YASKAWA MOTOMAN FS100 Manuale utente

MANUAL NO.RE-CHO-A111

Part Number: 159645-1CD

Revision: 5

FS100

MAINTENANCE MANUAL

Upon receipt of the product and prior to initial operation, read these instructions thoroughly, and

retain for future reference.

MOTOMAN INSTRUCTIONS

MOTOMAN- INSTRUCTIONS

FS100 INSTRUCTIONS

FS100 OPERATOR’S MANUAL

FS100 MAINTENANCE MANUAL

The FS100 OPERATOR’S MANUAL above is applicable to both FS100 and FS100L controllers.

1 of 348

159645-1CD

RE-CHO-A111

FS100

YASKAWA customers to assist in the operation of Motoman robots,

related equipment and software This manual is copyrighted property of

YASKAWA and may not be sold or redistributed in any way. You are

welcome to copy this document to your computer or mobile device for

easy access but you may not copy the PDF files to another website, blog,

cloud storage site or any other means of storing or distributing online

content.

Printed in the United States of America

First Printing, 2012

YASKAWA America, Inc.

Motoman Robotics Division

100 Automation Way

Miamisburg, OH 45342

Phone: 937-847-6200

www.motoman.com

2 of 348

iii

159645-1CD

RE-CHO-A111

FS100

MANDATORY

• This manual explains maintenance procedures of the FS100

system. Read this manual carefully and be sure to understand its

contents before handling the FS100.

• General items related to safety are listed in Chapter 1: Safety of the

FS100 INSTRUCTIONS. To ensure correct and safe operation,

carefully read the FS100 Instructions before reading this manual.

CAUTION

• Some drawings in this manual are shown with the protective covers

or shields removed for clarity. Be sure all covers and shields are

replaced before operating this product.

• The drawings and photos in this manual are representative

examples and differences may exist between them and the

delivered product.

• YASKAWA may modify this model without notice when necessary

due to product improvements, modifications, or changes in

specifications. If such modification is made, the manual number will

also be revised.

• If your copy of the manual is damaged or lost, contact a YASKAWA

representative to order a new copy. The representatives are listed

on the back cover. Be sure to tell the representative the manual

number listed on the front cover.

• YASKAWA is not responsible for incidents arising from unauthorized

modification of its products. Unauthorized modification voids your

product’s warranty.

3 of 348

159645-1CD

RE-CHO-A111

FS100

We suggest that you obtain and review a copy of the ANSI/RIA National

Safety Standard for Industrial Robots and Robot Systems (ANSI/RIA

R15.06-2012). You can obtain this document from the Robotic Industries

Association (RIA) at the following address:

Robotic Industries Association

900 Victors Way

P.O. Box 3724

Ann Arbor, Michigan 48106

TEL: (734) 994-6088

FAX: (734) 994-3338

www.roboticsonline.com

Ultimately, well-trained personnel are the best safeguard against

accidents and damage that can result from improper operation of the

equipment. The customer is responsible for providing adequately trained

personnel to operate, program, and maintain the equipment. NEVER

ALLOW UNTRAINED PERSONNEL TO OPERATE, PROGRAM, OR

REPAIR THE EQUIPMENT!

We recommend approved YASKAWA training courses for all personnel

involved with the operation, programming, or repair of the equipment.

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications.

4 of 348

159645-1CD

RE-CHO-A111

Notes for Safe Operation

FS100

Notes for Safe Operation

Read this manual carefully before installation, operation, maintenance, or

inspection of the FS100 .

In this manual, the Notes for Safe Operation are classified as “DANGER”,

“WARNING”, “CAUTION”, “MANDATORY”, or “PROHIBITED”.

Even items described as “CAUTION” may result in a serious accident in

some situations.

At any rate, be sure to follow these important items.

DANGER

Indicates an imminent hazardous

situation which, if not avoided, could

result in death or serious injury to

personnel.

WARNING

Indicates a potentially hazardous

situation which, if not avoided, could

result in death or serious injury to

personnel.

CAUTION

Indicates a potentially hazardous

situation which, if not avoided, could

result in minor or moderate injury to

personnel and damage to

equipment. It may also be used to

alert against unsafe practices.

MANDATORY

Always be sure to follow explicitly

the items listed under this heading.

PROHIBITED

Must never be performed.

NOTE

To ensure safe and efficient operation at all times, be sure

to follow all instructions, even if not designated as

“DANGER”, “WARNING” and “CAUTION” .

5 of 348

Notes for Safe Operation

159645-1CD

RE-CHO-A111

FS100

WARNING

• Before operating the manipulator, check that servo power is turned

OFF when the emergency stop button on the programming pendant

is pressed.

