Yard Works 060-3890-8 Manuale utente
IMPORTANT:
Read and follow all safety rules and
operating instructions before using
this product.
Electric Blower
Toll-free: 1-866-523-5218
Instruction Manual
model no. 060-3890-8
IMPORTANT:
Read and follow all safety rules and
operating instructions before using
this product.
3084514
Conforms to UL STD 1017
Certified to CAN/CSA STD.
C22.2 No. 147-M90
model no. 060-3890-8 | contact us: 1.866.523.5218
2
Table of ContentsSpecifications
ELECTRIC BLOWER
Type Corded
Voltage 120 V~60 Hz
Amp 8 A
Max Air Speed 160 MPH
Max Air Volume 160 CFM 4.5 m3/min
Weight 4 lb (1.8 kg)
Specifications 2
Know Your Blower 3
Exploded View 4
Parts List 5
Assembly 6
Operation 8
Maintenance 10
Troubleshooting 11
Symbols 12
Electrical Information 13
Important Safety Instructions 15
General Safety Rules 17
Warranty 18
model no. 060-3890-8 | contact us: 1.866.523.5218
3
Know Your Blower
KNOW YOUR BLOWER
The safe use of this product requires an understanding of the information on the
tool and in this operator’s manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself with all operating
features and safety rules.
BLOWER TUBE: The blower tube can be easily installed on the blower
without any additional tools.
CORD RETAINER: A convenient cord retainer helps keep the
extension cord connection secure during blower operation.
SINGLE SPEED: This blower is equipped with a single-speed motor.
3
4
1
2
1. ON/OFF switch
2. Blower tube
3. Cord retainer
4. Plug
model no. 060-3890-8 | contact us: 1.866.523.5218
4
Exploded View
1
2
3
4
5
6
7
8
9
1013 1112
model no. 060-3890-8 | contact us: 1.866.523.5218
5
Parts List
Item Description QTY
1 Blower tube 1
2 Right motor housing assembly 1
3 Motor assembly 1
4 Wire 1
5 Micro-switch 1
6 Switch button 1
7 Built-in plug 1
8 Left motor housing 1
9 Shaft spacer 1
10 Heat output fan blade 1
11 Fan blade 1
12 Pressure pad 3
13 Nut 1
model no. 060-3890-8 | contact us: 1.866.523.5218
6
Assembly
!WARNING: Do not use this product if any parts on the
Packing List are already attached to your product when
you unpack it. Parts on this list are not attached to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious
personal injury.
UNPACKING
This product requires assembly.
• Carefully remove the product and any accessories from the box. Make sure that all
items listed in the packing list are included.
• Inspect the product carefully to make sure no breakage or damage occurred during
shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily
operated the product.
• If any parts are damaged or missing, please call customer service for assistance.
PACKING LIST
Blower
Blower Tube
Operator’s Manual
7
Assembly
model no. 060-3890-8 | contact us: 1.866.523.5218
ASSEMBLING THE BLOWER TUBE
Slide blower tube forward until the lock button clicks into the top of the tube.
1. Air outlet
2. Lock button
3. Blower tube
3
1
2
!WARNING: Do not connect to power supply until assembly
is complete. Failure to comply could result in accidental
starting and possible serious personal injury.
!WARNING: Do not attempt to modify this product or create
accessories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
!WARNING: If any parts are damaged or missing do not operate this product until the
parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
model no. 060-3890-8 | contact us: 1.866.523.5218
8
APPLICATIONS
You may use this product for the purposes listed below:
• Clearing leaves and other yard debris from your lawn.
• Keeping decks, patios, garages and driveways free from leaves, pine needles and other
debris.
STARTING/STOPPING THE BLOWER
• Attach the outlet end of an extension cord to the plug on the rear of the blower.
NOTE: Use only an approved outdoor extension cord as described previously in this
manual.
• Route the extension cord through the side of the loop located on the rear of the blower
housing and place underneath the cord retainer.
• To start the blower, move the power switch to the ON position.
• To stop the blower, move the power switch to the OFF position.
Operation
1
2
3
4
1. Cord retainer
2. Loop
3. Plug
4. Extension cord
model no. 060-3890-8 | contact us: 1.866.523.5218
9
OPERATING THE BLOWER
• To keep from scattering debris, blow around
the outer edges of a debris pile. Never blow
directly into the centre of a pile.
• To reduce sound levels, limit the number
of pieces of equipment used at any one
time.
• Use rakes and brooms to loosen debris
before blowing. In dusty conditions, slightly
dampen surfaces if water is available.
• Watch out for children, pets, open windows,
or freshly washed cars, and blow debris
safely away.
• Hold the blower with the handle in your right
hand.
• Operate power equipment at reasonable
hours only — not early in the morning
or late at night when people might be
disturbed. Comply with the times listed in
local ordinances.
• After using blowers or other equipment,
CLEAN UP! Dispose of debris properly.
Operation
!WARNING: Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories not
recommended can result in serious personal injury.
!WARNING: Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into your
eyes, resulting in possible serious injury.
!WARNING: Do not allow familiarity with products to make you careless.
Remember that a careless fraction of a second is sufficient to inflict serious
injury.
10
Maintenance
model no. 060-3890-8 | contact us: 1.866.523.5218
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use. Use clean
cloths to remove dirt, dust, oil, grease, etc.
STORAGE (1 MONTH OR LONGER)
• Clean all foreign materials from the blower.
• Store indoors in a place that is out of reach of children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
!WARNING: Before inspecting, cleaning or servicing
the machine, unplug the power cord and wait for
all moving parts to stop. Failure to follow these
instructions can result in serious personal injury
or property damage.
!WARNING: Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes, resulting in possible serious injury.
!WARNING: When servicing, use only identical replacement parts. Use of
any other parts may create a hazard or cause product damage.
Indice
Altri manuali Yard Works Soffiatore
Yard Works
Yard Works 060-3874-8 Manuale utente
Yard Works
Yard Works 60-3869-2 Manuale utente
Yard Works
Yard Works AERO FORCE 060-3775-4 Manuale utente
Yard Works
Yard Works 060-3874-8 Manuale utente
Yard Works
Yard Works 060-2392-0 Manuale utente
Yard Works
Yard Works 060-3893-2 Manuale utente
Yard Works
Yard Works 60-3857-0 Manuale utente
Yard Works
Yard Works 274-1755-6 Manuale utente
Yard Works
Yard Works 60-3845-8 Manuale utente
Yard Works
Yard Works 060-3874-8 Manuale utente
Yard Works
Yard Works 60-3856-2 Manuale utente
Yard Works
Yard Works LB23020-1 Manuale utente
Yard Works
Yard Works 060-2374-4 Manuale utente
Yard Works
Yard Works 060-2385-8 Manuale utente
Yard Works
Yard Works GBV140SU1 Manuale utente
Yard Works
Yard Works 060-3891-6 Manuale utente
Yard Works
Yard Works 60-3866-8 Manuale utente
Yard Works
Yard Works 267-2929 Manuale utente
Yard Works
Yard Works 267-4931 Manuale utente
Yard Works
Yard Works 60-3856-2 Manuale utente
