YASKAWA S Series Manuale utente

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

°",.1W-ArAgmFl°5F4'.

-T7-7-Ace2-S,-4K1447n ?Mgas-VAt

ESeries SGM /SGDB

USER'S MANUAL

AC Servodrives

SGMG/SGMS/SGMD/SGMP Servomotors

SGDB-N SERVOPACK

YASKAWA MANUAL NO. SIE-S800-26.4B

Safety Information

The following conventions are used to indicate precautions in this manual. Failure to heed precau-

tions provided in this manual can result in serious or possibly even fatal injury or damage to the prod-

ucts or to related equipment and systems.

A WARNING

A CAUTION

©Yaskawa, 1998

Indicates precautions that, if not heeded, could possibly result in loss of life or

serious injury.

Indicates precautions that, if not heeded, could result in relatively serious or minor

injury, damage to the product, or faulty operation.

any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior writ-

ten permission of Yaskawa. No patent liability is assumed with respect to the use of the information contained

herein. Moreover, because Yaskawa is constantly striving to improve its high-quality products, the information

contained in this manual is subject to change without notice. Every precaution has been taken in the preparation

of this manual. Nevertheless, Yaskawa assumes no responsibility for errors or omissions. Neither is any liability

assumed for damages resulting from the use of the information contained in this publication.