When the servo power is turned OFF, the SERVO ON LED on the

programing pendant is turned OFF.

Injury or damage to machinery may result if the emergency stop circuit

cannot stop the manipulator during an emergency. The manipulator

should not be used if the emergency stop button does not function.

Fig. : Emergency Stop Button

• In the case of not using the programming pendant, be sure to

supply the emergency stop button on the equipment. Then before

operating the manipulator, check to be sure that the servo power is

turned OFF by pressing the emergency stop button.

Connect the external emergency stop button to the 5-6 pin and 16-

17 pin of the robot system signal connector (CN2).

• Upon shipment of the FS100, this signal is connected by a jumper

cable in the dummy connector. To use the signal, make sure to

supply a new connector, and then input it.

If the signal is input with the jumper cable connected, it does not

function, which may result in personal injury or equipment damage.

• Once the emergency stop button is released, clear the cell of all

items which could interfere with the operation of the manipulator.

Then turn the servo power ON.

Injury may result from unintentional or unexpected manipulator motion.

Fig. : Release of Emergency Stop Button

• Observe the following precautions when performing teaching

operations within the manipulator’s operating range:

– Be sure to use a lockout device to the safeguarding when going

inside. Also, display the sign that the operation is being

performed inside the safeguarding and make sure no one closes

the safeguarding.

– View the manipulator from the front whenever possible.

– Always follow the predetermined operating procedure.

– Ensure that you have a safe place to retreat in case of

emergency.

Improper or unintended manipulator operation may result in injury.

TURN

6 of 348

vii

159645-1CD

RE-CHO-A111

Definition of Terms Used Often in This Manual

FS100

Definition of Terms Used Often in This Manual

The MOTOMAN is the YASKAWA industrial robot product.

The MOTOMAN usually consists of the manipulator, the FS100 controller,

manipulator cables, the FS100 programming pendant (optional), and the

FS100 programming pendant dummy connector (optional).

In this manual, the equipment is designated as follows:

CAUTION

• Confirm that no person is present in the manipulator’s operating

range and that you are in a safe location before:

– Turning ON the power for the FS100.

– Moving the manipulator with the programming pendant.

– Running the system in the check mode.

– Performing automatic operations.

Injury may result if anyone enters the manipulator’s operating range

during operation. Always press an emergency stop button immediately

if there are problems.

The emergency stop button is located on the programing pendant.

CAUTION

• Perform the following inspection procedures prior to teaching the

manipulator. If problems are found, correct them immediately, and

be sure that all other necessary tasks have been performed.

– Check for problems in manipulator movement.

– Check for damage to the insulation and sheathing of external

wires.

• Return the programming pendant to a safe place after use.

If the programming pendant is inadvertently left on the manipulator,

on a fixture, or on the floor, the manipulator or a tool may collide with

the programming pendant during manipulator movement, which may

result in personal injury or equipment damage.

• Read and understand the Explanation of Warning Labels in the

FS100 Instructions before operating the manipulator.

Equipment Manual Designation

FS100 controller FS100

FS100 programming pendant Programming pendant

Cable between the manipulator and

the controller

Manipulator Cable

FS100 programming pendant

dummy connector

Programming pendant

dummy connector

7 of 348

Description of the Operation Procedure

viii

159645-1CD

RE-CHO-A111

FS100

Descriptions of the programming pendant keys, buttons, and displays are

shown as follows:

Description of the Operation Procedure

In the explanation of the operation procedure, the expression "Select • • • "

means that the cursor is moved to the object item and the SELECT key is

pressed, or that the item is directly selected by touching the screen.

Registered Trademark

In this manual, names of companies, corporations, or products are

trademarks, registered trademarks, or brand names for each company or

corporation. The indications of (R) and TM are omitted.

Equipment Manual Designation

Programming

Pendant

Character Keys The keys which have characters printed on

them are denoted with [ ].

ex. [ENTER]

Symbol Keys The keys which have a symbol printed on

them are not denoted with [ ] but depicted

with a small picture.

ex. PAGE key

The Cursor is an exception, and a picture is

not shown.

Axis Keys

Numeric Keys

“Axis Keys” and “Numeric Keys” are generic

names for the keys for axis operation and

number input.

