Yeedi Cube Manuale utente

INSTRUCTION MANUAL

GEBRAUCHSANWEISUNG

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTION

MANUALE DI ISTRUZIONI

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

cube Robot Vacuum and Mop

่�ือการใ้งาน

BUKU PETUNJUK

產品使用說明書

MANUAL ARAHAN

1. Package Contents/1.1 Package Contents

Robot

(Pre-installed with UFO Water Tank, Dustbin,

Multi-Surface Main Brush,Washable Filter and Easy-

to-Clean Mopping Pad)

Cube Station

(Pre-installed with Dirty Water Tank and Dust Bag)

Detachable Base Station Extension Pad Power Cord

Instruction Manual

Note:

1. All gures and illustrations are for reference only and may present differences in appearance from the actual product.

2. The “Edge Brushes”, ”Water Tank Plug” , “Detachable Base” ,”Station Extension Pad” and “Power Cord” need to be installed by the user prior to use.

3. Accessories from different countries shall be subject to the actual product conguration at the time of purchase, and the patterns are for reference only.

Edge Brushes Water Tank Plug

7EN

1. Package Contents/1.2 Product Diagram

Robot Top View Robot Side View

Robot Bottom View

Vision and Laser

Fusion Navigation

System

Water Tank Lock Pick-up Handle

Charging Contacts

Edge Brushes

Universal Wheel

Ultrasonic Carpet

Detection Sensor

Multi-Surface Main

Brush

Multi-Surface Main

Brush Release Buttons

Driving Wheels

Water Outlet

Anti-Drop Sensors

Dust Disposal Port

Dustbin Release Button

1L UFO Water

Tank

Power Switch

"I"=ON,

"O"=OFF.

Edge Detection

Sensors

Dustbin

Note:

Make sure that the Water Tank Lock is securely locked before lifting the Robot.

CLEAN Button

(Auto Clean Button)

HOME Button

(Return to Station Button)

SPOT Button

(Spot Cleaning

Button)

Floor Tracking

Sensor

UFO Water Tank Cube Station

Dustbin

Dirty Water Tank

Dustbin Cover

Dust Bag

Built-in Electric Scrubber

Detachable Base

Filter

Pick-up Handle

Filter Net

Sponge Filter

High-Efciency Filter

Water Tank LockWater Inlet

Water Tank Plug

1. Package Contents/1.2 Product Diagram

Note:

1. The Detachable Base needs to be installed by the user before use.

2. Lift the mop Built-in Electric Scrubber before installation and put it

down after installation. Otherwise, the Robot's operations will be

affected.

3. The Filter is removable and needs to be cleaned regularly.

Note:

Keep the Water Tank Plug properly. Each time, after you have lled it,

cover the Plug before installing the UFO Water Tank in the Robot.

9EN

2. Mapping and Cleaning/2.1 Notes before Cleaning

Tidy up the area to be cleaned

Put furniture, such as chairs and  oor fans, in

their proper place. Put away low items such

as scales to ensure the maximum cleaning

space.

Open the door to help the Robot explore

During the  rst use, make sure each room door

is open to help the Robot fully explore your

house.

Stop the Robot from falling

It may be necessary to place a physical

barrier at the edge of a drop to stop the

Robot from falling over it.

Put away objects such as wires, cloths, or slippers

that may be on the  oor to improve the mapping

and cleaning ef ciency.

Before using the Robot on a rug with tasseled

edges, please fold the edges under the rug.

Note: Do not use the mopping function on the

carpet.

Please do not stand in narrow spaces such as

hallways so as to avoid preventing the Robot from

identifying the area to be cleaned.

Please make sure that the Robot has created

a home map in the yeedi App before it starts

cleaning.

Please remove all protection materials on the Robot before use.

Install Edge Brushes

Remove all protection materials Lift the Scrubber and install the Detachable Base.

Reset the Scrubber once it has been successfully installed.

Make sure the color of the Edge Brushes is consistent with that of

mounting slot. The "click" sound indicates a successful connection.

Step 1: Lift the Scrubber and a "click" sound will be heard;

Step 2: Push the Detachable Base into the Station on a at surface.

The "click" sound indicates a successful connection.

2. Mapping and Cleaning/2.2 Notes before Using

1 3

Note:

The Robot experience may be affected if protection materials are not

removed.

Note:

The Robot experience may be affected if the Scrubber is not lowered in

time after installing the "Detachable Base".

Lower the Scrubber to nish installation.

11 EN

Put the Cube Station in place and connect it to the power

supply. Install the Station Extension Pad.

Remove the UFO Water Tank.

Step 1: Place the Cube Station against the wall in a large space and

do not place items within a radius of about 0.5 m or 1.5 m in front

of it.

Step 2: Align the dashed line with the edge of the base, with the

rough side facing up, and place it under the base. After putting it

in place,peel off the transparent tape from the smooth bottom and

stick the extension pad onto the hard, non-carpeted oor.

Step 1: Hold the handle on the Water Tank with one hand and slide

down the lock with your thumb to lift the Tank upward.

Step 2: Fill the Tank with clean water and put it back into the Robot

after installing the Plug.

