Y.J.E. Display Tech FB057H2-NDBN Manuale utente
B
ASE MODEL :
Y.J.E.DisplayTechCO.,LTD.
SPECIFICATION
FOR
APPROVAL
MODEL:
5.7"OpenFrameLCDMonitor
FB057H2-NDBN
[Customer's Confirmation]
Approved by:
Reviewed by:
Prepared by:
[Supplier's Confirmation]
䗼⪤㠫㗇攎⊶
Y.J.E.DisplayTechCo.,Ltd.
Approved by:
Reviewed by:
Prepared by:
Please return 1 copy for our confirmation with your signature and comments.
1/19
Important safety insturctions
2/19
Product Specification
01. Please read these instructions carefully before using the product and save for later reference.
02. Follow all warnings and instructions marked on the product.
03. Unplug this product from the wall outlet before cleaning. Clean the product with a damp soft
03. cloth. Do not use liquid or aerosol cleaners as it may cause permanent damage to the screen.
04. Do not use this product near water.
05. Do not place this product on an unstable cart, stand, or table.
05. The product may fall, causing serious damage to the product.
06. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure
06. reliable operation of the product and to protect it from overheating, these openings must not be
06. blocked or covered.
06. The openings should never be placed near or over a radiator or heat register, or in a built-in
06. installation unless proper ventilation is provided.
07. This product should be operated from the type of power indicated on the marking label.
07. If you are not sure of the type of power available, consult your dealer or local power company.
08. This product is equipped with a 3-wire grounding type plug, a plug having a third (grounding) pin.
08. This plug will only fit into a grounding-type power outlet.
08. This is a safety feature. If you are unable to insert the plug into the outlet, contact your
08. electrician to replace your obsolete outlet.
08. Do not defeat the purpose of the grounding-type plug.
09. Do not allow anything to rest on the power cord.
09. Do not locate this product where persons will walk on the cord.
10. If an extension cord is used with this product, make sure that the total of the ampere ratings on
10. the products plugged into the extension cord does not exceed the extension cord ampere rating.
10. Also make sure that the total of all products plugged into the wall outlet does not exceed
10. 15 amps.
11. Never push objects of any kind into this product through cabinet slots as they may touch
11. dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
11. Never spill liquid of any kind on the product.
12. Do not attempt to service this product yourself, as opening or removing covers may expose you to
12. dangerous voltage points or other risks and will void the warranty.
12. Refer all servicing to qualified service personnel.
13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under
13. the following conditions:
13. a. When the power cord or plug is damaged or frayed.
13. b. If liquid has been spilled into the product.
13. c. If the product has been exposed to rain or water.
13. d. If the product does not operate normally when the operating instructions are followed.
13. d. Adjust only those controls that are covered by the operating instructions since improper
13. d. adjustment of other controls may result in damage and will often require extensive work
13. d. by a qualified technician to restore the product to normal operation.
13. e. If the product has been dropped or the cabinet has been damaged.
13. f. If the product exhibits a distinct change in performance, indicating a need for service.
First Edition for Customer
3/19
Product Specification
Record of Revision
Version & Date Page Old Description New Description
2015/5/20 All
Cover
Important safety insturctions
Record of Revision
Contents
1. Introduction
(1) Features
(2) Notice
(3) Check list
2. Installing the monitor
(1) Power & Signal connections
(2) Optional cable connections
(3) Dimensions
3. Using VGA LCD monitor
(1) Key definition
(2) Setup for Operation
(3) OSD menu system
4. Cleaning the monitor
5. Disclaimer
6. Trouble shooting
7. Specifications
Contents
4/19
Product Specification
No. Item Page
01
02
03
04
18
05
05
05
05
06
06
19
06
07
08
08
09
10
17
17
1. Introduction
1.1 Features
ΗHigh contrast color TFT-LCD Monitor support resolution up to 640*480.
ΗPower management system conforms to VESA DPMS and EPA Energy Star standards.
ΗFull consideration for touch screen installation and application.
ΗUniversal Power adapter.