Keys pressed

simultaneously

When two keys are to be pressed

simultaneously, the keys are shown with a

“+” sign between them,

ex. SHIFT key +COORD key

Mode Key Three kinds of modes that can be selected

by the mode key are denoted as follows:

REMOTE, PLAY, or TEACH

Button Three buttons on the upper side of the

programming pendant are denoted as

follows:

HOLD button

START button

EMERGENCY STOP button

Displays The menu displayed in the programming

pendant is denoted with { }.

ex. {JOB}

PC Keyboard The name of the key is denoted

ex. Ctrl key on the keyboard

GO BACK

PAGE

SHIFT

TOOL SEL

COORD

8 of 348

159645-1CD

RE-CHO-A111

Explanation of Warning Labels

FS100

Explanation of Warning Labels

DANGER

• The label described below is attached to the manipulator.

Observe the precautions on the warning labels.

Failure to observe this caution may result in injury or damage to

equipment.

Fig. : Warning Labels

• The following warning labels are attached to FS100.

Observe the precautions on the warning labels.

Failure to observe this warning may result in injury or damage to

equipment.

Fig. : Location of Warning Labels

WARNING Label B:

WARNING Label A:

WARNING

Do not enter

robot

work area.

WARNING

Moving parts

may cause

injury

Heavy Object Warning NP

Electric Shock Warning NP

Top View

Front View

9 of 348

Safeguarding Tips

159645-1CD

RE-CHO-A111

FS100

Safeguarding Tips

All operators, programmers, maintenance personnel, supervisors, and

anyone working near the system must become familiar with the operation

of this equipment. All personnel involved with the operation of the

equipment must understand potential dangers of operation. General

safeguarding tips are as follows:

• Improper operation can result in personal injury and/or damage to

the equipment. Only trained personnel familiar with the operation of

this equipment, the operator's manuals, the system equipment, and

options and accessories should be permitted to operate this

equipment.

• Improper connections can damage the equipment. All connections

must be made within the standard voltage and current ratings of the

equipment.

• The system must be placed in Emergency Stop (E-Stop) mode

whenever it is not in use.

• In accordance with ANSI/RIA R15.06-2012, section 4.2.5, Sources of

Energy, use lockout/tagout procedures during equipment

maintenance. Refer also to Section 1910.147 (29CFR, Part 1910),

Occupational Safety and Health Standards for General Industry

(OSHA).

Mechanical Safety Devices

The safe operation of this equipment is ultimately the users responsibility.

The conditions under which the equipment will be operated safely should

be reviewed by the user. The user must be aware of the various national

codes, ANSI/RIA R15.06-2012 safety standards, and other local codes

that may pertain to the installation and use of this equipment.

Additional safety measures for personnel and equipment may be required

depending on system installation, operation, and/or location. The following

safety equipment is provided as standard:

• Safety barriers

• Door interlocks

• Emergency stop palm buttons located on operator station

Check all safety equipment frequently for proper operation. Repair or

replace any non-functioning safety equipment immediately.

10 of 348

Altri manuali per MOTOMAN FS100

Indice

Altri manuali YASKAWA Controllori

YASKAWA

YASKAWA Z1000 CIMR-ZU*A Series Manuale utente

YASKAWA

YASKAWA CIPR-GA50C series Manuale del proprietario

YASKAWA

YASKAWA CIMR-JA Series Manuale di installazione e funzionamento

YASKAWA

YASKAWA PROFINET V1000 Manuale utente

YASKAWA

YASKAWA MOTOMAN FS100 Manuale utente

YASKAWA

YASKAWA MP Series Nota di rilascio

YASKAWA

YASKAWA Motoman DX200 Manuale utente

YASKAWA

YASKAWA SGD7S series Manuale utente

YASKAWA

YASKAWA VIPA System 300S+ Manuale utente

YASKAWA

YASKAWA Motoman DX200 Manuale utente

YASKAWA

YASKAWA FSDrive-MV1000 Series Manuale utente

YASKAWA

YASKAWA CIMR-VU series Manuale utente

YASKAWA

YASKAWA MP3000 Series Guida utente

YASKAWA

YASKAWA MOTOMAN FS100 Manuale utente

YASKAWA

YASKAWA J1000 CIMR-JC series Manuale utente

YASKAWA

YASKAWA mp2500 Manuale utente

YASKAWA

YASKAWA yasnac lx3 Manuale utente

YASKAWA

YASKAWA 1000-Series Manuale utente

YASKAWA

YASKAWA CIPR-GA50C series Manuale utente

YASKAWA

YASKAWA Motoman DX200 Manuale utente

YASKAWA

YASKAWA MOTOMAN FS100 Manuale utente

YASKAWA

YASKAWA J1000 CIMR-JC series Manuale utente

YASKAWA

YASKAWA A1000 HHP Manuale del proprietario

YASKAWA

YASKAWA iQpump 7 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

3M MicroTouch EX113 Manuale utente