Yescom YES5062 Manuale utente
Car Awning
User Manual
NOTE:
The car shown in this user manual is for illustrative purpose only. It is not
included in this product.
Safety Instructions
1. Check bolt connections and the roof bars at regular intervals.
2. Please ensure that the roof rack is installed in the correct locations.
3. The awning should be kept away from fire and inflammable objects.
4. Keep children and pets out of work area during assembly and
adjustment.
5. Use caution in windy conditions! Do not use awning in excessively
windy conditions!
6. If you are not thoroughly familiar with the installation procedures, you
should have the product installed by a professional installer.
7. Always secure the awning with stake and ropes. Failure to do so may
result in injury as well as damage to the product and your vehicle if
the awning is lifted by unexpected wind.
8. IMPROPER ATTACHMENT COULD CAUSE SERIOUS BODILY INJURY.
USERS ARE RESPONSIBLE FOR SECURING THE AWNING AND
ACCESSORIES TO YOUR CAR, CHECKING THE ATTACHMENTS BEFORE
USE.
Package Contents
Long Screw Kit x 4
Short Screw Kit x 4
Stake x 2
Rope x 2
Plastic Peg x 4
Bracket Kit x 2
Page 1
Car Awning x 1
Installation Instructions
1
Install two pairs of bracket kits on the roof bar of your car with long screw
kits.
Long Screw
2
Slide the 4 short screws inside the grooves of the car awning.
3
Mount the car awning on the brackets with the nuts of the short screw
kits. (Adjust the position of the screws if necessary.)
Page 2
4
Unlock the buckles and
unzip the zipper
5
Stretch out the awning.
6
Unfold the two side poles as shown. Extend them and secure their ends
with the front-end bar as shown.
Page 3
Unfold the two supporting poles as shown. Extend them as shown.
7
Use the ropes, stakes and the plastic peg to further secure the awning.
8
Page 4
2 Ways of Installation
OR
Besides installing the awning on the side of your car, you can also install
it on the rear side.
Indice
Altri manuali Yescom Accessori per automobili
