XLOCK 142 Manuale utente
XLOCK 142
Installation Guide
MTA_9 344 204 00
3 x screws for locking part
countersunk head 2.5 x 12 mm.
2
4 x screws for lock,
countersunk head 3.5 x 35 mm.
Closing part
XL-S17
Lock with External
Antenna
XL142
Always use lithium
batteries!
Attention:
Please order batteries
separately.
2 x CR123A ,
6V lithium batteries
PACKAGING CONTENTS
Lock
XL142
External
Antenna
32 mm
43 mm
Closing part
XL-S17
3
DIMENSIONS
TRANSPONDER
Optional ! Please order separately.
ISO ID-Card
XL-AUMIFCL
RFID card transponder ISO14443a
type Mifare Classic reading range
up to 2,5cm
KEY FOB
XL-SAMIFCL
Ultraviolet welded case with stainless
steel ring RFID transponder
ISO14443a type Mifare Classic reading
range up to 2,5cm
KEY FOB
XL-AUMIFCL-2
Encapsulated housing with stainless steel ring
RFID transponder ISO14443a type Mifare
Classic reading range up to 3cm
4
ANTENNA HOUSING with handle
XLOCK Antenna housing with handle
XL-A3S
without antenna and cable
Colour: Gray
XLOCK Antenna housing with handle
XL-A3W
without antenna and cable
Colour: White
XLOCK Antenna housing with handle
XL-A3B
without antenna and cable
Colour: Black
5
Optional ! Please order separately.
2 pieces CR123A, 6V lithium
batteries.
For error-free operation, please
always use lithium batteries!
6
PREPARATION FROM THE LOCK
Open the battery compartment
cover and insert the batteries
with the correct polarity (+/-).
Close the battery
compartment cover and fix it
with the screw.
Your lock is now ready
for use.
XL Lock Manager App and on the
Install smartphone (IOS + Android).
Simply scan the QR code with your camera:
After installation, create your XLOCK account
and confirm in the e-mail - > done.
INSTALL THE APP AND CREATE AN ACCOUNT
Attention for Android devices:
For Android devices, the following permissions must be granted without restrictions for
the commissioning of Bluetooth devices: Location and Bluetooth
In retrospect, this is no longer possible with some devices. Then you have to uninstall
and reinstall the app and then restart the device.
For the commissioning of an XLOCK lock, the location and Bluetooth must be activated
in the Android system! 7
CREATE ACCOUNT
1. Tap the button above.
8
2. Enter your email address and
choose a password. To confirm,
password again
type. Tap Register.
3. Verify your account by clicking on the
confirmation link in the XLOCK e-mail in
your e-mail inbox
button. It may be that the confirmation email
has landed in your spam folder.
4. Congratulate! You
have successfully
installed the XL LOCK
Manager app.
ADD NEW LOCK IN YOUR ACCOUNT
1. Tap the button at the
bottom right corner. 2. Tap New Lock.
3. Have XLOCK lock
ready? Press and hold
the reset button with a
screwdriver.
5. Give the lock a
name and tap ADD.
6. The XLOCK lock has now
been successfully linked to
the XLOCK APP and is visible
on the start screen.
4. The lock is displayed
with its ID number. Tap
on the green one to
add your XLOCK.
9
ADD TRANSPONDERS
1. Tap the lock. The lock
menu opens.
2. Tap the NFC Tags
card icon.
3) Tap that in the
lower right corner
to open the tag
Add.
7) Your transponder
is now stored and
unlocks the lock
when held to the
antenna.
6) The lock signals when it
is ready. Then, as shown
in the photo, hold the
transponder to the
antenna from the lock.
4) Select Bluetooth
and tap Next. 5) Give the
transponder a name.
Tap Next, the lock
starts the learning
process.
10
Indice
Altri manuali XLOCK Serratura
XLOCK
XLOCK 100 Manuale utente
XLOCK
XLOCK 220 Manuale utente
XLOCK
XLOCK MifareFlex 40 Manuale utente
XLOCK
XLOCK 145B Manuale utente
XLOCK
XLOCK 186 Manuale utente
XLOCK
XLOCK 10 MifareFlex Manuale utente
XLOCK
XLOCK 145 Manuale utente
XLOCK
XLOCK 141 Manuale utente
XLOCK
XLOCK 181 Manuale utente
XLOCK
XLOCK 102 Manuale utente
