8ORIGINAL INSTRUCTIONS
GB
Recommendations for usage of the product
WARNING! In the case of heating surface cracks you should immediately disconnect the equipment from the power source.
Vessels, which have been made of aluminum foil or plastic, should not be placed on hot surfaces. Any items should not be left
on these surfaces.
Do not place metal objects such as kitchen vessels, cutlery, etc., they should not be placed on the surface of the heating plate,
because they can get hot.
Users, who are wearing rings, watches and similar items should be careful, because they can become hot, If they are near the
surface of induction cooker.
Use only the vessels of recommended types and recommended dimensions. Vessels, which are intended for use in the induction
cookers, should be made of ferromagnetic materials such steel, cast iron, enamelled cast iron and stainless steel intended for
use with the induction cookers. Typically, these vessels are marked with the proper symbol. If you are unsure, please contact the
vessel manufacturer.
Dishes made of diamagnetycznych materials such as: aluminium, copper, glass, including the heat resistant glass, and ceramic
materials, may not be used on an induction cooker, unless they are equipped with a ferromagnetic insert and have proper marking.
Vessels intended for use on an induction cooker must have a flat bottom of suitable diameter. The vessels with a rounded bottom
can not be used on an induction cooker, even if they are made of ferromagnetic materials. Sizes of the vessels, which can be used
on an induction cooker, have been listed in the table of technical data. Do not use vessels with a bottom equipped with footers.
Do not place empty vessels on the cooker. Vessel and cooker can be damaged if you try to heat the empty vessel.
The operation principle of an induction cooker is based on emission of a variable electromagnetic field. People with pacemakers
should avoid handling the induction cooker and staying near the cooker during its work.
WARNING! The surface of the heating plate may be hot after use. Do not touch it because it can cause serious burns. Wait till
the heating plate is cooled down.
In the case of preparation of dishes, that during this operation, may scatter around hot portions of food, you should use personal
protective equipment to prevent burns.
Make sure, that the floor near the cooker is not slippery. This will allow you to prevent slips, which can cause severe injuries.
PRODUCT SERVICE
Installation starting and operation of the product
you should unpack the product, completely remove all the elements of the packaging; it is recommended that you keep the pack-
aging, it may be helpful for later transport and storage of the product.
Wash the product in accordance with the instructions from the point “Product maintenance”.
Put on the product an appropriate, filled vessel.
Connect the power cord plug into the mains wall socket, the control lamp, which is placed over the switch marked “ON/OFF”, will
light up, this means, that the product is powered.
When you press the button marked “POWER”, the power indication will appear on the display and the control lamp, which is
marked as “POWER” will light up. The power is set by the factory on 2000 W. With the buttons, which are marked with arrow
symbols, you can adjust the power for the range specified in the table. The arrow, which is pointing up, increases the power, and
arrow pointing down lowers the power.
When you press the button marked “TEMP.” the temperature display will appear on the display and the control lamp, which is
marked as “TEMP.” will light up. The temperature is set by the factory on 120 OC. With the buttons, which are marked with arrow
symbols, you can adjust the temperature for the range specified in the table. The arrow, which is pointing up, increases the tem-
perature, and arrow pointing down lowers the temperature.
When you press the button marked “TIME”, the working time indication will appear on the display and the control lamp, which
is marked as “TIME” will light up. With the buttons, which are marked with arrow symbols, you can adjust the time for the range
specified in the table. The arrow, which is pointing up, increases the time, an arrow pointing down reduces the time.
If, in the course of work, it is pressed on/off switch, which is marked “ON/OFF”, this will turn off the cooker. When you turn off the
cooker its fan is working for some time to cool down the cooker systems. At this time, you should not disconnect the product from
its power supply.
After work completion you should turn off the cooker by the pressing the button marked as “ON/OFF”, and then remove the vessel
from cooker.
WARNING! When you remove the vessel from cooker you should be very careful. The vessel and cooker plate can are very hot
and can cause serious burns. Use personal protective equipment in the form of gloves and protective clothing.
You should allow the cooker plate to cool down spontaneously, and then proceed to maintenance as described in section “Product
maintenance”
ATTENTION! The cooker will turn off automatically after two hours after the last user’s action.
Maintenance of the product
ATTENTION! All maintenance operations must be carried out when the product power supply is turned off. To do this you should
remove the power cord plug from a mains outlet.
Heating plate and other parts of the product should be cleaned by using a cloth soaked in water solution of mild dishwasher liquid.