2. Mapping and Cleaning/2.2 Notes before Using

5 6

Note:

1. Cover an area of at least 5 cm height from the bottom of any

reective objects such as mirrors.

2. Do not place the Cube Station in direct sunlight.

3. Periodically wipe off any accumulated water on the Extension Pad

to maintain its anti-slip effect.

4. Please do not move it frequently to avoid affecting the xation of

the extension pad.

>0.5m(1.64’)>0.5m(1.64’)

>1.5m(4.92’)

Note:

1. Please make sure the Tank Plug is installed.

2. To prolong the service life of the Water Tank, it is recommended to

use puried water or softened water.

3. Do not add any cleaning solution from any other brands; excessive

solution could cause the Robot to slip or be damaged.

4. Keep the UFO Water Tank Plug properly.

5. Do not put any foreign objects in the Tank.

facing

upwards

Clean Water

Turn on the power switch, put the Robot near the Cube

Station and press the HOME Button. The Robot will

automatically return to the Station to charge.

Download the yeedi App to experience more functions:

Note:

1. "I"=ON, "O"=OFF

2. The Robot cannot be charged when being powered OFF.

3. When the Robot completes the cleaning or when the battery gets

low, it automatically returns to the Cube Station to recharge.

4. Please make sure that the Robot starts cleaning from the Station.

Do not move the Station while it is cleaning.

2. Mapping and Cleaning/2.3 yeedi

App

After downloading, please complete registration, login, and

the network setup according to the guide in the mobile App

page

Method 1: Open "Scan" in your mobile phone to scan the QR code on the

Robot, download and install the yeedi App according to the

prompts.

Method 2:

Open the mobile App store, search "yeedi", download and

install the yeedi App.

iOS Android

yeedi

Lower side of the UFO

Water Tank

2. Mapping and Cleaning/2.2 Notes

before Using

①

Turn on the power

switch.

②

The Robot will

automatically return to

Station to charge by

pressing the HOME

Button.

③

It will charge for about 6.5 hours until fully

charged.

13 EN

2. Mapping and Cleaning/2.4 Connect the Robot to the Mobile Phone

Network setup steps:

1. Please turn on your mobile phone Bluetooth and Wi-Fi;

2. Make sure that yeedi cube Robot Vacuum and Mop is on;

3. Open the yeedi App;

Scan the QR code on the Robot using the yeedi App, complete

"Conrm access to the setup mode", "conrm the device and

Wi-Fi to be connected", and "enter the Wi-Fi password"

respectively according to the prompts in the App, and then wait

for the setup result;

5. If the network setup fails, it is recommended that you try again

according to the above steps, or choose other network setup

methods according to the prompts in the App.

Note:

If you have any problems during the Wi-Fi setup process, refer to the

Troubleshooting section in this manual.

Slowly ashing white light

Disconnected from Wi-Fi

or waiting for home Wi-Fi

connection

Rapidly ashing white light Connecting to home Wi-Fi

Solid white Connected to home Wi-Fi

2Function of the SPOT Button (Spot Cleaning Button)

2. Mapping and Cleaning/2.5 Robot Operation Buttons

1Function of the CLEAN Button (Auto Clean Button)

• Please ensure that the Robot is on the Cube Station and is fully

charged before starting.

• Press the CLEAN Button to start the rst mapping and Auto Clean.

• When the Robot is working, press the CLEAN Button to stop

cleaning and press again to continue.

• Press and hold for 2 seconds to end the current cleaning task.

• Please place the Robot in the area to be cleaned before starting.

• Press the SPOT Button to start the Spot Cleaning task, which

will focus on the 1.5*1.5 meters area centered on the Robot (the

Cleaning Settings can be modied in the App).

• When the Robot is working, press the SPOT Button to pause

cleaning and press again to continue.

• Move the Robot to end the current Spot Cleaning and start the

next one by pressing the SPOT Mode Button again.

Altri manuali per cube

Indice

Altri manuali yeedi Aspirapolvere

Manuali Aspirapolvere popolari di altre marche

Bissell

Bissell LittleGreen Proheat 1425 Series Manuale utente

Panasonic

Panasonic MC-YL637S147-AE Manuale utente

NEFF

NEFF N17XH10 0 Series Manuale utente

LG A9 Series Manuale utente

Oreck

Oreck Cordless Captura BK51700 Series Manuale utente

Kogan

Kogan KAVACROBVWA Manuale utente

Kränzle

Kränzle VENTOS 50 ID Guida utente

EVVO

EVVO Ai35 Manuale utente

DeWalt

DeWalt DWH200D Manuale utente

Pontec

Pontec Pondomatic Vacuum Cleaner Manuale utente

Cleanmaxx

Cleanmaxx PC-P007E Manuale utente

Exido

Exido 240-114 Manuale utente

RIDGID

RIDGID WD1685AU0 Manuale utente

Ezviz

Ezviz RE4P Manuale utente

STG global

STG global TANVAC HDV3000 Manuale utente

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuale utente

Factory

Factory M3340 Manuale utente

Shop-Vac

Shop-Vac VN92 SERIES Manuale utente

yeedi cube Manuale utente

Manuali Aspirapolvere popolari di altre marche