iii

OVERVIEW

Overview

Safety Precautions xiv

Safety Precautions xiii

1Configuration and Models

1.1 Configuration 1 -2

1.2 Model Numbers 1 -2

2Ratings and Characteristics

2.1 Ratings and Specifications of SGMG Servomotors

for Rated Speed 1500 r/min 2 -2

2.2 Ratings and Specifications of SGMG Servomotors

for Rated Speed 1000 r/min 2 -6

2.3 SGMS Servomotor Ratings and Specifications 2 -10

2.4 SGMD Servomotor Ratings and Specifications

(with Holding Brake) 2 -13

2.5 SGMP Servomotor (1.5 kW) Ratings and Specifications 2 -15

2.6 SERVOPACK Ratings and Specifications 2 -17

2.7 Combined Specifications 2 -19

3Servodrive Characteristics

3.1 Overload Characteristics 3 -2

3.2 Starting and Stopping Time 3 -3

3.3 Allowable Repeatability 3 -4

3.4 Large-amplitude Frequency Characteristics 3 -6

3.5 Mechanical Characteristics 3 -7

4Configuration and Connections

4.1 Internal Connection Diagram 4 -3

4.2 Name and Description of Main Circuit Terminals 4 -7

4.3 Applicable Receptacles 4 -7

4.4 Connecting an Incremental Encoder 4 -9

4.5 Connecting an Absolute Encoder 4 -14

4.6 Output Circuits 4 -18

4.7 Connector Terminal Block Converter Unit for 1CN 4 -19

4.8 2CN Encoder Connector Terminals 4 -22

4.9 4CN Connectors for MECHATROLINK Communications 4 -26

5Application

5.1 Turning Power ON/OFF 5 -3

5.2 Position Control 5 -4

5.3 Setting Up a 12-bit Absolute Encoder 5 -6

5.4 Protection Functions 5 -8

5.5 Indications 5 -9

5.6 Precautions 5 -10

5.7 Application Precautions 5 -13

5.8 Appropriate Applications 5 -18

5.9 Adjustments 5 -19

6MECHATROLINK Communication

6.1 Specifications and Configuration 6 -2

6.2 1SW Rotary Switch for MECHATROLINK Station

Address Settings 6 -3

6.3 MECHATROLINK Command List 6 -4

6.4 Special Descriptions 6 -7

6.5 Power ON Sequence (Communications Sequence) 6 -15

6.6 List of Alarm and Warning Codes 6 -18

7User Constants

7.1 Setting User Constants 7 -2

7.2 List of User Constants 7 -13

7.3 Memory Switch Bit Details 7 -16

7.4 Limits to User Constant Changes 7 -22

7.5 Procedure for Transferring User Constants 7 -23

8Installation and Wiring

8.1 Checking on Delivery 8 -2

8.2 Installation 8 -3

8.3 Wiring Specifications 8 -7

9Servodrives Dimensional Drawings

9.1 AC Servomotors 9 -3

9.2 SERVOPACKS 9 -53

9.3 Cables 9 -64

9.4 Connectors 9 -75

9.5 Noise Filters 9 -94

9.6 Peripheral Devices 9 -96

10 Trial Operation

10.1 Check Items before Trial Operation 10 -2

10.2 Trial Operation Procedure 10 -3

11 Settings

11.1 Characteristics when Shipped 11 -2

11.2 Resetting 11 -2

11.3 Adjusting Servo Performance 11 -2

12 Maintenance and Inspection

12.1 Maintenance and Inspection of Servodrives 12 -2

12.2 Troubleshooting 12 -5

TABLE OF CONTENTS

Overview

Safety Precautions

Configuration and Models

1.1 Configuration

1.2 Model Numbers

xiv

-2

1.2.1 Servomotor Model Numbers 1-2

1.2.2 SERVOPACK Model Numbers 1-4

2Ratings and Characteristics

2.1 Ratings and Specifications of SGMG Servomotors

for Rated Speed 1500 r/min 2-2

2.1.1 Ratings and Specifications 2 -2

2.2 Ratings and Specifications of SGMG Servomotors

for Rated Speed 1000 r/min 2 -6

2.2.1 Ratings and Specifications 2-6

3.1 Overload Characteristics 3-2

3.2 Starting and Stopping Time 3-3

3.3 Allowable Repeatability 3 -4

3.3.1 Allowable Repeatability as Limited by the Servomotor 3 -4

TABLE OF CONTENTS

2.3 SGMS Servomotor Ratings and Specifications 2 -10

2.3.1 Ratings and Specifications 2 -10

2.4 SGMD Servomotor Ratings and Specifications

(with Holding Brake) 2 -13

2.4.1 Ratings and Specifications 2 -13

2.5 SGMP Servomotor (1.5 kW) Ratings and Specifications 2 -15

2.5.1 Ratings and Specifications 2 -15

2.6 SERVOPACK Ratings and Specifications 2 -17

2.6.1 Ratings and Specifications 2 -17

2.7 Combined Specifications 2 -19

2.7.1 Standard Combinations 2 -19

2.7.2 Peripheral Device Combinations 2 -22

3Servodrive Characteristics

3.4 Large-amplitude Frequency Characteristics 3 -6

3.5 Mechanical Characteristics 3 -7

3.5.1 Mechanical Strength 3 -7

3.5.2 Allowable Radial and Thrust Load 3 -7

3.5.3 Mechanical Tolerances 3 -8

3.5.4 Direction of Motor Rotation 3 -8

3.5.5 Impact Resistance 3 -8

3.5.6 Vibration Resistance 3 -9

3.5.7 Vibration Class 3 -9

4Configuration and Connections

4.1 Internal Connection Diagram 4 -3

4.1.1 0.5 kW to 1.5 kW Servodrives 4 -3

4.1.2 2.0 kW to 3.0 kW Servodrives 4 -4

