Xexun TK103-2 Manuale utente
G
GP
PS
S
T
Tr
ra
ac
ck
ke
er
r
103-2 Quick start guide
Thanks for choose our product. This Quick Start guide tells you how to se
t up your GPS Tracker.
See picture 1 connect antennas in right way and put antennas outside.
See picture 2 inside two SIM cards and TF card.
See picture 3 connect wires in right way.
Unit will turn on automatically when put the SIM card in，the red LED con
verted to one second flashes, SIM card Registration Successful,LED light w
as converted to three seconds blinking GPS positioning success.
Confirm your SIM card have calling, send SMS, GPRS function.
Confirm your SIM card have enough balance (money).
Confirm your SIM card can show caller ID and don not use call forwarding
function.
Now you can operate the function .Begin!
How to connect the antenna.
Wires connection.
⒈Black wire: -12V
⒉Red wire: +12V
⒊Purple wire : ACC
⒋Microphone
⒌Connect relay.
⒍White wire: connect guard
against theft implement.
⒎SOS.
⒏Oil and Power
8
Two SIM card.
Unit will turn on for another one automatically When no fee with one SIM
card.
TF card*.
Support 2GB TF card, over-the-air update, resume from break point cannot
work without TF card.
Over the air update.
Update can be finished by SMS ,and also the software on our website will
be update occasionally
Breakpoint continuingly.
Date will be saved at SD card when in weak GPRS signal and will be send to
platform automatically again when have GPRS signal.
Password.
We suggest change the password and keep it in mind. Please contact with
franchiser if you forgot it
Authorization.
, Unit only work with correct one.
SMS will be send to Authorized number. Authorized number can send the
command without password.
Traffic Mode
When moved ,the device will send GPS data to monitor platform or mobile
phone automatically; when stay still, the device will go to sleep to save power.
Internet monitor.
Set APN.
APN stands for Access Point Name. For
example picture ,China mobile “CMNET”,
send SMS“123456apn cmnet”to the unit；
if APN have user name and password, For
example picture ,Microcell，APN is
internet., user name：fido , password：
fido
IP and port.
When APN setting succeed, send SMS“123
456adminip 119.147.23.100 2337”，it will
reply“ADMINIP ok!”.“2337”is port number
Data transmission.
Send SMS:“123456t010s***n”to the unit,
will reply”t010s***n ok”.Data will be
transmissionto the platform every 10
seconds. stop send sms“123456tmno”
Internet platform.
Please contact franchiser.
They will supply you
platform website, User
name, Password and help
you to add your unit into
platform.
You can check more inf
ormation about platform i
n CD-ROM.
Remote control oil and circuit.
Send SMS“123456powercar 11”to cut
off oil and circuit；Send
SMS“123456powercar 00”to supply oil and
circuit again.
Warning：Please make sure the vehicle
stay still before using this order.
Indice
Altri manuali Xexun GPS
Xexun
Xexun TK-102 Manuale utente
Xexun
Xexun GSM/GPRS/GPS WATCH TRACKER Manuale utente
Xexun
Xexun TK-103 Manuale utente
Xexun
Xexun TK-102 Manuale utente
Xexun
Xexun GPS103AB Manuale utente
Xexun
Xexun TK-102 Manuale utente
Xexun
Xexun Tk 102-2 Manuale utente
Xexun
Xexun XT-009 Manuale utente
Xexun
Xexun TK-102 Manuale utente
Xexun
Xexun TK106 Manuale utente
