Xtreme Power Conversion P90-BP36 Guida

P90-BP36, BP48, BP72

External Baery Packs

User & Installaon Manual

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 2

External Baery Packs

Table of Contents

Important Safety Instrucons.......................................................................3

Product Overview and Setup........................................................................3

Rear Panel View...............................................................................................................................3

Installaon and Setup with UPS......................................................................................................4

Type of Baery Required..............................................................................5

Baery Replacement....................................................................................5

P90-BP36.........................................................................................................................................5

P90-BP48.........................................................................................................................................7

P90-BP72.......................................................................................................................................10

Wiring Diagram..........................................................................................12

P90-BP36.......................................................................................................................................12

P90-BP48.......................................................................................................................................13

P90-BP72.......................................................................................................................................14

Storage & Maintenance..............................................................................15

Storage...........................................................................................................................................15

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 3

External Baery Packs

Important Safety Instrucons

Please comply with all warnings and operang instrucons in this manual strictly. Save this manual properly and

read carefully the following instrucons before installing the unit. Do not operate this unit before reading through

all safety informaon and operang instrucons carefully.

• Do not try to repair the unit yourself, contact your local supplier or your warranty will be void.

• To eliminate any overheang of the baery box, keep all venlaon openings free from obstrucon and do

not place any foreign objects on top of the baery bank. Keep the baery box 20cm away from the wall.

• Make sure the baery box is installed within the proper environment as specied. (0-40°C and 30-90%

non-condensing humidity)

• Do not install the baery box under direct sunlight. Your warranty will be void if the baeries fail due to

overheang.

• This baery box is not designed for use in dusty, corrosive and salty environment.

• The warranty for this baery bank will be void if water or other liquid is spilled or poured directly onto the

baery box. Similarly we do not warrant any damage to the baery box if foreign objects are deliberately

or accidentally inserted into the baery box enclosure.

• The baery will discharge naturally if the system is unused for a period of me.

• It should be recharged every 2-3 months if unused. If this is not done, then the warranty will be null and

void. During normal operaon, the baeries will automacally remain in charged condion.

• Servicing of baeries should be performed or supervised by trained personnel with knowledge of baer-

ies and the required precauons.

• When replacing baeries, it is necessary to replace ALL baeries with the same quanty, type & capacity.

• CAUTION – Do not dispose of baery or baeries in a re. The baery may explode.

• CAUTION – Do not open or mulate the baeries. The electrolyte from the baeries is toxic and harmful

to the skin and eyes.

• CAUTION – Risk of Electric Shock –Hazardous voltage may exist between baery terminals and ground.

Test before touching with bare hands.

• CAUTION – A baery can present a risk of electrical shock and high short circuit current. The following

precauon should be observed when working on baeries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulated handles.

3. Wear rubber gloves and boots.

4. Do not lay tools or metal parts on top of baeries.

5. Disconnect charging source prior to connecng or disconnecng baery terminals.

• Do not plug or unplug the baery connector if UPS works in DC (discharging) mode.

Product Overview and Setup

NOTE: Before installaon, please inspect the unit. Be sure that nothing inside the package is damaged. Please keep

the original package in a safe place for future use.

Rear Panel View

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 4

External Baery Packs

1. DC connector : connects to either UPS or 2nd baery box

2. DC breaker: Baery over-current protecon breaker

Installaon and Setup with UPS

Unpacking & Inspecon

1. Remove the baery box from the packing.

Note: The baery box is very heavy, be cauous when unpacking and liing the unit to avoid injury.

2. Check the inside package

• Baery box unit

• Manual

• Baery connecon cable x 1

• Ear x 2 & screw x 8

• Extended stand

Selecng Installaon Posion

It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to

the baery box and extend the life of the baeries. Please follow the instrucons below:

1. Keep at least 20cm (8 inches) clearance from the rear panel of the unit from the wall or other obstrucons.

2. Do not block the air-ow to the venlaon openings of the unit.

3. Please ensure the installaon site environmental condions are in accordance with the unit’s working

specicaons to avoid overheat and excessive moisture.

4. Do not place the unit in a dusty or corrosive environment or near any ammable objects.

5. This unit is not designed for outdoor use.

This unit can either be rack mounted or placed vercally on the desk.

Rack Installaon

Tower Installaon

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 5

External Baery Packs

Connecng with UPS and Other Baery Box

Follow below installaon chart to connect with UPS and other baery box with included cable.

Type of Baery Required

This baery box has been designed to operate with the following types of baeries:

36V/9Ah Version: 3 pieces of 12V 9Ah baeries per string

48V/9Ah Version: 4 pieces of 12V 9Ah baeries per string

72V/9Ah Version: 6 pieces of 12V 9Ah baeries per string

Baery Replacement

If your baery box is not installed with baeries, please follow proper procedure to put baeries inside of unit.

NOTE: MAKE SURE THAT THE BATTERY BOX IS DISCONNECTED FROM THE UPS BEFORE PERFORMING THE FOLLOW-

ING SEQUENCE OF OPERATIONS.

P90-BP36

Step 1 : Open the package and place the baery box on a horizontal plane.