4.1.3 5.0 kW Servodrive 4 -5

4.1.4 6.0 kW to 15.0 kW Servodrives •• 4 -6

4.2 Name and Description of Main Circuit Terminals 4 -7

4.3 Applicable Receptacles 4 -7

4.3.1 1CN Connector for I/O Signals 4 -7

4.3.2 2CN Connector for Encoder 4 -7

4.3.3 4CN Connector for MECHATROLINK Communication 4 -8

4.4 Connecting an Incremental Encoder 4 -9

4.4.1 Typical Example 4 -9

4.4.2 1CN I/O Connector Terminals 4 -10

4.5 Connecting an Absolute Encoder 4 -14

4.5.1 Typical Example 4 -14

4.5.2 1CN I/O Connector Terminals 4 -15

4.6 Output Circuits 4 -18

4.7 Connector Terminal Block Converter Unit for 1CN 4 -19

4.7.1 Application 4 -19

4.7.2 Connection Specifications 4 -20

4.7.3 Cable Specifications Accessory (for Connector Terminal Block Converter Unit) 4 -21

4.8 2CN Encoder Connector Terminals 4 -22

4.8.1 2CN Terminal Layout 4 -22

4.8.2 Applicable Cables 4 -23

4.8.3 2CN Connection Method 4 -24

4.9 4CN Connectors for MECHATROLINK Communications 4 -26

4.9.1 4CN Terminal Layout 4 -26

4.9.2 4CN Connection Method 4 -26

5.7 Application Precautions 5 -13

5.7.1 Noise Control 5 -13

5.7.2 Power Supply Line Protection 5 -16

TABLE OF CONTENTS

5Application

5.1 Turning Power ON/OFF 5 -3

5.2 Position Control 5 -4

5.2.1 Electronic Gear Function 5 -4

5.2.2 Feed-forward Control Function 5 -5

5.3 Setting Up a 12-bit Absolute Encoder 5 -6

5.3.1 Battery 5 -6

5.3.2 Absolute Encoder Setup Procedure 5 -6

5.4 Protection Functions 5 -8

5.4.1 Dynamic Brake Function 5 -8

5.4.2 Error Detection Function 5 -8

5.4.3 Servo Alarm Output (ALM, ALM-SG) 5 -9

5.4.4 Handling Protection Circuit Operation 5 -9

5.4.5 Servo Alarm Reset 5 -9

5.5 Indications 5 -9

5.6 Precautions 5 -10

5.6.1 Overhanging Load 5 -10

5.6.2 Load Inertia JL 5 -10

5.6.3 Regenerative Resistor Unit 5 -10

5.6.4 High Voltage Lines 5 -12

5.9 Adjustments 5 -19

5.9.1 Servo System Adjustments 5 -19

5.9.2 User Constants 5 -20

5.9.3 Functions that Improve Response 5 -23

5.9.4 Guidelines for Setting the Load Inertia Ratio 5 -24

6.1 Specifications and Configuration 6 -2

6.1.1 Specifications 6 -2

6.1.2 Control Structure 6-2

6.2 1SW Rotary Switch for MECHATROLINK Station

Address Settings 6 -3

6.3 MECHATROLINK Command List 6 -4

5.8 Appropriate Applications 5 -18

5.8.1 Holding Brake Interlock Signal 5 -18

6MECHATROLINK Communication

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali YASKAWA Servoazionamento

YASKAWA

YASKAWA Sigma-V Series Manuale utente

YASKAWA

YASKAWA E-S Series Manuale utente

YASKAWA

YASKAWA Sigma-V Series Manuale utente

YASKAWA

YASKAWA SGD7S-R70A Manuale utente

YASKAWA

YASKAWA SGM H Series Manuale utente

YASKAWA

YASKAWA SGM7D-30F Manuale utente

YASKAWA

YASKAWA M Series Manuale

YASKAWA

YASKAWA E7LVD002 Manuale utente

YASKAWA

YASKAWA SGMAH Manuale utente

YASKAWA

YASKAWA JUSP-OP05A-1-E Manuale utente

YASKAWA

YASKAWA E-V Series Manuale utente

YASKAWA

YASKAWA SGD7S-R70A20A023F40B Manuale utente

YASKAWA

YASKAWA S-V Seres Manuale utente

YASKAWA

YASKAWA S-V Series Manuale utente

YASKAWA

YASKAWA XtraDrive Series Manuale utente

YASKAWA

YASKAWA UAK series Manuale utente

YASKAWA

YASKAWA SGM-A3 Manuale utente

YASKAWA

YASKAWA E-V-MD Series Manuale utente

YASKAWA

YASKAWA Sigma-7-Series Manuale utente

YASKAWA

YASKAWA E-V Series Manuale utente

YASKAWA

YASKAWA SGD7W Series Manuale utente

YASKAWA

YASKAWA SGMJV Manuale utente

YASKAWA

YASKAWA Sigma Mini SGMM Series Manuale utente

YASKAWA

YASKAWA Sigma-7 SGD7S Series Manuale utente

Manuali Servoazionamento popolari di altre marche

Mitsubishi Electric

Mitsubishi Electric MELSERVO-J5 MR-J5-G Series Manuale utente

Robotis

Robotis XH430-W350-T Manuale utente

NTI AG

NTI AG LinMot C1250 Series Manuale utente

Welcon

Welcon WE2A D048 Series Manuale utente

Parallax

Parallax 900-00005 Manuale utente

Festo

Festo TP 1410 Manuale utente

Axor

Axor MAGNUM 400 Manuale utente

Siemens

Siemens SINAMICS S120 Manuale utente

Danfoss

Danfoss 176F6494 Manuale utente

THORLABS

THORLABS TDC001 Manuale utente

TECO

TECO JSDAP Series Manuale utente

Rockwell Automation

Rockwell Automation Allen-Bradley Kinetix 6000 Manuale utente

GSK

GSK DA98D Manuale utente

Lenze

Lenze m850 Guida

Baumuller

Baumuller b maXX 3000 Manuale

Baumuller

Baumuller b maXX 5000 Manuale

Baumuller

Baumuller b maXX 5500 Manuale

Danfoss

Danfoss VLT HVAC Drive FC 102 Manuale utente