Xiaomi IMILAB CMSXJ11A Manuale utente
IMILAB Wire-Free Home Security Camera
& IMILAB Wire-Free Camera GateWay
User Manual
Read this manual carefully before use, and retain it for
future reference
Product Overview
Front view
Lens
Photosensor Loudspeaker
MIC
Rear view
PIR sensor
Status
indicator
Power
Base
USB port
(Adjust the
camera's
field of
view/FOV
by rotating)
Note: The protective film of PIR sensor is easy to be scratched,
do not touch it easily. Slight wear will not affect the use.
Packing content: IMILAB Wire-Free Home Security Camera,
IMILAB Wire-Free Camera GateWay, network cable, power cord,
wall mounting accessories pack (including expansion screw
pack), power adapter, user manual, camera bracket
USB charging
port
MicroSD slot
Reset button
Cable interface
Status indicator
Cooling holes
Note: Use MicroSD cards produced by reliable manufacturers
(maximum support capacity is 64G, only support FAT32 format).
It is recommended that the memory card read and write speed
should be no lower than U1/Class10.
Note: Install the gateway between the router and the camera.
Within the coverage of gateway signal, IMILAB Wire-Free Home
Security Camera can be installed indoor using wall accessories
or outdoor, without power socket. Place gateway nearby router,
distance between camera and gateway should be 1~15 meters
(no shelter or interference).
Product Installation
1. Drill two holes on the wall by using the XX of the camera as a
template. It is recommended that you mark the locations of the
holes with a pencil before drilling. The diameter of each hole is
approximately 0.6cm, and the depth is approximately 2.5cm.
Installation on wall
2. Insert the two anchors in the
holes on the wall.
3. Make sure to position the gasket
and then secure it in place by
tightening the screws into the
plastic anchors.
4. Match the grooves on the bottom of the camera with the
raised area on the gasket. Press down until the two surfaces
are flush, then turn the camera in either direction to lock it in
position.
When mounting the security camera on a wall:
Turning the Gateway On
Gateway power on
Step one: Connect one end
of the power cord into the
USB port at the back of
gateway and the other end
into the power.
To prevent accidental injury, the device must be securely
anchored to the wall following the instructions. The wall
must be able to support at least triple the product's total
weight.
Don't install device near any heat source such as air
conditioner external unit, air outlet of both range hood and
gas water heater, etc.
Don't place device in rainly environment to work for long
time.
Note: If the device is not installed following the instructions,
damage caused thereof is not covered under the warranty.
Step two: After electrified, check gateway status according to
indicator status. Yellow light indicates that the gateway is
starting up; flashing yellow light indicates that the gateway is
waiting for connection.
This product works with Mi Home / Xiaomi Home app*. Control
your device with Mi Home / Xiaomi Home
app. Scan the QR code to download and
install the app. You will be directed to the
connection setup page if the app is
installed already. Or search "Mi Home /
Xiaomi Home" in the app Store to download and install it.
Open Mi Home / Xiaomi Home app, tap "+" on the upper right,
and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except
for Russia). The name of the app displayed on your device
should be taken as the default.
Note: The version of the app might have been updated, please
follow the instructions based on the current app version.
Connect with Mi Home / Xiaomi Home App
Note:
The diagram is for reference only. Actual displays will vary
based on different versions of the Mi Home platform and your
smartphone model.
Enter device name to add
Devices nearby Add maneallu
4G
4:19
Add device
Camera
Video camera
4:19
Add device
4G
Search
Camera Video camera
Add gateway
Method one: Open the home page of Mi Jia app, click "+" in
the upper right corner to enter Add device page, click the
button " " in the upper right corner and quickly add
gateway by scanning the QR code on the previous page or
the QR code on the bottom of the camera.
Method two: Open the home page of Mi Jia app, click "+" in
the upper right corner to enter Add device page, scan
nearby devices (Android users only ) or manually enter
"IMILAB Wire-Free Camera GateWay" into the search box to
add device.
Gateway/Camera reset
Gateway: Long press the reset button for 8 seconds,
indicator flashes yellow, gateway is successfully reset.
Camera: Long press the power button for 8 seconds,
indicator flashes blue, camera is successfully reset.
Configure the account and password of wireless network
following the instructions in the app. Blue light indicates that
gateway is connected, flashing yellow light indicates that
connection failed.After wireless network is configured, the
gateway will automatically switch to wired connection when
users connect the network cable into the interface at the
back of gateway, network transmission rate and stability can
be improved.
Note:
The diagram is for reference only. Actual displays will vary
based on different versions of the Mi Home platform and your
smartphone model.
Camera
06:20
Add it now
You have not added any cameras yet
Add camera
Click "IMILAB Wire-Free Camera GateWay" in the home page
of Mi Jia app to enter Add Camera page,
click "Add now", long press the camera
power button for 2 seconds, then the
camera is ready to connect, the
indicator is flashing blue; click "Next",
then the gateway is ready to connect,
the indicator is flashing blue. Connect
the camera following the steps in the App. If successfully
connected, APP will prompt "Connected".
When connecting and in use, keep a distance of over 1 meter
between the camera and the gateway.
Indice
Altri manuali Xiaomi Telecamera di sicurezza
Xiaomi
Xiaomi 28990 Manuale utente
Xiaomi
Xiaomi Mi 360 2K Pro Manuale utente
Xiaomi
Xiaomi AW200 Manuale utente
Xiaomi
Xiaomi Mi MJSXJ02CM Manuale utente
Xiaomi
Xiaomi Mi MJSXJ02CM Manuale utente
Xiaomi
Xiaomi Yi Home Camera Manuale utente
Xiaomi
Xiaomi Mi Home MJSXJ02HL Manuale utente
Xiaomi
Xiaomi Mi 360 Manuale utente
Xiaomi
Xiaomi MJSXJ09CM Manuale utente
Xiaomi
Xiaomi Smart Camera C200 Manuale utente
Xiaomi
Xiaomi Mi Home MJSXJ02HL Manuale utente
Xiaomi
Xiaomi Mi MJSXJ05CM Manuale utente
Xiaomi
Xiaomi Mi MJSXJ02CM Manuale utente
Xiaomi
Xiaomi Smart Camera C400 Manuale utente
Xiaomi
Xiaomi Mi 360 Home Security Camera 2K Manuale utente
Xiaomi
Xiaomi Mi Home Security Camera SXJ01ZM Manuale utente
Xiaomi
Xiaomi 28988 Manuale utente
