Yedoo Dragstr Manuale utente
ALLOY
DRAGSTR
RODSTR
FRIDAY
FRIDA & FRED
User manual
DRF+Frida_manual-PANTONE.indd 1 22.06.18 10:43
EN 7
CZ 13
DE 19
RU 25
SK 31
Contents
Yedoo
Dragstr 20"/ 20"
Maximum load:
150 kg / 330 lb
Friday 16"/ 16"
Maximum load:
150 kg / 330 lb
Rodstr 20"/ 16"
Maximum load:
150 kg / 330 lb
Frida & Fred 16"/ 16"
Maximum load:
120 kg / 265 lb
Visit our website www.yedoo.eu
for more language versions.
i
2
DRF+Frida_manual-PANTONE.indd 2 22.06.18 10:43
3
Yedoo Dragstr
5 mm4 mm 6 mm +
DRF+Frida_manual-PANTONE.indd 3 22.06.18 10:43
4
5 mm4 mm 6 mm +
Yedoo Rodstr
DRF+Frida_manual-PANTONE.indd 4 22.06.18 10:43
5
5 mm4 mm 6 mm +
Yedoo Friday
DRF+Frida_manual-PANTONE.indd 5 22.06.18 10:43
5 mm4 mm 6 mm +
Yedoo Frida & Fred
6
DRF+Frida_manual-PANTONE.indd 6 22.06.18 10:43
Introduction
We recommend that you entrust the installation, adjustment
and regular maintenance to a specialist bicycle shop. Improper
intervention can lead to damage of the scooter or to an accident
with serious health consequences.
If you are technically capable, do not worry; this manual
contains all the information you need to help you assemble your
new scooter.
Send your questions, comments and suggestions for
improvement of our products by e-mail to: info@yedoo.eu.
EN
7
Yedoo frames are protected by
a Registered Community Design
(RCD), the commercial names
are protected by registered
trade marks.
More information from the
world of scooters and the list
of distributors can be found at
www.yedoo.eu.
DRF+Frida_manual-PANTONE.indd 7 22.06.18 10:43
8
Installation manual
2. 3.1.
The installation is the same for all
models (Dragstr, Rodstr, Friday,
Frida & Fred), it diers only in minor
details (see additional pictures). When
tightening the connections do not
exceed the specified tightening torque.
Installing the front wheel
Insert the quick release mechanism into
the wheel ensuring that on both sides of
the wheel the narrow ends of the springs
face the centre of the wheel.
First check that the front fork of the
scooter is aligned correctly (the V-brake
arms should be pointing forwards
towards the front of the scooter), then
release the brake cable from the guide.
Insert the wheel into the front fork so it
is exactly in the middle. Caution: When
inserting the wheel, ensure that the
arrow on the tyre sidewall points in the
direction of rotation when the scooter
isrolling forwards.
5.4.
Tighten the adjustment nut of the
quick release mechanism to the correct
position. When it is in the correct
position you will feel a noticeable
resistance just before you close the
mechanism completely. Close the
quick release lever in a position
so it does not touch the fork and
simultaneously it cannot be opened
accidentally while riding.
Handlebars installation
Install the handlebar on the stem.
Tighten the screws only slightly so you
can adjust the angle of the handlebars
later on.
Dragstr
5–6 Nm
EN
Direction
of rota-
tion
Rodstr
6–8 Nm
Friday
Frida & Fred
6–8 Nm
DRF+Frida_manual-PANTONE.indd 8 22.06.18 10:43
99 EN
6.a 7.a
8.
7.b 7.c
6.b
Insert the stem into the frame tube of
the scooter and adjust the handlebar
height taking care not to position it
above the marked line, see pic. 6.b.
Make sure that the handlebars are
straight and then tighten the screw
on the stem.
The highest possible height of the
handlebars is marked with vertical
grooves, at the maximum height the
grooves should be visible only partly.
Installing the rear wheel diers from
the front wheel installation.
Release the brake cable from the guide
(1), Put the wheel in one of the two fork
dropouts (see 7.b, 7.c.) then centre the
wheel and tighten the quick release
mechanism (2).
Installing the brake cables
Squeeze the brake lever to the maximum
and insert the end of the brake cable
into the round lug (1). Insert the cable
into the groove and tighten the set
screw (2) and the nut (3). Repeat the
process with the other brake.
The rear brake cable is usually mounted
on the right brake lever and the front
brake wire on the left.
Two-position rear fork enables you to
adjust the height of the footrest above
the ground. Use the lower position
for riding over rough terrain. Close
the quick release lever. It should point
upwards.
The upper fork position, which reduces
the height of the footrest, is designed for
riding on a smooth, flat surface. Riding
will be less physically demanding. The
closed quick release lever should point
downwards.
1
1
2
3
2
20–22 Nm Max
DRF+Frida_manual-PANTONE.indd 9 22.06.18 10:43
10
9. 10.a
Adjusting the handlebars
Adjust the angle of the handlebar
according to the needs and height of
the rider and tighten the screws. A larger
angle gives more space for the rider and
provides a more sporty riding style.
Adjusting the angle of the brake levers
On both brake levers loosen the screw
on the sleeve.
For the best results, stand on the
footrest, grab the handlebars and stretch
your fingers so they extend in a straight
line from your hands. Set the brake
levers in this position and tighten the
two mounting screws, see 10.a.
10.b
For both the front and the rear wheel
the brake adjustment is the same.
Insert the brake cable back into the
guide (1) and check the brake pads
during braking, ensuring thattheir entire
surface fits tightly against the side of the
rim. If not, adjust the screw (2), which
attaches the brake pads to the shoulders
of the V-brakes. The brake pads must not
touch the tyre.
Check that the brake pads move away
from the rim suiciently (1–2 mm) when
the brake lever is released. The distance
of the brake pads can be adjusted by
tightening or loosening the brake cable
anchor bolt (1). If the brake pads come
into contact with the rim while the wheel
spins, adjust the spacing of the brake
arms symmetrically with the tensioning
bolts (2).
Rodstr
Dragstr
11. 12.
11
2
2 2
2
5–6 Nm
5–6 Nm
6–8 Nm
6–8 Nm
Installation manual
EN
Friday
Frida & Fred
DRF+Frida_manual-PANTONE.indd 10 22.06.18 10:43
Altri manuali per Dragstr
2
Questo manuale è adatto per i seguenti modelli
3
Indice
Lingue:
Altri manuali Yedoo Scooter
Yedoo
Yedoo ALLOY Series Manuale utente
Yedoo
Yedoo Wzoom New Manuale utente
Yedoo
Yedoo Mezeq disc Manuale utente
Yedoo
Yedoo OX Manuale utente
Yedoo
Yedoo Mezeq disc Manuale utente
Yedoo
Yedoo S2020 20"/20" Manuale utente
Yedoo
Yedoo Mezeq disc Manuale utente
Yedoo
Yedoo Tidit Manuale utente
Yedoo
Yedoo Mudguards 12/12 Manuale utente
Yedoo
Yedoo ALLOY WOLFER Manuale utente
Yedoo
Yedoo CITY Manuale utente
Yedoo
Yedoo Mezeq disc Manuale utente
Yedoo
Yedoo ALLOY Series Manuale utente
Yedoo
Yedoo Mezeq disc Manuale utente
Yedoo
Yedoo Dragstr Manuale utente
Yedoo
Yedoo One Manuale utente
Yedoo
Yedoo NUMBERS FOUR Manuale utente
Yedoo
Yedoo OX Manuale utente
Yedoo
Yedoo ALLOY DRAGSTR Manuale utente