ΗSupport DDC1 & DDC2B for Plug & Play compatibility.
ΗAdvanced OSD control for picture quality adjustment.
ΗDetachable stand for wall-mounting adjustment.
ΗHeavy duty monitor with steel frame.
ΗCustom design by request.
1.2 Notice
Product Specification
ΗDo not touch the LCD panel surface with sharp or hard objects.
ΗDo not use abrasive cleaners, waxes or solvents for cleaning, use only a dry or damp,
Ηsoft cloth.
ΗUse only with a high quality, safety-approved, AC/DC power adapter.
1.3 Check List
1 LCD monitor, 5.7" x1
2 Power cord, L=1.8m x1
3 VGA Cable, L=1.8m x1
4 Adapter x1
If any items are missing or damaged, please contact your dealer immediately.
Before using this monitor, please make sure that all the items listed below are present in your
package. Analog color TFT LCD monitor Accessory Box containing:
5/19
2. Installing the Monitor
The procedures for setting up your TFT LCD monitor are as followings:
2.1 Power & Signal connections
6/19
Product Specification
2.2 Optional cable connections
The LCD monitor is designed to work with a variety of compatible video sources. Due to possible
deviations between these video sources, you may have to make adjustments to the monitor settings
from the OSD menu when switching between these sources.
These adjustments are made from the OSD menu.
2.1.1 Power
Switch off the power of your monitor and computer.
The Power Switch is located on in the center of the monitor.
2.1.2 Power cable connection
Connect the power cord to the AC outlet, and connect the power to the monitor through the AC/DC
adapter.
2.1.3 VGA cable connection
Plug 15-pin VGA signal cable to the VGA connector in the rear of PC system, and plug the other end to
the monitor. Secure cable connectors with screws.
2.3 Dimensions
Product Specification
7/19
3. Using VGA LCD Monitor
3.1 Key Definition
Product Specification
OSD KEY Function
Down / value decrease
Х/ШUp / value increase
Power Power ON / OFF
Menu Menu Select
Auto Auto Adjust
Ц/Ч
8/19
3.2 Setup for Operation
Description
Contrast Adjust the contrast of the screen.
Brightness Adjust the brightness of the screen.
Color Adjust Choose "User color" can use to set value of Red/Green/Blue.
Color Temp Set color to 9300 , 6500 , 5500 , sRGB, User Color .
Clock Adjust frequency to fill display.
Phase Adjust the phase control of the image.
Gamma Adjust the value of GAMMA.
OSD H. Pos. Factory preset, OSD Horizontal Position.
OSD V. Pos. Factory preset, OSD Vertical Position.
OSD Timer It can adjust OSD display time.
Aspect Ratio Setting aspect ratio on or off.
Reset Return to factory original setting.
9/19
OSD MENU
Language
Misc.
Product Specification
Select one of the 7 languages.
(English, Français, Deutsch, Español, Japanese, Chinese Tradition,
Chinese Sim
p
le
)
This functuon allows the user to optimize the sharpness of the
image.
Auto Adjustment
Automatically adjust the horizontal position, vertical position,
horizontal size and phase Windows background or characters
should display on your full screen after proceed this function.
Image Setting
OSD Menu
Sharpness
The OSD (On Screen Display) menu enables user to manipulate the image and settings OSD Main
menu consists of source:
Color
Product Specification
3.3 OSD menu system
[Color]
Press "+" to increase or "-" to decrease the
brightness, contrast or color adjust or color temp.
Ⴠ
Contrast
Adjust the contrast of the screen.
Ⴠ
Brightness
Adjust the brightness of the screen.
Ⴠ
Color Adjust
Ⴠ
Color Temp
Set color to 9300 , 6500 , 5500 , sRGB, USER .
(Notice: please do color temp setting first.
After finish color temp, then do color adjust.)
Choose "USER" option can set value of
Red/Green/Blue.
You can select the screen’s color level of the white
color field from the default color temperature
settings.
Also, you can fine tune the color temperature by
USER option if necessary.
10/19
Indice
