Yanmar YD42 Manuale utente
en English
OPERATION
MANUAL
COLOR DISPLAY
YD42
Preface
Disclaimer
All information, illustrations and specifications in this manual are
based on the latest information available at the time of publishing.
The illustrations used in this manual are intended as representative
reference views only. Moreover, because of our continuous product
improvement policy, we may modify information, illustrations
and/or specifications to explain and/or exemplify a product, service
or maintenance improvement. We reserve the right to make any
change at any time without notice. Yanmar is a registered
trademark of YANMAR CO., LTD. in Japan, the United States and/or
other countries.
All rights reserved
No part of this publication may be reproduced or used in any form
by any means - graphic, electronic, or mechanical, including
photocopying, recording, taping, or information storage and
retrieval systems - without the written permission of YANMAR CO.,
LTD.
Please review and comply with the applicable laws and regulations
of the international export control regimes at the territory or
country where the product and manual are intended to be
imported and used.
Copyright
All Rights Reserved, Copyright YANMAR CO., LTD.
Warranty
Refer to the Yanmar Limited Warranty Handbook for a complete
warranty description.
Compliance statement
Yanmar declare under our sole responsibility that the product
conforms with the requirements of:
•CE under EMC Directive 2014/30/EU
•Level 2 devices of the Radio communications (Electromagnetic
Compatibility) standard 2017
Preface | YD42 Operation Manual 3
Warning
The user is cautioned that any changes or modifications not
expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
About this manual
This manual is a reference guide for operating the unit. It assumes
that all equipment is installed and configured, and that the system
is ready to use.
Some features may not be activated or available for screenshots in
the manual. As a result, screenshots of menus and dialogs may not
match the look of your unit.
Important text that requires special attention from the reader is
emphasized as follows:
ÚNote: Used to draw the reader’s attention to a comment or
some important information.
Warning: Used when it is necessary to warn
personnel that they should proceed carefully to
prevent risk of injury and/or damage to equipment/
personnel.
4Preface | YD42 Operation Manual
Contents
7 Basic operation
7Front panel and keys
8 Turning the unit on and off
8 Menus
8 Editing a value
9 Display setup
10 Selecting a page
12 Pages
12 Static gauge
12 Changing page data
13 Missing or faulty data
13 Predefined pages
22 Fuel
22 Requirements
22 Calibrate
22 Fuel management
23 Adding fuel
23 Fuel used
25 Alarms
25 System alarms
25 Engine alarms
26 The alarms dialog
29 Trip log
29 Accessing the trip log
29 Trip 1
29 Trip 2
30 Log
31 User settings
31 Accessing the settings dialog
31 Pages
34 Calibration
34 Damping
Contents | YD42 Operation Manual 5
35 AIS
37 Software setup
37 Software setup sequence
37 Accessing the system settings dialog
37 Network settings
40 Units settings
40 Decimal places
40 Key beeps
40 Language
41 Time
41 Display setup
42 Files
42 Simulate
42 Restore defaults
42 Engine setup
43 Global reset
43 About
44 Files
44 USB mass storage device
44 Accessing the files dialog
44 Software update
46 Import system settings
46 Export system settings
47 Maintenance
47 Preventive maintenance
47 Cleaning the display unit
48 Dimensional drawings
49 Technical specifications
50 Supported data
50 NMEA 2000
52 J1939
6Contents | YD42 Operation Manual
Basic operation
Front panel and keys
A Pages key
With no menu active:
•Press to scroll through the enabled pages
•Press and hold to display a list of enabled pages from
where you can select directly the page to display
Menu and dialog operation:
•Press to return to previous menu level or to exit a dialog
B Arrow keys
•Press to move up and down in menus and dialogs
•Press to adjust a value
C Enter key
•Press to select a menu option and to enter the next menu
level
•Press to activate/deactivate a menu/dialog option
D Menu/Backlight key
•Press once to display the page menu
•Double-press to display the settings dialog
•Press and hold to open the display setup dialog from
where you can adjust the backlight
1
Basic operation | YD42 Operation Manual 7
Turning the unit on and off
The unit is turned on by the power ON wire. Refer to the installation
documentation for more information.
It is possible to put the unit in sleep mode, refer to "Displaysetup" on
page 9.
Switch off the main power supply to turn the unit off.
First time startup
When the unit is started for the first time, or after a factory default,
the unit displays a series of dialogs. Respond to the dialog prompts
to make fundamental settings.
You can perform further setup and later change settings using the
system settings dialogs.
Menus
Not all pages have a page specific menu (A), but all page menus
give access to the Settings dialog.
Activate the menu by pressing the Menu key from any page.
To navigate the menu:
•Use the arrow keys
To confirm a selection:
•Press the enter key
To return to the previous menu level:
•Press the pages key
Editing a value
1. Press the enter key to turn the field into edit mode
8Basic operation | YD42 Operation Manual
- The left digit starts flashing
2. Use the arrow keys to set the value for the flashing digit
3. Press the enter key to move focus to the next digit
4. Repeat step 3 and 4 until all digits are set
5. Press the enter key to leave edit mode for the selected field
Selectedfield Fieldineditmode
To cancel editing or leave a dialog:
•Press the pages key
•Press the menu key
Display setup
The display setup can be adjusted at any time from the Display
setup dialog.
To access the dialog:
•Press and holding the menu key
Backlight level
Adjusts the backlight level.
When the dialog is active, you can cycle the preset backlight levels
by short presses on the menu key.
Basic operation | YD42 Operation Manual 9
Night mode
Activates/deactivates the night mode color palette.
Night mode color
Sets the night mode color palette.
Invert day color
Changes the background color for the pages from default black to
white.
Sleep mode
In Sleep mode, the backlight for the screen and keys are turned off
to save power. The system continues to run in the background.
To exit Sleep mode:
•Press the menu key
Selecting a page
Scrolling through enabled pages
To scroll through the enabled data pages:
•Press the pages key
10 Basic operation | YD42 Operation Manual
Altri manuali per YD42
3
Indice
Altri manuali Yanmar Monitor