Step 2: Remove the removable front panel part by pulling it from the lower extremity.

1st Baery Pack

2nd Baery Pack

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 6

External Baery Packs

Step 3: Remove the xed part of the front panel by removing the 2 screw present.

Step 4: Remove the metal top cover of the baery box by unscrewing 6 screws present on the two sides (3 on the

right side and 3 on the le side), 3 screws on the top and 4 screws on the back side.

Step 5: Once the baery box is opened, remove the baery hold down brackets present on the le side of the bat-

tery box by unscrewing the 2 screws on each bracket.

Pull up rst and then push the baery xing plate.

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 7

External Baery Packs

Note: To install the second string of baeries, repeat the same procedure on the baery hold down brackets on

the right side of the baery box.

Step 6: Now, it is possible to put all baeries inside the unit by following the below picture (the following drawing

are indicates the wire fastener posions for the correct baery placement).

Note: To install the second string of baeries, repeat the same procedure on the right side of baery box.

Step 7: Connect all baeries following the wiring diagram shown in next chapter.

Step 8: Put all baeries inside and secure in place with hold down brackets.

Note: To install the second string of baeries, repeat the same procedure on the right side of baery box.

Step 9: Put the metal top cover back on the unit. Close the front xing plate and the two parts of the front panel

and secure it with screws.

Step 10: Connect the baery box to the UPS.

P90-BP48

Step 1 : Open the package and place the baery box on a horizontal plane.

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 8

External Baery Packs

Step 2: Remove the removable front panel part by pulling it from the lower extremity

Step 3: Remove the xed part of the front panel by removing the 2 screw present.

Step 4: Remove the metal top cover of the baery box by unscrewing 8 screws present on the two sides (4 on the

right side and 4 on the le side), 3 screws on the top and 4 screws on the back side.

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 9

External Baery Packs

Step 5: Once the baery box is opened, remove the baery hold down brackets present on the le side of the bat-

tery box by unscrewing the 2 screws on each bracket.

Note: To install the second string of baeries, repeat the same procedure on the baery hold down brackets on

the right side of the baery box.

Step 6: Now, it is possible to put all baeries inside the unit by following the below picture (the following drawing

are indicates the wire fastener posions for the correct baery placement).

Note: To install the second string of baeries, repeat the same procedure on the right side of baery box.

Step 7: Connect all baeries following the wiring diagram shown in next chapter.

Xtreme Power Conversion Corporaon

P90-BP36, BP48, BP72 User’s Manual

Page 10

External Baery Packs

Step 8: Put all baeries inside and secure in place with hold down brackets.

Note: To install the second string of baeries, repeat the same procedure on the right side of baery box.

Step 9: Put the metal top cover back on the unit. Close the front xing plate and the two parts of the front panel

and secure it with screws.

Step 10: Connect the baery box to the UPS.

P90-BP72

Step 1 : Open the package and place the baery box on a horizontal plane.

Step 2: Remove the removable front panel part by pulling it from the lower extremity

Step 3: Remove the xed part of the front panel by removing 2 screw present.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Xtreme Power Conversion UPS

Xtreme Power Conversion

Xtreme Power Conversion XPRT-6kVA Guida

Xtreme Power Conversion

Xtreme Power Conversion NXRi-6KL Guida

Xtreme Power Conversion

Xtreme Power Conversion P80 Manuale utente

Xtreme Power Conversion

Xtreme Power Conversion Pure Sine Wave Series Guida

Xtreme Power Conversion

Xtreme Power Conversion M90 Manuale utente

Xtreme Power Conversion

Xtreme Power Conversion NXRT?1000 Guida

Xtreme Power Conversion

Xtreme Power Conversion S70 Line?Interactive Guida

Xtreme Power Conversion

Xtreme Power Conversion Network Xtreme Rack/Tower Series Manuale operativo

Xtreme Power Conversion

Xtreme Power Conversion P90L-ISO6MB Guida

Xtreme Power Conversion

Xtreme Power Conversion 3000 VA P80 Series Guida

Xtreme Power Conversion

Xtreme Power Conversion E90 Series Manuale utente

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Guida

Xtreme Power Conversion

Xtreme Power Conversion P91 Manuale utente

Xtreme Power Conversion

Xtreme Power Conversion P90g Series Guida

Xtreme Power Conversion

Xtreme Power Conversion 20kVA Model Manuale operativo

Xtreme Power Conversion

Xtreme Power Conversion XST?400 Manuale utente

Xtreme Power Conversion

Xtreme Power Conversion XPRT?1000 Manuale operativo

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Guida

Xtreme Power Conversion

Xtreme Power Conversion TX90-1000 Guida

Xtreme Power Conversion

Xtreme Power Conversion M90U Guida

Xtreme Power Conversion

Xtreme Power Conversion P91g Series Guida

Xtreme Power Conversion

Xtreme Power Conversion M90S Series Manuale utente

Xtreme Power Conversion

Xtreme Power Conversion M90S Series Guida

Xtreme Power Conversion

Xtreme Power Conversion XVT?600 Guida

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente