XtendLan HDC-BOX320OIW Manuale utente
Version 1.0
HDC-BOX320OIW
HD-SDI Digital Camera
User's Manual
Welcome
Thank you for purchasing our camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1.
Before you replace the SD card, please unplug the power cable and then remove the shell
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Installation
Do not apply power to the camera before completing installation.
Do not put object on the camera.
3．Environment
This series camera should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
The working temperature ranges from -10℃to +55℃. Please keep it away from the electromagnetic
radiation object and environment.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
4. Daily Maintenance
Current series camera has no power button. Please unplug all corresponding power cables before your
installation.
Do not touch the CCD or CMOS part; you can use the blower to clean the dust on the surface of the
lens. You can use the dry cloth with some alcohol to clear if necessary.
Please keep the dustproof cap back to protect the CCD or CMOS part if the camera does not work for a
long time.
If there is too much dust on the housing, please use the water to dilute the mild detergent first and then
use it to clean the device with the clear dry cloth. Finally use the dry cloth to clean the device.
5. Accessories
Please open the accessory bag to check the items one by one in accordance with the list below.
Contact your local retailer ASAP if something is missing or damaged in the bag.
Accessory Name Amount
Unit ■1
C/CS adapter ■1
Quick Start
Guide ■1
CD ■1
Table of Contents
1General Introduction ..................................................................................................................6
1.1 Overview........................................................................................................................6
1.2 Feature...........................................................................................................................6
1.3 Specifications................................................................................................................6
1.3.1 Performance...........................................................................................................6
1.3.2 Factory Default Setup...........................................................................................7
2Framework...................................................................................................................................8
2.1 Rear Panel.....................................................................................................................8
2.2 Side Panel ...................................................................................................................10
2.3 Lens..............................................................................................................................10
3Installation .................................................................................................................................12
3.1 Lens Installation..........................................................................................................12
3.1.1 Auto Aperture Lens .............................................................................................12
3.1.2 Manual Lens.........................................................................................................12
3.1.3 Remove Lens.......................................................................................................13
3.2 I/O Port.........................................................................................................................13
4HDC Configuration Tool ..........................................................................................................15
4.1 Overview......................................................................................................................15
4.2 Operation .....................................................................................................................15
Appendix Toxic or Hazardous Materials or Elements ...............................................................19
6
1General Introduction
1.1 Overview
This series camera conforms to the HD-SDI specifications. It supports high speed video signal,
almost no delaying in the transmission. The HD-SDI interface adopts the coaxial cable and uses
the BNC port as the cable standard.
This series product has the Megapixel definition and supports the DC 12V/AC 24V power.
1.2 Feature
Data
Transmission
zAdopt coaxial cable. Use the BNC port as the cable standard.
Peripheral
Equipment
zSupport peripheral equipment connection via the RS485 port, each
peripheral equipment control protocol and interface can be set freely.
Power zExternal power adapter. Support DC 12V/AC 24V power supply.
Assistant
Function
zDay/Night mode auto switch (ICR switch.)
zBacklight compensation: screen auto split to realize backlight
compensation to adjust the bright.
zSupport auto iris function.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for performance specification.
Model
Parameter HDC-BOX320OIW
Syst
em
Main
Processor High performance processor
Image Sensor 1/2.8-inch CMOS
Pixel 2048（H）*1536（V）
Day/Night
Mode Support day/night mode switch and IR-CUT at the same time.
Auto Iris DC drive
Gain Control Fixed/Auto
White Balance Manual/Auto
Exposure
Mode Manual/Auto（It ranges from 1/50 to 1/10000）
Video Frame
Rate Conform to the SDI specifications SMPT274/292 protocol
Video Bit Rate PAL: 1920*1080@25fps；NTSC:1920*1080@30fps
Video Mirror Support mirror, support negative image.
Video Setup Support parameter setup such as brightness, contrastness.
Video
Information OSD menu
Lens Provided
Video Parameter
Lens Interface C/CS optional
7
Video Output 1-channel SDI port
Reset Hardware Reset button
AUX
Interfac
e
RS485 Port Set video parameter
Power Support AC 24V/DC 12V power
Power
Consumption 7W MAX (5W MAX when the ICR switch)
Working
Temperature -10℃~+55℃
Working
Humidify 10%~90%
Dimensions 70×63.2×149.5
Weight 650g
General Parameter
Installation Support various installation modes（Enclosure and bracket is optional）
1.3.2 Factory Default Setup
Please refer to the following sheet for factory default setup information.
Function
Configuration Type Item Name HDC-BOX320OIW
COM No. COM01
Baud rate 115200
Parity None
Data bit 8
Stop bit 1
COM Setup
Current status N/A
Brightness 50
Contrastness 50
Hue 50
Saturation 50
Color
BLC 30. Disable off
Shutter Auto
Gain 50
Aperture Auto
Exposure
Exposure
Compensation
0
Mirror Disable off
Negative
Video
Disable off
WB Auto
Day/night
mode
Auto
Sharpness 7
Parameter
Scene Setup Cloudy. Indoor
Note:
Please press the Reset button for 5 seconds to restore the factory default setup if the device can
not work properly or it can not boot up.
8
2Framework
2.1 Rear Panel
This series camera real panel is shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for detail information.
Interface Name Connector Function
AC 24V/DC 12V Power port zPower port.
zInput 12V DC or
AC 24V
STATUS
Indication Light
Red light zThe red light is on
when the system
is working
properly.
zIt flashes when
the system is
upgrading.
9
Green light zHardware
indication light. It
is on after the
hardware loaded
successfully.
Yellow light zSoftware
indication light. It
is on after the
software loaded
successfully.
IN
NO
C
Reserved port N/A
G GND Alarm input ground
end.
A RS485_A port.
It is to control the 458
tool to set the video
parameter.
B
RS485 port
RS485_B port.
It is to control the 458
tool to set the video
parameter.
RX
TX
G
NA
Reserved port
I/O port
N/A
RESET RESET button zRestore factory
default setup.
zWhen system is
running normally
(power indication
light is red), press
the RESET button
10
for at least 5
seconds, system
can restore
factory default
setup. Yellow light
flikers.
HD-SDI Send out the SDI
video stream
conforming to the HD-
SDI specifications.
GND Please make sure the
device is securely
earthed to prevent the
thunderstorm strike.
2.2 Side Panel
Please refer to the following interface for side panel dimension information. The unit is mm. See
Figure 2-2.
Figure 2-2
2.3 Lens
Please refer to the following interface for lens dimension information. The unit is mm. See Figure
2-3.
Indice
Altri manuali XtendLan Macchina fotografica digitale
