Yolink YS8006-UC Guida
X3 Temperature
& Humidity Sensor
YS8006-UC
Installation Manual & User Guide
Rev 1.0
August 19, 2022
SECTION TOPIC PAGE
A Welcome! 1
B Introduction 2
C What's in the Box? 3
D Install the YoLink App 4
E Add Your X3 T/H Sensor to the App 6
F Installation 8
G Get to Know Your X3 T/H Sensor 9
H Sensor Refresh Frequency 10
I App Functions: Device Screen 11
I App Functions: Device Details Screen 12
I App Functions: Alert Settings Screen 13
I App Functions: Chart Screen 14
I App Functions: Alarm Strategies Screen 15
I App Functions: Automation 16
J Third-party Assistants & Integrations 17
K Firmware Updates 18
L Factory Reset 18
M Specifications 19
N Warnings 20
O 2-Year Limited Electrical Warranty 21
P FCC Statement 22
Q Contact Us & Customer Support 23
TABLE OF CONTENTS
User Guide Conventions
To assure your satisfaction with your purchase, please read
this user guide we have prepared just for you. The following
icons are used to convey specific types of information:
Very important information (can save you time!)
1
Good to know info but may not apply to you
Mostly unimportant (it’s ok to breeze past it!)
Thank you for purchasing YoLink products!
Whether you are adding additional YoLink products or if
this is your first YoLink system, we appreciate you
trusting YoLink for your smart home & automation
needs. Your 100%satisfaction is our goal. If you
experience any problems with your installation, with our
X3 Temperature & Humidity Sensor or if you have any
questions that this manual does not answer, please
contact us right away. See the Contact Us section for
more info.
Thank you!
Eric Vanzo
Customer Experience Manager
Welcome!
A
Introduction
B
The YoLink X3 Temperature & Humidity Sensor is a smart
wireless combination thermometer and hygrometer. By
monitoring the real-time temperature and humidity levels
at the sensor location, it can provide you with the current
conditions as well as alert you to off-normal conditions.
For full functionality, your smart X3 Temperature &
Humidity Sensor connects to the internet by connecting
wirelessly to one of our hubs (original YoLink Hub or the
SpeakerHub), not via WiFi or other wireless methods. If you
do not not already have a YoLink hub, and unless there is
an existing YoLink wireless network in your building (e.g.
apartment complex or high-rise condominium building),
please purchase and set-up your hub before proceeding
with the installation of your new sensor.
The X3 Temperature & Humidity Sensor has on-board
memory capable of storing over 5000 events. If your sensor
loses its connection to the internet, it is capable of storing
and later uploading recorded events to the cloud (making
them available to you via the app, for viewing and
exporting, etc.). For example, if set for 1 minute intervals,
the sensor can store at least 30 days of sensor data.
Recording intervals are set in the app (see page 12).
The original YoLink Hub or the SpeakerHub is
required for full functionality.
2
What’s in the Box?
C
X3 Temperature & Humidity Sensor
Quick Start Guide
3
Retain your username and password in a secure location
If you encounter an error message attempting to create
an account, disconnect your phone from WiFi, and try
again, connected only to the cellular network
Apple phone/tablet
iOS 9.0 or higher
Android phone/tablet
4.4 or higher
Install the YoLink App
D
If you are new to YoLink, please install the app on your phone or
tablet, if you have not already. Otherwise, please proceed to part
E.
Scan the appropriate QR code below or find the “YoLink app” on
the appropriate app store.
Open the app and tap Sign up for an account. You will be
required to provide a username and a password. Follow the
instructions, to set up a new account
Allow notifications, if prompted.
1
4
Install the YoLink App, Continued
D
QR code scanner icon
You will immediately receive an email from
no[email protected] with some helpful information. Please
mark the yosmart.com domain as safe, to ensure you receive
important messages in the future.
2
Log in to the app using your new username and password. The
app opens to the Favorite screen, as shown. This is where your
favorite devices will be shown. You can organize your devices
by room, in the Rooms screen, later.
3
Tap Add Device (if shown) or tap the scanner icon
4
5
XXX
Add Your X3 T/H Sensor to the App
E
Approve access to the camera, if requested. A viewfinder will
be shown on the app.
5
Hold the phone over the QR code (on the rear of the X3 T/H
Sensor) so that the code appears in the viewfinder. If
successful, the Add Device screen will be displayed
6
Refer to Figure 1 on the next page. You can edit the name of
the X3 T/H Sensor, and assign it to a room, if desired. Tap
the Favorite heart icon to add this device to your Favorites
screen. Tap Bind device
7
5
6
If successful, close the Device Bound pop-up message by
tapping Close
8
Tap Done as shown in Figure 2.
9
If this is your first YoLink system, please visit our product
support area at yosmart.com for an introduction to the app,
and for tutorials, videos, and other support resources.
Ensure your YoLink Hub or SpeakerHub is setup and online
before proceeding to the next step.
10
Figure 1
EAdd Your X3 T/H Sensor to the App, Cont.
Figure 2
7
Wall-Mounting
Install wall anchor
in the wall
Install screw in anchor
(or nail in wall)
with about 1/8" gap left
Hang sensor on screw (or nail)
using the mounting slot
These items may be required for the wall-mounting:
Self-tapping screw nail Wall anchor
HammerPhillips screwdriverDrill
Installation
F
If not already turned on, press the SET button once to turn on
the device. Place the sensor at the desired location.
1
2
Ensure your device is placed on a stable surface or mounted
securely on a wall or other surface.
Please refer to device environmental operating range
information on part M. Use this device outside the recommend
ranges at your own risk.
8
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Yolink Regolatori di temperatura
