YESKAMO TJ06-3MP Manuale utente
YESKAMO®
Floodlight IP Camera Users’ Manual
PIR Moon Acvated Alarm Camera with Floodlight
www.yeskamo.com
I.Statement
Thank you for purchasing YESKAMO PIR WIFI Camera with
floodlight.
The PIR alarm camera has a built in PIR sensor and floodlights,
when camera catches any suspicious acvies in its detecon
area, you will get an alert message through the phone or siren
alarm from camera side. At night, the floodlight will also
automacally switch on when any suspicious acvies is
detected and colour vision will then be enabled to film any
unexpected movement. The built in microphone and speaker
on camera lets you hear and speak to the people on your
property.
The PIR alarm camera can be used as a standalone wifi
camera and can be also integrated with YEKSMAO wireless NVR
system for any home and business surveillance. No maer you
are looking for a single wifi camera or looking to expand you
wireless security system, YESKAMO PIR Alarm camera will meet
your demand.
YESKAMO Technology Co. Ltd
-1-
Website
Email
Tel
www.yeskamo.com
yeskamoser[email protected]
+44 20 3807 4763 (UK)
yeskamser[email protected]
+1 830 745 5888 (US)
Power Cord
RJ45 Port
PIR Sensor
3.6mm Camera Lens
Floodlight
IR Cut Filter
IP66 Weatherproof Shell
WIFI Antenna
Microphone
Speaker
TF Card Slot
Indicator Light
IR LED*4
Reset Button
PIR Alarm camera with Floodlight
1
2
3
4
II.Product Descripon
-2-
Microphone: Pick up audio
Speaker: transmit sound
IR Cut Filter: auto switch day/night mode
IR LED: IR leds will automacally switch on at darkness for
night vision
5
6
7
8
9
11
13
12
10
III. Installaon angle for PIR alarm camera
Floodlight: will turn on automacally in the darkness when
PIR sensor was triggered.
PIR (passive infrared) Sensor: detect objects in its view field.
3.6mm Lens: provides wide viewing angle up to 90°;
Weatherproof IP66 Housing: working temperature: -20℃/-4
℉to 60℃/140℉;
2-Axis Mounng Bracket: adjust installaon angle and
vandal-proof inside cable. 360° all-round swiveling and 90°
up-down adjusng;
RJ-45 Ethernet port: A: Add the camera to YESKAMO
NVR recorder as a standard NVR kits if you want
B: Wired connect the camera to internet if you are you
failed to congurate it for wireless connecon
Power-in Port: connect with provided 12V 1A plug for
power supply.
TF Card slot: Insert TF Card for video storage. (Max
support 128G TF Card, TF card must be FAT32 format)
Reset buon: Press and hold reset buon about 5-10
seconds to restore camera to factory seng.
The detect angle for PIR Sensor is about 110 degree, and
detecon distance is within 8 meters. So the recommended
installaon height is Not higher than 3-4 meters, 3m/10
will be beer, and recommended angle is transverse-
ly-mounted with the PIR detecon area. (Make the detecon
area as a sector area like below picture shows)
-3-
Note: A passive infrared sensor (PIR sensor) is an electronic
sensor that measures infrared (IR) light radiang from objects
in its field of view. They work enrely by detecng infrared
radiaon (radiant heat) emied by or reflected from objects.
But somemes, it might be affected by airflow, such as rain or
wind, which may cause same false alarms. So it is suggested to
install the PIR camera is a shaded area, such as eaves, to
prevent accelerated wear and tear the elements might cause
When people transversely
across PIR detecon area as
above picture, the camera will
detect the movement sooner.
When people goes straight to
camera as above picture, the
PIR sensor will not so sensive
-4-
1
2
IV. Descripon about PIR wifi camera with floodlight
This alarm camera has a built in PIR sensor and floodlights,
when camera catches any suspicious acvies in its detecon
area, you will get an alert through the phone or camera. Shine
a light on suspicious acvity with 4 PIR acvated ultra-bright
floodlights and colour vision will then be enabled to film any
unexpected movement at night. Video image is black /white
when there is no any movement in the darkness.
The camera works with or without NVR recorder, PIR alarm
camera can be used as a standalone wifi camera, which you
can view directly on the phone app; Or you can add the PIR
Camera to a yeskamo NVR recorder as would be for a standard
NVR camera kits.
The camera has a built in PIR sensor and moon sensor, you
will get an instant phone app alert and/or siren alarm when
any suspicious acvies is detected.
-5-
Video image is black
/white in darkness when
there is no any suspicious
movement
Shine a light on suspicious
acvity with 4 PIR Acvated
ultra-bright floodlights and
record colored video for that
unexpected movement
Instant phone app alert
will be pushed when any
suspicious movement is
detected
3
V.Configuraon on Phone App:
The camera has a built in IR leds and floodlight leds, IR led
will automacally switch on when ambient light is insufficient
and will create clear black/white videos, the floodlight will
come on automacally (in the darkness) ONLY when any
suspicious acvies is caught on camera and will then allow for
colour video recording for the unexpected acvity. (Floodlight
will NOT turn on at day me)
Connect the camera with supplied 12V 1A adapter, then
plug the adapter to nearby power socket.
Search the APP “IP Pro3” or “EseeCloud3” in App store or
Google play.
If you can’t find it , please scan below QR Code (Please keep
updang the phone app version)
Support Android 4.0 or higher version, iOS 8.0 or higher version
EseeCloud3
1.Power on camera
2.Download phone app
IP Pro3
-6-
1
2
Register an account with your email address /phone number
and password. A verificaon code will be send via text.
Reset camera: Press and hold the reset buon of camera
about 5-10 seconds unl hear a voice prompt “ restore baery
reseng, camera will restart automacally”
Add device on phone app
Enter APP > My Device > tap “+”Icon> WIFI Camera
3.Create an account and login phone app
4.Add device on phone app
-7-
Add device on android phone
-8-
Step1: Choose “ NO” on the interface “ Please check if the
device has a network cable interface” (Default choose “No”
although there is an RJ45 network cable on the camera)
Step2: Choose “yes” on the interface “Does indicator light of
the device blink”when you hear voice prompt “start configura-
on mode”
(default choose “YES” directly, actually the indicator light does
NOT blink)
Indice
Altri manuali YESKAMO Telecamera di sicurezza
