Xtool Laserbox Pro Manuale utente
Document copyright belongs to xTool
Preparation
List of items
Meet your Laserbox
Laserbox
Document copyright belongs to xTool
Document copyright belongs to xTool
1
Button
2
Annular
indicator
3
Power
button
4
Power
interface
5
USB
interface
6
Ethernet
cable
interface
7
Smoke
outlet
8
Aviation
interface
9
Camera
10
Laser
head
11
Tray
12
Honeycomb
panel
13
Laser
tube
Smart smoke purifier
Document copyright belongs to xTool
1
Filter
2
Indicator
3
Aviation
interface
4
Smoke
inlet
5
Smoke
outlet
Annular indicator status
Indicator status
Description
Flashing white
The system gets started.
Solid white
Waiting to connect
Flashing blue
It is ready and the image has been sent successfully
Solid blue
It is in the standby mode and the Laserbox has been connected to
the computer
Six indicators light up
gradually
It is in the working status, and the number of indicators that are
ON indicates the current progress
Solid green
Complete
Green breathing
indicator
Sleep mode. It goses into the sleep mode from the standby mode
after 10 minutes idle.
Solid red
Abnormal
Solid purple
The Laserbox firmware is being upgraded
Download and install software
Document copyright belongs to xTool
Download Laserbox
Laserbox is the laser engraving software designed by Makeblock.
The software features many capabilities that let you make the most out of Laserbox. It also provides
essential design tools that you can depend on to create different shapes and add filters to your
design. Download Laserbox at: https://www.makeblock.com/maker-tools/laserbox-2#Software
Install Laserbox
1.Run installer
Run the Laserbox installer you just downloaded.
2.Choose destination location
Choose the folder into which you're going to install Laserbox. Click Next to continue.
3.Select additional tasks
Follow the on-screen prompts to select any of the additional tasks you want to perform, including
adding a folder to the Start menu or creating a desktop shortcut. Click Install to start the installation.
Document copyright belongs to xTool
4.Finish
After the installation is complete, click Finish to exit the installer.
Document copyright belongs to xTool
Connect devices
Connect the smart smoke purifier to Laserbox.
Document copyright belongs to xTool
1. Plug the 2m exhaust pipe into the purifier and lead the pipe to the window.
2. Connect Laserbox and the purifier with the 1.5m exhaust pipe.
3. Connect Laserbox and the purifier with the aviation connector.
4. Connect to a power supply.
Start Laserbox for the first time
The laser head automatically resets and calibrates after you press the power button. When the first
startup is complete, the annular indicator will turn solid white. The startup process takes a while, so
please be patient.
Connect laserbox to a computer
Connect via a USB cable
1. Use a USB cable to connect Laserbox to your computer.
Document copyright belongs to xTool
2. Open the software Laserbox, choose your Laserbox model, then click Next.
3. Select USB, then click Next to connect Laserbox to the computer.
Document copyright belongs to xTool
4. Connected successfully.
Connect via an Ethernet cable (not included in the package)
1. Use an Ethernet cable to connect Laserbox to your computer.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Xtool Taglierina
