Xerox

Xerox 4595 Manuale tecnico

Xerox

Xerox Phaser 7800 Manuale operativo

Xerox

Xerox D95 Manuale utente

Manuali Fotocopiatrice popolari di altre marche

Canon

Canon iR1210 Manuale di riferimento

Ricoh

Ricoh FW740 Manuale utente

Minolta

Minolta CF910 Manuale utente

Ricoh

Ricoh B003 Manuale utente

Oce

Oce 9800 Manuale utente

Olivetti

Olivetti d-Copia 1800 Manuale utente

Minolta

Minolta Di181 Manuale utente

Canon

Canon iR5000i Manuale utente

Telecrane

Telecrane F25 Manuale utente

Canon

Canon NP6317 Come usare

Sharp

Sharp AR-5015 N Manuale utente

Ricoh

Ricoh Di-C1 Manuale utente

Mita

Mita MIP-2400 Manuale

Sharp

Sharp AL-2061 Manuale utente

Muratec

Muratec MFX-C2280 Manuale utente

Ricoh

Ricoh FT5034C Manuale utente

Minolta

Minolta EP4000 Manuale utente

Ricoh

Ricoh V-C3 Guida all'installazione