XRadio DX-6000 Series Manuale utente
2
1. DX-6000 series features
DX-6000 series is designed to provide ease of use the functions of digital radio and it is an
easy grip radio for the hand. It’s developed for the consumer safety and convenience in
complex public places such as military, fire department, construction, industrial field. In addition,
it works in dual (analog/ digital) mode and is compatible with existing analog radio currently.
Digital mode is made up for analog radio’s weaknesses such as sound quality, call distance,
and usage time.
The main functions of DX-6000 series are as follows
64 Zones 1024 channels selection (1zone = Max 1024channels)
The total number of channels can be set up to 1025 channels
4.8/1 Watt RF Power
Send/ receive text messages (up to 40 characters), up to 10 sentences
Encryption Mode (AES128. 196. 256)
TX Interrupt
Lone Worker
Man down function(optional)
BCL / BCLO
Time-Out Timer (TOT)
Emergency / siren function
Built-in flash lamp
Vibration(optional)
Voice recording and playback
Mixed channel(analog / digital0
GPS (optional)
5 levels VOX(Voice Operated Transmit)
5 levels S.Q selection (support analog radio).
Remote Radio Stun / Kill / Revive
1Watt audio output
UDC accessory connector for waterproof(IP67)
OLED Display
DC+7.2V Li-ion / 2,600mAH High capacity battery
3
2. Specification
2.1 DX-6000 Series
General
Frequency Range
Frequency Stability
Programmable Channels
Channel Spacing
Digital Vocoder
Dimensions
Weight
Power Source
Current Drain (maximum)
DX-6100 : 136~174 MHz
DX-6200 : 245~254 MHz
DX-6400 : 400 ~510 MHz
±1.5ppm (-30 to +60℃)
16 Zones / 32 Channels
12.5KHz
AMBE++
103mm(H) x 52mm(W) x 32mm(D)
280g
DC +7.2V Li-ion 2,600mAH Battery
Receive mode, rated audio out –420 (Audio Max)
Transmit mode –1,200mA
Standby mode –110mA
Receiver
Sensitivity
Squelch Sensitivity
Selectivity
Spurious and Harmonic Rejection
FM Hum and Noise
Audio Output Power
Audio Distortion
Audio Response
Input Impedance
0.20uV 12 dB SINAD
0.18uV 10dB SINAD
65dB (12.5KHz)
75dB
40dB (12.5KHz)
1 Watt across an 8-ohm load
Less than 3% at rated output
+1, -3 dB from 6dB per octave de-emphasis Characteristic from 300 ~ 3000Hz
50 ohms
Transmitter
RF Power Output
Spurious and Harmonic
FM Hum and Noise
Audio Distortion
Audio Frequency Response
Output Impedance
DX-6100 : 5/1Watt
DX-6200 : 4.8/1Watt
DX-6400 : 5/1Watt
70dB
40dB (12.5KHz)
3% maximum with 1KHz modulation
+1, -3dB from 6dB per octave pre-emphasis Characteristic from 300 ~ 3000Hz
50ohms
4
3. DX-6000 series accessories
* The accessory parts may be changed at the request of the buyer
Main body Battery 2unit charger Antenna
Belt Clip Hand strip User manual
Figure 3-1) DX-6000 series main accessories
5
3.1 DX-6000 series exterior view
Figure 3-2) DX-6000 series exterior view and control buttons
6
Figure 3-3) DX-6000 series LCD icon explanation
3.2 Basic operation description
Button
Description
Power On/Off
volume switch
Turning the power On/Off volume switch clockwise, the radio is turned on
and the volume is louder. Turning the power On/Off volume switch
counterclockwise, the radio is turned off and the volume is decreased.
Volume/
Menu +/- button
By using +/- buttons to adjust the call volume. Press the + button to
increase the volume and the –button to decrease the volume.
*In the menu state, the user can move the menu items.
Up/Down button
The user can change the setting for the set channel. 32 channels can be
put in per each zone.
*In the menu state, the user can move the menu items.
Zone button
The user can change the calling areas in order.
Menu/OK button
The user can enter the menu with this button and select the menu items.
Cancel/Return button
While entering the menu, use the button to return the upper menu. The
user can cancel from the menu setting screen.
P1, P2, P3 button
Programmable Key when operating with Short Key.
Long Key (press longer than 2secs),
-P1 is Lock / Unlock the button lock function
-P2 is Flash On/ Off operation
-P3 is etiquette On / Off operation
Contact List button
It is a button to enter directly into Contact List. The user can enter Private
Contact, Private Call, Group Call or All Call.
7
4. How to operate the basic functions
Please read the instruction manual thoroughly before using the product.
This manual provides useful information related to the operation of the radio.
4.1 Antenna installation and Removal
Turn the antenna clockwise to tighten the antenna and counterclockwise to loosen the antenna
as the Figure 4-1.
Figure 4-1) How to tighten and loosen the antenna from the radio
1. Do not over tighten the antenna as it may cause damage to the radio
2. NEVER HOLD by the antenna when carrying the transceiver.
3. Transmitting without an antenna may damage the transceiver.
4.2 Battery installation and Removal
As shown the figure 4-2, align the battery pack with the groove of the body and push it in the
direction 2 to attach the battery. For removing the battery, push the battery locker and pull it
in the direction of arrow 3 to remove the battery from the radio.
8
Figure 4-2) How to install and remove the battery
4.3 Belt Clip Installation and Removal
As shown the figure 4-3, align the on the belt clip holder and push it in the direction 1. For
removing the belt clip, push the belt clip locker in the direction 2 and pull the belt clip in the
direction 3.
Figure 4-3) How to install and remove the belt clip
4.4 External Accessory Connector Jack
When connecting the external accessories, as show in the figure 4-4, align the main unit and
the accessories, then push the accessories while pulling out the accessories.
9
Figure 4-4) External accessory connector jack
4.5 How to charge the battery
RED lamp indicates the radio is on the charger (XC-200D) that the unit is staring to charge and
the LED will illuminate GREEN when the charging is completed. XC-200D is developed as the
double-ended to charge the main body and the battery pack itself.
When the main body of the radio and the battery packed are charged at the same time, the
main body will be charged first then when charging is completed, the battery pack will be
charged.
Figure 4-5) How to charge the battery
10
5. Operation of the radio
DX-6000 series body buttons are defined as shown the figure 5-1.
Figure 5-1) DX-6000 series button definitions
5.1 Power ON/OFF Volume Switch
Turning the volume switch to the right to turn on the LCD with the start-up sound and turn the
radio on. Turning the power ON / OFF switch to the left while the radio is on will turn off the
power with the message "Goodbye". To increase the volume sound, turn the volume switch
clockwise and to decrease the volume sound, turn the volume switch counterclockwise.
5.2 PTT Button
Press the PTT button to enter the transmit mode and release it to receive mode. To transmit
good sound quality, it is recommended to keep a distance of about 5 to 10cm from the
microphone.
5.3 ZONE Button
Pressing the ZONE button will select the zones registered in the program in order. The user
can use the channel UP / DOWN buttons to select the channel in the selected zone.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali XRadio Ricetrasmettitore
