Xiaomi 5G CPE Pro Manuale utente
Xiaomi 5G CPE Pro Uživatelská příručka .
Instrukcja obsługi Xiaomi 5G CPE Pro .
Xiaomi 5G CPE Pro Benutzerhandbuch .
5G CPE Pro User Manual .1
9
17
25
Product Overview
Read this manual carefully before use, and retain it for future reference.
Thank you for choosing Xiaomi 5G CPE Pro. It provides a high-speed
5G experience. You can enjoy data service via Wi-Fi or ethernet cable.
This user manual briefly describes the appearance, usage, and procedures on how to configure
the seings of this product.
Note: Illustrations of product, accessories, and user interface in the user manual are for
reference purposes only. Actual product and functions may vary due to product enhancements.
1
1
2
3
4
5
6
Show the status of the 5G signal, 4G signal, Wi-Fi, and
SYSTEM of the router
Turn on: Press and hold the buon for more than 3 seconds
when the router is off
Turn off: Press and hold the buon for more than 3 seconds
when the router is on
Press and hold the buon for more than 5 seconds to
restore factory seings
Open the cover, and then insert the SIM card
For endpoint device or broadband connections
For power input
Indicator
Power Buon
4G
Wi-Fi
SYSTEM
Reset Buon
SIM Card Slot
Ethernet Port
Power Port
White: Strong signal
Blinking white: Weak signal
Off: No signal
5G
White: Strong signal
Blinking white: Weak signal
Off: No signal
White: Wi-Fi is on
Off: Wi-Fi is off
White: Operating normally
Orange then turns into white: Starting normally
Orange: Error
Blinking orange: System updating
Off: The router is turned off
Indicator Descriptions
2
1
2
3
4
5
6
Parts Introduction
How to Use
1. Make sure to use nano-SIM card.
2. Open the SIM card cover on the back of the router.
3. Insert the SIM card into the slot as illustrated.
3
mini-SIM (2FF) micro-SIM (3FF) nano-SIM (4FF)
SIM card
Connecting to Wi-Fi
Managing Your Router
4. Close the SIM card cover.
5. Plug the power adapter into the router, and the indicators will
light on when the router is connected to the network successfully.
You can connect your smartphone or other electronic devices to
the Wi-Fi by the default Wi-Fi name and password. The Wi-Fi name
and password are on the boom of the router.
Note: Please open the management page to change the default Wi-Fi name and password in
time. You need to reconnect to the Wi-Fi aer the Wi-Fi name or password is changed.
Note: Please open the management page to change the default login password in time.
4
Once the initial Wi-Fi is connected, Log in to the management page
at router.miwifi.com or 192.168.31.1 via a web browser to manage
your router. Follow the instructions on the page to complete the
configuration process. The default login password is on the boom
of the router.
1. How to reset the router to factory seings?
Make sure the router is turned on and starts working. Press and hold the Reset buon
for more than 5 seconds, and release the buon when the system indicator turns
orange. The reset will be completed aer the router is successfully restarted.
Caution: Restoring to factory seings will cause a total loss of the data, including CPE
configuration and SMS. It is recommended to back up your data before restoring factory
seings.
2. What should I do if the 5G signal indicator and 4G signal indicator are off?
Step 1: Check whether the SIM card is correctly installed.
Step 2: Check whether the SIM card works well.
Step 3: If your SIM card requires a PIN, enter the correct code to unlock the card.
Step 4: Restore to factory seings and try again if the problem still exists.
3. What should I do if I forget the login password or Wi-Fi password?
Restore the router to factory seings. The default login password and Wi-Fi password are
on the boom of the device.
4. What should I do if the Internet speed is slow?
Step 1: Check whether the indicator is blinking. If it is, move the router in a place with
beer signal reception.
Step 2: Make sure to use the 5 GHz Wi-Fi network if your smart device is connected to
the internet via Wi-Fi.
Step 3: Check whether the cellular speed is limited by your operator.
Step 4: Restore to factory seings and try again if the problem still exists.
FAQ
5
Regulatory Compliance Information
Hereby, Xiaomi Communications Co., Ltd. declares that
the radio equipment type CB0401 is in compliance with
Directive 2014/53/EU.The full text of the EU declaration of
conformity is available at the following internet address:
hp://www.mi.com/global/service/support/declaration.html
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be
mixed with unsorted household waste. Instead, you should protect
human health and the environment by handing over your waste
equipment to a designated collection point for the recycling of
waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will
help prevent potential negative consequences to the environment
and human health. Please contact the installer or local authorities
for more information about the location as well as terms and
conditions of such collection points.
6
Europe - EU declaration of conformity
Disposal and recycling information
Warning
To comply with CE RF exposure requirements, the device must be installed and
operated 20 cm (8 inches) or more between the product and all person’s body.
Operation of this equipment in a residential environment could cause radio
interference.
This device is restricted to indoor use only when operating in 5150-5350MHz
frequency range in following countries:
7
Wi-Fi
5G NR NSA
LTE
2412 MHz–2472 MHz (≤20 dBm)
5150 MHz–5350 MHz (≤23 dBm)
5470 MHz–5725 MHz (≤30 dBm)
n1/n3/n7/n28/n38/n78 (≤26 dBm)
Band 1/3/7/8/20/28/32/38 (≤25.7 dBm)
Operating Frequency and Radio Frequency Power (radiated and/or
conducted) nominal limits applicable to this radio equipment are as
follows:
Manufactured by: Xiaomi Communications Co., Ltd.
Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian
District, Beijing, China
Xiaomi 5G CPE Pro
CB0401
12 V, 3 A
-10°C to 45°C
Name
Model
Input
Operating Temperature
8
Specifications
Produktübersicht
Lesen Sie dieses Handbuch vor der Verwendung sorgfältig durch und
bewahren Sie es auf, um zukünig die Informationen nachlesen zu
können.Vielen Dank, dass Sie sich für Xiaomi 5G CPE Pro entschieden
haben. Es bietet ein 5G-Hochgeschwindigkeitserlebnis. Sie können
den Datenservice über WLAN oder Ethernet-Kabel nutzen.
Dieses Benutzerhandbuch beschreibt kurz das Erscheinungsbild, die Verwendung und die
Vorgehensweise bei der Konfiguration der Einstellungen dieses Produkts.
9
1
2
3
4
5
6
Hinweis: Abbildungen des Produkts, des Zubehörs und der Benutzeroberfläche in dem
Benutzerhandbuch dienen nur als Referenz. Die tatsächlichen Produkte und Funktionen
können aufgrund von Produktverbesserungen variieren.
Indice
Lingue:
Altri manuali Xiaomi Router di rete
Xiaomi
Xiaomi Mesh System AX3000 Manuale utente
Xiaomi
Xiaomi MI 5G CPE Pro Manuale utente
Xiaomi
Xiaomi Router AX3200 Manuale utente
Xiaomi
Xiaomi Mi AIoT Router AX3600 Manuale utente
Xiaomi
Xiaomi Mi Router 4A Gigabit Edition Manuale utente
Xiaomi
Xiaomi R3D PRO Istruzioni operative originali
Xiaomi
Xiaomi Mi Router AX1800 Manuale utente
Xiaomi
Xiaomi Mi AIoT Router AX3600 Manuale utente
Xiaomi
Xiaomi Mi WiFi Range Extender AC1200 Manuale utente
Xiaomi
Xiaomi MI R4A Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza